Tefal NC00151722 Home Chef Smart Pro IH Multicooker Instruction Manual

HOME CHEF
Smart Pro IH Multicooker
www.tefal.com

| |
---|---|---
| |

SAFETY WARNINGS

SAFETY INSTRUCTIONS
Take the time to read all the following instructions carefully.

• This appliance is not intended to be operated by means of an external timer or separate remote control system.

• Indoor use only.

•  For cleaning your appliance, please refer to instructions for use. You can wash the cooking bowl and steam basket in soapy hot water. Clean the body of the appliance using a damp cloth.

•  Do not immerse the appliance in water.

•  Improper use of the appliance and its accessories may damage the appliance and cause injury.

• Do not touch hot parts of the appliance. After use, the heating element surface is subject to residual heat after use.

• For your safety, this product conforms to all applicable standards and regulations, (Electromagnetic Compatibility, Food Compliant Materials, Environment, …).

•  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

•  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Do not replace the power cord supplied with other cords.

• This appliance is intended for domestic household use only.
  It is not intended to be used in the following applications and the guarantee will not apply for:
  – staff kitchen areas in shops, offices, and other working environments;
  – farmhouses;
  – by clients in hotels, motels, and other residential type environments;
  – bed and breakfast type environments.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

•  Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

• Children shall not play with the appliance.

• Do not fill your appliance more than the MAX mark on the pot.

• Please follow the recommendations on the volume of food and water to avoid the risk of boiling over which can damage your appliance and cause injury.

• Caution : do not spill liquid on the connector.

• Before using your appliance, check that the float valve and the pressure limit valve are clean (see section Cleaning and maintenance).

• Do not place any foreign objects in the pressure relief system. Do not replace the valve.

•  When you open the lid, always hold it by the lid knob.
  Position your arms in alignment with the side carrying handles. Boiling water could remain trapped between the gasket support and the lid and could cause burns.

• Be careful also about the risk of scalding from the steam coming out of the appliance when you open the lid. First open the lid very slightly to allow the steam to escape gently.

• Never force the appliance open. Make sure that the inside pressure has returned to normal. Do not open the lid when the product is under pressure. To do so, see the Instructions for use.

• Use only the appropriate spare parts for your model. This is particularly important for the sealing gasket, the cooking pot and the metal lid.

• Do not damage the sealing gasket. If it is damaged, have it replaced in an Approved Service Centre.

• The heat source necessary for cooking is included in the appliance.

• Do not place the appliance in a heated oven or on a hot hob. Do not place the appliance close to an open flame or a flammable object.

• Do not heat the cooking pot with any other heat source than the heating plate of the appliance and do not use any other pot. Do not use the cooking pot with other appliances.

• Do not move the appliance when it is under pressure. Do not touch hot surfaces. Use the carrying handles when moving it and wear oven mitts, if necessary. Do not use the lid knob to lift the appliance.

• Do not use appliances for anything other than the intended purpose.

• This appliance is not a sterilizer. Do not use it to sterilize jars.

• The appliance cooks food under pressure. Incorrect use may cause risks of burns due to steam.

• Make sure that the appliance is properly closed before bringing it up to pressure (see Instructions for use).

• Do not use the appliance empty, without its pot or without liquid inside the pot. This could cause serious damage to the appliance.

• After cooking meat which has an outer layer of skin (such as ox tongue), which could swell due to the effects of pressure, do not pierce the skin after cooking if it appears swollen: you could get burnt. Pierce it before cooking.

• Do not use the appliance to cook food (such as beans, noodle or dried food etc.) that expands during cooking. It may stuck the floater and cause danger.

• Do not use the appliance to fry food in oil. Only browning is allowed.

• In browning mode, be careful of risks of burns caused by spattering when you add food or ingredients into the hot pot.

• During cooking and automatic steam release at the end of cooking, the appliance releases heat and steam. Keep your face and hands away from the appliance to avoid scalding. Do not touch the lid during cooking.

• Do not use a cloth or anything else between the lid and the housing to leave the lid ajar. This can permanently damage the gasket.

• Do not touch the safety devices, except while cleaning and maintaining the appliance in accordance with the instructions given.

• Make sure that the bottom of the cooking pot and the heating element are always clean. Make sure that the central part of the heating plate is mobile.

•  Do not fill up your appliance without its cooking pot.

•  Use a plastic or wooden spoon to prevent any damage to the non-stick coating of the pot. Do not cut food directly in the cooking pot.

• If a great deal of steam is released from the rim of the lid, unplug the power cord at once and check whether the appliance is clean. If necessary, send the appliance to an Approved Service Centre for repair.

