eufyCare Baby Monitor 2 User Guide
- June 3, 2024
- Eufy
Table of Contents
QUICK
START GUIDE
eufyCare Baby Monitor 2
SAFETY INSTRUCTIONS
- Strangulation Hazard: Children get STRANGLED in cords. Keep cords out of the reach of children (more than 1m / 3ft away). Never use extension cords with AC adapters. Only use the AC adapters provided.
POWERING ON CAMERA
SETTING UP CAMERA
Download and install the eufyCare app, and sign up for an account. Scan the QR Code on the bottom of the camera using your eufyCare app, and follow on-screen instructions to complete the setup.
| Status LED | Description |
|---|---|
| Solid white | Connected. |
| Flashing white | Waiting to pair. |
| Flashing white fast | No connection. |
MOUNTING CAMERA
You have three options to mount the camera: on the wall, in the corner, or on the crib.
Anker Innovations Limited. All rights reserved. eufy and the eufy Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. (4) Consult the dealer or an experienced
radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance
is 20cm. Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
**** This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.
For the declaration of conformity, visit the Web
site:https://uk.eufylife.com/.
This product can be used across EU member states.
The adapter shall be installed near the equipment and shall be easily
accessible. Do not use the Device in the environment at too high or too low
temperature, never expose the Device under strong sunshine or too wet
environment. The suitable temperature for the product and accessories is 0°C
to 40°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C~25°C.
Please ensure to use only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the authorization of the
projector and the guarantee article.
The charger is for indoor use only. The plug is considered as disconnected
device of adapter.
The charger for T8360 type is TEKA-UCA20EU, output voltage/current is 5Vdc/2A.
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
Wi-Fi Operating Frequency Range: 2412~2472 MHz(2.4G); Wi-Fi Max Output Power:
17.66 dBm(ERIP);
Bluetooth Operating Frequency Range: 2402~2480 MHz; Bluetooth Max Output
Power: 5.43 dBm(EIRP).
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
**** This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
This product complies with the radio interference requirements of the United
Kingdom
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Radio Equipment Regulations 2017. The full text of the UK declaration of
conformity is available at the following internet address:
https://uk.eufylife.com
The charger is for indoor use only. The plug is considered as disconnected
device of the adapter.
The charger for T8360 type is TEKA-UCA20BS, output voltage/current is 5Vdc/2A.
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
Customer Service
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
References
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
- eufy - Built with Care | Home Security System & Robovacs | eufy UK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>