ACB Iluminaci n BLAAST WHITE ACB Fan Ceiling Light Instructions

: June 3, 2024
: ACB Iluminaci n

Table of Contents

ACB Iluminaci n BLAAST WHITE ACB Fan Ceiling Light Instructions
ACB Iluminaci n BLAAST WHITE ACB Fan Ceiling Light
WARNINGS
– TOOLS AND MATERIALS REQUIRED
Tools and materials required
HOW TO INSTALL THE FAN –
HOW TO INSTALL THE FAN
PRE-CODED REMOTE CONTROL
OPERATIONS WITH THE TRANSMITTER
ACB ILUMINACION. S.L. CIF: B96498233.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACB Iluminaci n BLAAST WHITE ACB Fan Ceiling Light Instructions

ACB Iluminaci n BLAAST WHITE ACB Fan Ceiling Light

Protection class I: The fitting has an earthing connection: The earth wire (yellow/green) has to be connected to the clip marked with .
The fitting should only be installed in rooms where direct contact with water is impossible.
Revolutions per minute.
Light source (yes / not included).
Remote control, included.
This device children can use it with age of 8 years or more and people with physical, sensory or mental small capacities, if they has been given them the supervision or adapted training. The children must not play with the fans. The cleanliness and the maintenance must be done by an adult.

WARNINGS

– Read entire booklet carefully before beginning installation and save these instructions.
– To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.
– To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location.
– For the electrical connection it is necessary to incorporate an isolator switch according to the installation regulations, which ensures all-pole cut, directly connected to the power terminals and it must have a contact separation in all its poles, which provides total disconnection under category III surge conditions.
– All wiring and connections must be made in accordance with national and local electrical codes. If you are not familiar with the way to do the electrical installation,\ you must use the services of a qualified electrician.
– Make sure that the fan is disconnected from the mains before removing the protection.
– To reduce the risk of personal injury, do not bend the blade attachment the system when installing, balancing or cleaning the fan. Never insert foreign objects between rotating fan blades.
– To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead wires.
– The fan blades cannot be installed lower than 2,3m from the floor.

The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be built into this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.

– TOOLS AND MATERIALS REQUIRED

Tools and materials required

Verify you have all parts before beginning the installation.
Check foam insert closely for missing parts. Remove fan from packing. To avoid damage to finish, assemble fan on soft padded surface or use the original foam inset in motor box. Do not lay fan on its side as this could damage it.