• Do not carry the appliance by holding it by the lid knob. Always use the two side handles on the housing of the appliance or hold the housing directly. Wear oven mitts if the appliance is hot. For more safety, make sure that the lid is locked before transporting the appliance.

• If pressure is released continuously through the valve of the appliance (for more than 1 minute) while pressure cooking, send the appliance to a service centre for repair.

• Do not use a damaged appliance. Take it to your approved service centre.
  SAVE THESE INSTRUCTIONS CAREFULLY.

•  Use only spare parts sold in an approved service centre.

•  The warranty does not cover the abnormal wear and tear of the cooking pot.

• Read these instructions for use carefully before using your appliance for the first time. Any use which does not conform to these instructions will absolve the manufacturer from any liability and void the warranty.

• In accordance with current regulations, before disposing of an appliance no longer needed, the appliance must be rendered inoperative (by unplugging it and cutting off the supply cord).

Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

DESCRIPTION

1.  Steam cover

2. Pressure limit valve

3.  Lid knob

4. Control panel
   a Cooking process indicator b My recipes c Add ingredients button d Multi cook selection button e Timer/ delayed start button f Reduce key g Increase key h Pressure/ temperature selection button i Pressure cook selection button j Keep warm/cancel

5. Lid

6.  Opening button

7. Power cord

8. Condensation collector

9. Steam basket

10. Nonstick cooking pot

11.  Stainless steel cooking pot

12. Detachable inner lid

13. Sealing gasket

14. Inner lid fixation

15.  Inner lid support

16. Float valve

17. Lid hook

18. Measuring cup

19. Rice ladle

20.  Soupspoon k Start

21. Top lid sensor

BEFORE FIRST USE

• To open the lid, take hold of the lid knob, turn it anticlockwise and push the locking button – Fig. 1, Fig. 2.
• Remove all packaging materials from the inside of the appliance – Fig. 3
•  Clean the parts of the appliance thoroughly before using it for the first time.
• Dry off carefully.
  Note: For more details, see the “ Cleaning and Maintenance” paragraph. Page 21.

PREPARATIONS BEFORE COOKING

1.  Put the condensation collector into place – Fig. 4
2. Open the lid and put ingredients in the pot, wipe the outside and bottom of the cooking pot dry. Place the cooking pot in the appliance.
3. Turn the lid knob clockwise to lock the lid. When the appliance is charged, it will beep twice if the lid is locked and the appliance is charged – Fig. 6
4.  Position the pressure limit valve and take care that it clicks well into place – Fig. 7
5.  Unroll the power cord and connect it to the earthed socket – Fig. 8

Note :

•  The level of foods and liquids should never exceed the max level marking on the cooking pot – Fig 5.
• Do not use the appliance to cook food (such as beans, noodles or dried food, etc.) that expands during cooking. It may stick the float valve and cause danger.
• When cooking rice and other sticky ingredients, use a nonstick inner pot to avoid sticking.
• After the cooking process is started, you can long-press the Keep warm/ Cancel button to terminate the current program and the appliance goes to standby mode.

| Cooking program – Multi-cook Programs| | Lid status|
---|---|---|---|---
| cooking
temperature temperature| Adjustable
cooking
temperature| Default
cooking
time| Adjustable
pressure
keeping
time| Delayed
start| | |
Slow Cook Low| 70 °C| /| 8 hours| 2 ~ 12hours| •| | •|
Slow Cook
High| 90 °C| /| 6 hours| 2 ~ 12
hours| •| | •|
Saute/ Sear| 150 °C| /| 2 minutes| 2 ~ 59
minutes| /| | •| •
Sous Vide| 58 °C| 58 – 90 °C| 3 hours| 10 minutes
~ 20 hours| /| | •|
Bake| 120 °C| 120-150 °C| 45 minutes| 40 ~ 59
minutes| •| | •|
Sauce
Thickening| /| /| 8 minutes| 5 ~ 15
minutes| /| | | •
DIY| 100 °C| 60 ~ 150 °C| 30 minutes| 5 minutes ~
4 hours| /| •| | •

Note :

•  The preheat time of Saute/Sear may take up to 5 minutes.
•  To use Sauce thickening and Saute/Sear program, you need to open lid and start the program.

