VITEA CARE KXSS Two Wheeled Walker Instruction Manual

: June 3, 2024
: VITEA CARE

Table of Contents

KXSS Two Wheeled Walker
Introduction
Description of product
Contraindications
Safety of use
Everyday use and maintenance
Technical parameters
Symbols
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KXSS Two Wheeled Walker
Instruction Manual
INSTRUCTIONS FOR USE
WHEELER
WHEELED WALKER
VCBP0032
model: KXSS, KXY
Edition EJ 06.2022 ****

KXSS Two Wheeled Walker

PLEASE READ CAREFULLY BEFORE USING WHOLE OF INSTRUCTIONS

Introduction

Thank you for choosing our product. We are deeply convinced that it will meet your expectations. Please read this document before first use. This manual is passed in order to provide the necessary information for the safe use of the device. The correct application of the recommendations will contribute significantly to extend the durability and aesthetics of the product. We want to emphasise that constantly we are trying to improve the quality of our products, which may result in minor changes that are not included in the manual.

Description of product

Handle
The aluminum support frame
The reinforcing frame
The telescopic height adjustment
Submission button of a walker
The reinforcing frame
Legs finished rubber non-slip security
Legs finished wheels

Use

Walking aid designed for disabled people for those with locomotor disorders.
Ideal for rehabilitation process and physiotherapy (verticalisation, lower limb relief).

Contraindications

Contraindications to the upright position, injuries and dysfunctions of upper limbs preventing the patient from supporting themselves.

Usage

The product is packed In folder position.
After unpacking the package, check if it contains all parts in accordance with the list of elements set out above.
Ensure that all components have no visible damage. If any doubts, please contact the manufacturer.
In order to unfold the walker, should leaning its sides maximally outside till the moment of latching blockades. (Illustration 3.)
For easy storage and transport, the walker can be folded.
To do that, should push the submission button placed on the frame and fold side frames.
Release submission button. Walker should be folded to position shown on the Illustration 2
Walker can be moved, holding by side frames.

Safety of use

WARNING!

a) Before using the walker, refer to this manual and keep it for future reference.
b) Use of the product on the icy, wet, greasy, strongly gritty surfaces is unacceptable – it creates a risk of falling.
c) The walker should be used on even surfaces at an incline less than 5%.
d) Before each use of this product:
– Perform visual inspection of all structural components of the product,
– Carefully check the stability and condition of the support frame.
e) Do not use the walker in the event of any visible or perceptible damage (e.g. cracks in the frame). It may cause an accident.
f) The walker is designed for users with a maximum weight of 110 kg.
g) The walker is design to support one person, climbing and standing on the walker is strictly forbidden.
h) Do not leave the walker close to open sources of fire.
i) Be aware that the surface temperature of the upholstery and the frame parts may be increased after exposure to the sun or other heat source. Furthermore, with low temperatures there is a danger of overcooling metal parts of walker. It may cause burns or frostbite parts of the body.
j) It is inacceptable to use the walker after discovering any visible or detectable damages (e.g. broken frame) as it may lead to accident.
k) All the repairs needs to be performed by a skilled personnel.
l) Do not exceed the maximum height.
j) It is inacceptable to use the walker after discovering any visible or detectable damages (e.g. broken frame) as it may lead to accident.
k) All the repairs needs to be performed by a skilled personnel.
l) Do not exceed the maximum height.
m) Keep walker with both hands simultaneously, in the direction of movement.
n) Make sure that the lock used to folding and unfolding the walker is working properly.
o) Manufacturer does not recommend making any walker modifications on their own, especially by assembling additional wheels because product is not equipped with brakes. It might cause a fall or serious injuries. The manufacturer will not take responsibility for such actions.
p) There is a risk of jamming fingers in the area for receipt of a walking frame.

Everyday use and maintenance

HEIGHT ADJUSTMENT

Before using a walker, should adjusted to the user’s height by telescopically adjustable feet length.
To do this, press the height adjustment pin of the legs and depending on the needs reducing the height of the legs or extend the leg (Illustration 4.)

Illustration 4.

It is important to the length of all legs was the same (handles must be parallel to the ground).
The handle should be at the height that will provide comfort and a sense of security for the user.

MOVING WITH WALKER WITH WHEELS

In the process of using a walker, the person must move walker forward and take a step forward, walk into the frame.

CARE AND MAINTENANCE

Clean the walker frame with a damp cloth
Remove contaminants on a regular basis
In order to maintain the walker’s parameters, it is very important to keep all elements clean and stored properly.
Storing the walker in damp places (baths, laundry rooms, etc.) or outdoors, combined with lack of hygiene will quickly degrade the performance and aesthetic.
Do not expose the walker on to extreme weather conditions (rain, snow very strong sun), because certain parts can change colour.

You must not use:

solvents,
toilet detergents,
sharp brushes and hard objects,
detergents that contain chlorine,
corrosive detergents,
Do not clean the walker with pressure or steam aggregates!

TECHNICAL REVIEW

The review should be carried out regularly, it should be preceded by thorough cleaning the rollator (so as to reveal any hidden damage).

Frequency	Object of control	Comments
Before first installation	Checking the technical condition and all the
elements within the packaging.	Check if any elements have any visible

mechanical damage.
Every two weeks| Screw, nut and rivets control regarding their correct fixing.| Make sure if all the screws, top and rivets are fixed tightly.
Every two months| Cleanliness and general condition.| In case of mechanical damage contact the producer immediately.

Repair

In case of reparation, please contact the producer.

Customer service

If you have any questions or need help, contact the producer.

Technical parameters

Permitted user weight	110 kg
Usage period	5 years since production date
Walker hight	78-96 cm
Walker wildth	66 cm
Walker weight	3 kg
The scope of control levels	8
Maximum safe slope
Description of the environment in which the product will be used
temperature of storage and use and use	Od +5ºC do +40ºC
The humidity for the storage	Od 30% do 70%
Frame material	aluminium,
printed on the product

Symbols

**** Confirmation of compliance with EU standards	****Protect from humidity
Manufacturer	Protect from sunlight
****Date of production	Permitted user weight
**** Read the user’s manual	Use inside and outside buildings
Warning	The product is intended to transport by car
****Catalog number	The product is intended to the transport by plane
Serial number	The possibility of fingers jamming.