Rebel KOM1007 COMP Wireless Vertical Mouse User Manual
- June 3, 2024
- Rebel
Table of Contents
Rebel KOM1007 COMP Wireless Vertical Mouse
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before first use, and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.
- Protect this device from extreme temperatures, sources of heat and direct sunlight. Do not expose the device to water or humidity nor install near strong magnetic field. Do not handle this device with wet hands.
- Disconnect from power outlet if the device is not going to be used for a long time.
- Do not use this device if it has been damaged.
- Place the device on flat, stable surface.
- Prevent the device from falling on the ground or being strongly impacted.
- Producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.
- Producer does not guarantee compatibility with every external device.
- This product is not a toy; keep it beyond children’s reach.
- Do not disassemble nor repair this device yourself. The device has no user serviceable parts inside. In case of damage, contact authorized service point for check-up or repair.
- Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
- Do not point laser beam directly into eyes.
OPERATION
- The USB plug of the mouse should be connected to a free, compatible USB port of the computer.
- The operating system will automatically detect the mouse and install the appropriate drivers.
- On the bottom of the mouse, slide the power switch down.
- The mouse is ready for use.
- To change DPI, press and hold left button and scroll wheel for about 5 seconds.
- To turn off the mouse, move the switch on the bottom of the mouse up.
- To charge the device, connect the included cable to the mouse and the charger. While charging, the blue LED inside the device will glow. After charging, the LED will turn off.
CLEANING
Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device
SPECIFICATION
Technical parameters
- Precision: 800/1200/1600 dpi
- Sensor: laser
- Sensor model: 3065
- Polling rate: 125 Hz
- Buttons: 5
- Scroll wheel: scroll + button
- DPI switch: 3 modes
- Stroke life: up to 2 million times
- Skid pads: plastic
- Material: ABS
- Working time: up to 30 days
Communication
- Connection type: wireless
- Frequency: 2,4 GHz
- Transmit power: 5 dB
- Interface: USB 2.0
- Charging port: DC096
- Supported OS: Windows 2000 / Windows XP / Windows CE / Windows 7 / Windows 10 / Linux / Android
| DE | EN | PL | RO |
|---|---|---|---|
| Taste Links | Left button | Lewy przycisk | Buton stânga |
| Scrollrad | Scroll wheel | Pokrętło | Rotiță derulare |
| Taste Rechts | Right button | Prawy przycisk | Buton dreapta |
| Ladebuchse | Charging port | Port ładowania | Port de încărcare |
| Taste Vorwärts | Forward button | Przycisk naprzód | Buton înainte |
| Taste Rückwärts | Backward button | Przycisk wstecz | Buton înapoi |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>