pressure
keeping
time| Adjustable
pressure
cooking
time| Default
pressure| Adjustable
pressure
range| Delayed
start| | |
Quick Rice| 14 minutes| /| 30 kPa| 20 ~ 50 kPa| •| •| |
Porridge/
Congee| 20 minutes| 15 ~ 30
minutes| 30 kPa| 20 ~ 50 kPa| •| •| |
Beef/Lamb| 30 minutes| 30 ~ 59
minutes| 60 kPa| 20 ~ 70 kPa| •| •| |
Chicken/
Duck| 15 minutes| 12 ~ 29
minutes| 40 kPa| 20 ~ 70 kPa| •| •| |
Soup| 20 minutes| 20 ~ 59
minutes| 30 kPa| 20 ~ 50 kPa| •| •| |
Steam*| 8 minutes| 3 ~ 20
minutes| 10 kPa| /| •| •| |
Abalone| 5 hous 25 minutes| /| 60 kPa| /| •| •| |
Small
Big| 9 hous 55 minut| /| 60 kPa| /| •| •| |

GENERAL INFORMATION FOR COOKING UNDER PRESSURE

• An EPC (electrical pressure cooker) is an electric pan with a hermetic lid and a special valve, that allows cooking the food under pressure, which saves cooking time and makes the stiff foods soft.
• The following programs cook automatically under pressure: Quick Rice, Porridge/Congee, Beef/Lamb, Chicken/Duck, Soup, Steam, Abalone. For the DIY function you will enter a cooking pressure state if you select at least 100°C, with the lid closed and locked.
• Once you have selected your program, the time to reach the pressure will depend on the amount of food and liquids in the cooking pot. The lid must be closed and locked to reach a pressure state: as the appliance is hermetically closed, when the temperature increases, the liquid inside forms steam which raises the pressure in the pot (thus when preparing with pressure there should be always liquid inside the bowl).
• Once pressure has built up in the appliance, the lock mechanism system is activated and then the lid will not be able to be opened during cooking (so all ingredients must be added at the beginning of cooking). Never attempt to open the lid during pressure cooking. When the pressure for cooking is reached, the appliance switches automatically to the cooking phase, and the time previously set starts counting down.
• When the food is cooked under pressure, after the cooking process the appliance will switch to keep a warm state. The digital screen will indicate ‘’b’’.
• When using the pressure cooker for the first few times, you may notice slight steam leakage from the lid. This is normal and will occur when pressure builds up. Some leakage from the pressure limit valve may also occur during cooking.
• It is normal for a small amount of steam to escape during cooking (as the valve is a safety valve). Opening the lid after pressure cooking
• After cooking under pressure, steam will be released automatically, it will take from a few seconds to 10 minutes depending on the quantity of liquid inside.
• To open the lid, take hold of the handle, turn it anticlockwise, and push the opening button -1-2. Unplug the power cord.
  Note: Be careful of the hot steam coming out from the lid. Keep your face and hands away from the steam flow.

PRESSURE COOKING

Quick rice, Porridge/Congee, Beef/Lamb, Chicken/Duck, Soup, Steam, Abalone are pressure cooking programs.

1. Follow the steps in “Preparations before cooking”.
2.  Press “Pressure Cook” to choose cooking programs. The chosen programs lights up, the default pressure Cooking time is displayed on the screen – Fig. 9
3.  Press “+/-” to change the pressure Cooking time – Fig. 10
4.  Press “Pressure/Temp” to change the cooking pressure. The default cooking pressure is displayed on the screen – Fig. 11
5.  Press “+/-” to change the cooking pressure – Fig. 12
6. Press “Start” to start the cooking program. The appliance starts to heat up. The light of “heating up” lights up – Fig. 13
7.  When the pressure for cooking is reached, the appliance switches automatically to the pressure cooking phase, and the time previously set starts countdown.
8. When the pressure-keeping time has elapsed, the appliance beeps and releases pressure automatically.
9. The appliance will jump to keep warm automatically when the pressure released completely except for some programs. You can unlock and open the top lid.

Note :

•  Some programs can’t be changed the pressure cooking time or cooking pressure parameter. Please see the detail in the Pressure Cooking Programs chart.

RICE COOKING

1.  Pour the required quantity of rice into the cooking pot using the measuring cup provided. Then fill with cold water up to the corresponding “CUP” mark printed in the bowl.
   Note : Always add the rice first otherwise you will have too much water.

2.  For best results, we recommend using ordinary rice rather than “easy cook” type of rice which tend to give a stickier rice and may adhere to the housing. With other types of rice, such as brown or wild rice, the quantities of water need adjustment.

3.  If you only want to cook 1 cup of white rice (serves 2 small or 1 large portion), use 1 measuring cup of white rice and then add one and a half measuring cup of water. With some types of rice it is normal for a little rice to stick on the housing when cooking 1 cup of rice.

