Shenzhen Hugsun Technology MINIPC-RK3588 Development Board Instruction Manual
- June 3, 2024
- Shenzhen Hugsun Technology
Table of Contents
Shenzhen Hugsun Technology MINIPC-RK3588 Development Board
Product introduction
Product overview
-
MINIPC-RK3588 is a high-performance product independently developed by Hugsun, using Rockchip eight-core 64-bit high-performance processor: RK3588
RK3588 is Rockchip’s new generation flagship AloT chip, using 8nmLP process; equipped with eight-core 64-bit CPU, main frequency up to 2.4GHz; integrated ARM -
Mali-G610 MP4 quad-core GPU, built-in AI accelerator NPU, can provide 6Tops computing power, support mainstream The powerful deep learning framework, the powerful RK3588 can bring more optimized performance to various AI application scenarios
-
Support 8K@6Ofps H.265/VP9 video decoding and 8K@30fps, H.265/H.264 video encoding ;Powerful video, encoding and decoding capabilities can make the picture 8K high-definition presentation, the picture quality is more delicate
-
With HDMI 2.1/HDMI 2.0/DP1.4 multi-channel video output and HDMI IN2.0 video input interface, support multi-channel 8K video output and 4K video input
Onboard Gigabit Ethernet RJ45, 2.4GHz allowing network communication to have a higher rate
Second, product description
Product Specifications
◆ CPU
| Rockchip RK3588
---|---
Octa-core 64-bit (4xCortex-A76+4xCortex-A55), 8nm advanced
technology, main frequency up to 2.4GHz
◆ GPU
| ARM Mali-G610 MP4 quad-core GPU
Support OpenGL ES3.2 / OpenCL 2.2 /Vulkan1.1, 450 GFLOPS
| Built-in neural network processor NPU, strong AI computing
performance
◆ NPU
| NPU computing power up to 6 TOPS
Support INT4/INT8/INT16 mixed operation
| It can realize network model conversion based on series
frameworks such as TensorFlow / MXNet / PyTorch / Caffe
◆ FLASH| 16GB/32GB/64GB/128GB eMMC
◆ DDR| 4GB/8GB/16GB 64bit LPDDR4x
◆ Codec
| Video decoding:
8K@6Ofps H.265/VP9/AVS2
8K@30fps H.264 AVC/MVC
4K@60fps AV1
1080P@6Ofps MPEG-2/-1/VC-1/VP8
---|---
Video encoding:
8K@30fps encoding, support H.265 / H.264
*Up to 32 channels of 1080P@30fps decoding and 1 6ch 1080P@30fps encoding
◆ clock| Support RTC power off to save time
◆ show output| HDMI2.1 interface x1, supports up to 8K@60HZ or
4K@120HZ
HDMI2.0 interface x1, 4K@60HZ
DP1.4 interface x1, 8K@30fps, multiplexed with USB 3.0
◆ show input| HDMI2.0-IN port x1 (4K@60fps)
◆ network| Ethernet: 10/100/1000M standard RJ-45 interface x1
2.4GHz
◆ USB
| USB 2.0 TYPE-A interface x2
USB 3.0 TYPE-A interface x1
USB 3.0 TYPE-C interface x1
◆ Extension| 2.5 inch SATA hard disk interface x1
ports|
---|---
◆ powersupply| DC input voltage 12V 3A
◆ Operating
temperature
| ****
-10℃ ~ 60℃
◆ System
Support
| ****
Android、Linux ubuntu 、Linux debian
Product interface
Power Connector
You can insert the DC plug (5.5×2.1MM) of the power supply into the power port of the MINI PC, so that the MINI PC will start up
HDMI OUT Port1
You can connect to monitor by inserting a HDM Cable plug(Type A) into the HDMI Port on your MINI PC.(Note that the output resolution of HDMI1 interface supports up to 4K@60HZ, and there is no sound, the sound is output by HDMI2)
HDMI OUT Port2
You can connect a monitor by plugging the HDMI cable plug (type A) into the HDMI2 port on the MINI PC. (Note that the HDMI2 interface output resolution supports up to 8K@60HZ or 4K@120HZ)
HDMI IN Port
You can connect other devices by inserting the HDMI cable plug (type A) into the HDMI IN port on the MINI PC, so that the pictures of other devices can be displayed on the MINI PC
Ethernet Port
You can connect to the network by plugging an RJ45 type network cable into the
Ethernet port on the MINI PC
Power button
- You can control the startup/standby or shutdown of the MINI PC through this power button.
- In the power-on state, short press the power button, the MINI PC will enter the standby state
- In standby mode, short press the power button, the MINI PC will wake up again
- In the power-on state, press and hold the power button for about 3 seconds, the display screen will pop up the choice of shutdown or restart
upgrade button
You can use sharp objects, such as needles, to withstand the buttons inside, connect the TYPE-C data cable to the MINIPC and the computer, and then connect to the power supply to upgrade the software of the MINI PC
USB Type-C Port
You can connect other devices, such as HUB with Type-C interface, or connect to a computer by plugging the Type-C data cable into the Type-C port on the MINI PC
USB Type-A Port1(USB2.0)
You can plug in a USB flash drive/keyboard or mouse or any other USB type device on this port
USB Type-A Port2(USB2.0)
You can plug in a USB flash drive/keyboard or mouse or any other USB type device on this port
USB Type-A Port2(USB3.0)
You can plug in a USB flash drive/keyboard or mouse or any other USB type device on this port
RESET button
When the device encounters a failure, such as a crash or a program stuck and no response, you can use this button to restart the MINI PC. The method of use is to use a sharp object, such as a needle, to withstand the inside of the MINI PC. button, the MINI PC will restart
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>