DOPO 452A-L0107A SUEVIS Garden Lamp Instructions
- June 12, 2024
- DOPO
Table of Contents
DOPO 452A-L0107A SUEVIS Garden Lamp
Product Information
- Product Name: SUEVIS
- Model Number: 452A-L0107A
- Wattage: 7W
- Color Temperature: 3000K
- Luminous Flux: 750lm
- Power Supply: 110-240V~ 50/60 HZ
- IP Rating: IP54
- LED Type: LED
Product Usage Instructions
- The installation of this product should be carried out by qualified personnel or authorized service technicians.
- The light source contained in this luminaire should only be replaced by the manufacturer, his service agent, or a similarly qualified person.
- This product is suitable for both indoor and outdoor use, in accordance with the indicated IP rating.
- Do not attach the luminaires to surfaces that are damp, freshly painted, or otherwise electrically conductive.
- When connecting the wires of the luminaire, match them with the wires of the same color that come from the wall or ceiling.
- Ensure that the support systems used are suitable for the weight of the luminaire.
- Keep the wires and connections separated from any heat source.
- To avoid damage to concealed wiring during installation, determine the direction of the supply cable before drilling and fixing holes.
- Keep these instructions in a safe place for future reference.
- Use sleeves to cover the main supply wiring to the fitting.
- Cleaning should be limited to the outer surfaces, shades or protective glass, reflectors, and covers. Gold-finish and brass luminaires should only be cleaned with a soft cloth, avoiding the use of cleaning agents.
- As our products are subject to technical modifications, it is recommended to contact our technical department for up-to-date information.
- Under no circumstances should the luminaire be covered.
- Avoid hanging or placing objects on the luminaires.
This product contains a light source with energy efficiency class F.
Should the glass break, the product cannot be used and you should contact the manufacturer for its replacement.
The safety of this luminaire is guaranteed only if you comply with these instructions; remember to conserve it in a safe place.
Ensure adequate voltage and frequency are supplied to the equipment.
Disconnect from the main power before performing any maintenance.
The installation should be carried out by qualified personnel.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Suitable for indoor and outdoor use, taking the indicated IP rating into consideration
Keep away from direct contact with the ground and chemical substances. A pedestal at a higher level is required.
Technical data: see fixture label
SAFETY INSTRUCTIONS
- Electrical appliances must only be connected by competent persons.
- Important! Before commencing installation work disconnect the mains cable from the power supply – remove the fuse or turn the switch to “OFF”! The power supply connection must be done with a suitable connecting box, as seen on the illustrations.
- Suitable for indoor and outdoor use, taking the indicated IP rating into consideration.
- Do not attach luminaires to surfaces that are damp, freshly painted, or otherwise electrically conductive.
- Connect the wires of the luminaire to the wires of the same color that come from the wall or ceiling.
- Use support systems that are in accordance to the weight of the luminaire.
- Keep the wires and connections separated from any heat source.
- To avoid damage to concealed wiring during installation, establish the direction of the supply cable before drilling and fixing holes.
- Keep these instructions in a safe place.
- Use sleeves to cover the main supply wiring to the fitting.
- Cleaning is limited to the outer surfaces, shades or protective glass, reflectors, and covers. Gold-finish and brass luminaires must be only be cleaned with a soft cloth (do not use cleaning agents of any kind). It is important to ensure that no moisture enters the terminal compartment or reaches any live parts!
- As our products are subject to technical modifications, we cannot guarantee, that all information is always up to date. Please contact our technical department with any queries.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
- Do not cover the luminaires with insulating material.
- Do not use luminaries with frayed or cracked glass, until it is replaced
- Not hanging or supporting elements on the luminaires.
- The cable of the luminaire may not be placed underground.
SYMBOLOGY
Protection class I: This luminaire has an earth terminal
Protection class II: This luminaire is doubly insulated and must not be
connected to an earth wire.
Protection class III: Luminaire for protective low voltage (SELV)
Minimum distance from lighted objects
Low pressure: For luminaries which are designed for use with self-shielded
tungsten halogen lamps only.
N Recessed luminaire not suitable for direct mounting on normally flammable
surfaces
Surface luminaire not suitable for direct mounting on normally flammable
surfaces
Luminaires are not suitable for covering with thermally insulating material
Replace any cracked protective Shield
Where affixed on the equipment or package, the barred waste bin sign indicates
that the product must be separated from other waste at the end of its working
life for disposal.
Replaceable control gear by a professional
Replaceable control gear by an end-user Non-replaceable control gear
Replaceable light source by a professional.
Replaceable light source by an end-user.
Non-replaceable light source
SUPPLY CONNECTION
Dust-protected and protected against jets of water.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>