4. If you only want to cook 2 cups of white rice (serves 4 small or 3 large portions), use 2 measuring cups of white rice and then add two measuring cups of water.

5. The maximum quantity of water + rice should not exceed the highest mark inside the bowl. Depending on the type of rice, quantities of water may need adjustment.

COOKING GUIDE FOR RICE

Rice measurement in cups| Weight| Water measurement in the
bowl (+ rice)| Serves
2| 300 g| 2 cup mark| 2 – 4 pers.
4| 600 g| 4 cup mark| 4 – 8 pers.
6| 900 g| 6 cup mark| 6 – 12 pers.
8| 1200 g| 8 cup mark| 8 – 16 pers.
10| 1500 g| 10 cup mark| 10 – 20 pers.

ADD INGREDIENTS

Beef/Lamb, Chicken/ Duck, Steam, Soup cooking programs are available for this function.

1. With this function, you can open the lid during the pressure-cooking process and add more ingredients.
2. After choosing the pressure cooking program, press the “Add Ingredients” button. The light of added ingredients lights up. Press the “Start” button to start to the program. When the remaining cooking time is 10  minutes left, the current cooking process pauses, the appliance starts to release pressure – Fig. 14
3. You can also press “Add Ingredients” anytime during the pressure maintenance process. The current cooking process pauses, the appliance starts to release pressure.
4. When pressure is released completely, the appliance beeps. You can open the top lid to add more ingredients you want.
5. Close and lock the lid and press “Start” button. The appliance will continue to cook for the remaining cooking time.
6. You can also press “+,-” button to adjust the remaining cooking time from 5 minutes to 20 minutes according to different ingredients texture – Fig. 15

MULTI – COOK

Slow Cook Low, Slow Cook High, Saute/Sear, Sous Vide, Bake, Sauce Thickening, DIY are Multi- cook programs.

1.  Follow the steps in “Preparations before cooking”.
2. Press “Multi Cook” to choose cooking programs. The chosen programs lights up, the default cooking time is displayed on the screen – Fig. 16
3. Press “+/-” to change the cooking time – Fig. 17
4. Press “Pressure/Temp” to change the cooking temperature. The default cooking temperature is displayed on the screen – Fig. 18
5. Press “+/-” to change the cooking temperature – Fig. 19
6.  Press “Start” to start the cooking program. The appliance starts to heat up. The light of “Heating Up” lights up – Fig. 20
7. When you use “Slow Cook Low”, “Slow Cook High”, “Sauce Thickening” and “DIY”, the time previously set starts countdown from the beginning of program. When you use “Saute/Sear”, “Sous Vide”, “Bake” program, the appliance starts countdown when the temperature reaches the previously set parameter.
8.  When the cooking time has elapsed, the appliance beeps and switches to keep warm mode automatically except Saute/Sear, Sous Vide, Sauce Thickening and DIY. You can unlock and open the top lid.

Note :

1.  Some Programs’ cooking temperature can’t be changed. Please see the detail in the Multi-cook Programs chart.
2. Sous Vide Cooking program
   – The key for sous vide cooking is to create a vacuum seal. Vacuum sealing foods prevents evaporation and allows for the most efficient transfer energy from the water to the food. To do so, simply place your seasoned food in a plastic bag and squeeze out all the air and then seal the bag. Add water into the inner pot first and then submerge the food into the water.
   – If the cooking temperature is at or below 60°C, the cooking duration can be programmed from 10mins to 6 hours.
   – If the cooking temperature is above 60°C, the cooking duration can be programmed up to 20 hours.

DELAYED START

The delay start is not available only in Saute/sear, Sauce thickening, Sous vide. and DIY.

1. Follow the steps of pressure cook or multi-cook, choose the cooking program you need.
2.  Press “Time/ Delayed Start” once or twice until the light of delayed start lights up – Fig. 21
3. Press “+,-” to set time – Fig. 22
4. Press “Start” to confirm the preset time. When preset time is elapsed, the appliance starts working in the selected cooking mode automatically – Fig. 23

MY RECIPES

You can set any three Programs as “My Recipes”. The default programs are (1)Rice, (2)Soup, (3)Steam. We can press “My Recipes” to choose among the 3 recipes we want to use or change. If you want to change any of the default programs, for instance, to change “Steam” to “Beef/ Lamb”, follow the steps below:

1.  Press My Recipes to choose (3) Steam – Fig. 24
2. Press “Pressure Cook” to choose the “Beef/ Lamb” program – Fig. 25
3.  Set a cooking time or pressure or temperature if you need (please refer to the instruction above to change these cooking parameters) – Fig. 26
4. Press and hold the “My Recipe” button for 3 seconds to save it – Fig. 27

CLEANING AND MAINTENANCE

1.  It is recommended to clean your appliance after each use. Before cleaning let your appliance cool down for at least 2 hours.

2. You can wash the accessories including the steam cover, and the inner lid in the dishwasher. Do not put the appliance or cooking pot into the dishwasher:
   a Remove the condensation collector, place in the dishwasher – Fig. 28
   b Before placing the steam cover in the dishwasher you need to separate it in two parts – Fig. 29, Fig. 30
   c Remove the pressure limit valve to clean it, rinse it under water and dry – Fig. 31
   d To put the inner lid in the dishwasher you need to detach it from the appliance – Fig. 32
   e Remove the cooking pot from the appliance, rinse it and dry it off thoroughly. Do not use a scourer as this can damage the non stick coating in the pot – Fig. 33
   f Do not immerse the appliance in water or pour water into it, clean the housing with a damp – Fig. 34

3. Taking care of the pot a To ensure the maintenance of pot quality, it is recommended not to cut food in it.
   b Use the plastic spoon provided or a wooden spoon and not a metal type so as to avoid damaging the pot surface.
   c To avoid any risk of corrosion, do not pour vinegar into the pot.

4. Once all the components you just cleaned are perfectly dried, place them all in their original position.

5.  Always use the cooking pot provided.

6.  Make sure to clean the floater after each use. You may not be able to open the lid or it can be dangerous is the floater is very dirty and stuck. – Fig. 35

7. We need to press on the spring valve and remove the duct pressure limit valve cover to check they are functional and not dirty.

8. Do not pour water or food directly into the appliance. If you inadvertently immerse your appliance in water or spill water directly on the heating element (when the pot is not in place), take it to your service center for repair.

TECHNICAL TROUBLESHOOTING GUIDE

Wait for the pressure in the pot to be completely released automatically.
Pressure in the pot is fully
released but the float valve is stuck because it is too dirty,
and therefore unable to fall.| a.Once the product has cooled down, press the external part of the float
valve. -Fig 36
b.For next use, please clean b
and wipe the float valve. -Fig. 35
Unable to close lid| Hot pot with steam inside.| Wait for the pot to be cool.
The sealing gasket was not properly installed.| Install the sealing gasket properly.
The float valve is stuck because it is too dirty, and therefore unable to fall.| a.Once the product has cooled down, press the external part of the float valve.
b.For next use, please clean and wipe the float valve. -Fig. 35
The direction at which lid was closed is incorrect.| Close lid in the correct direction according to the instruction manual.
Food is uncooked.| Rice: water ratio is incorrect.| Use the required rice: water ratio.
No electricity from the power grid.| Check the electric circuit.
Steam leakage from lid| The sealing gasket is broken.| Send to repair and maintenance department.
Residue in the sealing gasket.| Clean and remove the residue.
The sealing gasket was not properly installed.| Install the sealing gasket properly.
Intense release of
pressure from pressure limit valve| Faulty pressure control resulted in the release of pressure.| Send to repair and maintenance department.
did the Pressure limit valve di not
fall into place.| Carefully rotate/press the pressure limit valve to make it fall into place.
Problem| Possible reasons| Solutions
---|---|---
Continuous pressure release from float valve| Residue in the float valve.| Clean and remove the residue.
Float valve is stuck.| Clean and remove the residue.
The limit valve releases pressure discontinuously during cooking progress.| Make the temperature in the pot more even.| Normal.
“E0” is displayed on a digital screen.| The top sensor is in a short circuit or open circuit.| Send to repair and maintenance department.
“El” is displayed on a digital screen.| The bottom sensor is in a short circuit or open circuit.| Send to repair and maintenance department.
“E2” is displayed on a digital screen.| The lid is not in the position defined for the selected cooking mode.| Please refer to the cooking table to check the right position of the lid for the program you have selected.
The lid switch sensor does not function.| Send to repair and maintenance department.
“Ell” is displayed on a digital screen.| IGBT WIC does not function.| Send to repair and maintenance department.
“ES” is displayed on a digital screen.| The temperature of IGBT is too high.| Check whether the air inlet and outlet is blocked by residues or dirt. If yes, clean and remove the residues or specks of dirt: If not, send to
repair and maintenance department.
“E10” is displayed on a digital screen.| No cookware| Put on the right cookware.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>