AIRBOGGAN Inflatable Toboggan Sled User Guide
- June 3, 2024
- AIRBOGGAN
Table of Contents
Inflatable Toboggan Sled
User Guide
INFLATING/ DEFLATING AIRBOGGAN
TO INFLATE:
-
Remove valve cap by twisting counter-clockwise and pulling out.
-
Fully extend the valve stem by pressing it inward and twisting counter-clockwise.
-
Use any high pressure pump with a Halkey-Roberts valve adapter to inflate to desired firmness. Insert the pump hose adapter into the valve and twist clockwise ¼ turn to secure. The valve will automatically open when the hose is inserted correctly. Do not exceed 1 Opsi.
-
Detach pump and replace valve cap by inserting into valve and twisting clockwise.
TO DEFLATE:
-
Remove valve cap by twisting counter-clockwise and pulling out.
-
Lock valve in open position by depressing valve stem and twisting clockwise.
-
Force out air by folding and using body weight.
-
Close valve by depressing valve stem and twisting counter-clockwise to fully extend it.
-
If your pump has a deflate function, insert the pump hose adapter into the valve and twist clockwise¼ turn to secure. Operate pump until all remaining air has been removed and then detach pump hose adapter from valve.
-
Replace valve cap by inserting into valve and twisting clockwise.
PRODUCT CARE Ei MAINTENANCE
Inflatables like AirBoggan are susceptible to damage from excessive sun, heat,
dirt, mold, mildew, or abrasion. Following the care, maintenance, and repair
recommendations below will allow you to enjoy your AirBoggan for many years to
come.
CLEANING:
It’s a good idea to give AirBoggan a thorough fresh water rinse after each use
to remove any dirt or debris. For heavier soiling wash with soap and water or
use an inflatable boat cleaner. Be sure to thoroughly rinse off any soaps or
cleaners with fresh water.
UV PROTECTION:
AirBoggan materials are UV resistant, but long term exposure to the UV rays
from the sun can still cause material degradation over time. Treatment with
303 Aerospace Protectant once each year can go a long way to prevent damage.
When AirBoggan is not in use, place it in the shade or store it per the
directions below.
STORAGE:
AirBoggan can be rolled up to a compact cylindrical shape after deflating. Dry
thoroughly before storage and store in a cool dry place, especially when
storing for an extended period of time. If AirBoggan is stored damp, mold or
mildew can grow and damage the materials. Do not expose AirBoggan to excessive
heat for extended periods.
HANDLING:
AirBoggan is made from rugged PVC coated fabric that is abrasion and puncture
resistant, but excessive wear or sharp objects can damage the material and
result in leaks. Avoid dragging AirBoggan on rough surfaces like pavement, and
keep it away from sharp objects.
PRODUCT REPAIR WITH INCLUDED PATCHES
AirBoggan may very gradually lose air when left inflated for extended periods.
This is normal and not a cause for concern. If you suspect a leak, spray
AirBoggan with a soap and water solution and look for any bubbles indicating
the location of a leak. Leaks can be easily patched using the included patches
according to the directions below:
Step 1 – Deflate AirBoggan.
Step 2 – Clean and completely dry the area surrounding the leak.
Step 3 – Apply a thin layer of glue to an area slightly larger than the
size of the patch as well as to the patch itself. Due to shipping
restrictions, glue is not included with your repair kit. Email
info@lakesurf.com to get a tube of glue shipped to
you free of charge.
Step 4 – Let dry for 20 minutes and apply a second coat of glue to
AirBoggan and the patch.
Step 5 – Let dry for another 20 minutes.
Step 6 – Apply a third, and final, coat of adhesive to AirBoggan and the
patch and allow to dry for 3-5 minutes (preferably 3 minutes). If beyond this
time, reactivate by applying an additional coat of adhesive. Bond when tacky.
Step 7 – Carefully align the patch and press both surfaces together.
Step 8 – Apply pressure to the entire glued surface using a roller if
available. Roll every millimeter of patch in multiple directions, working from
the inside to the outside of the patch.
Step9- Allow to cure for a full 24 hours before rolling up or inflating.
Sometimes air can leak from the valve when debris becomes lodged on the
valve’s sealing surfaces. A few quick bursts of air from depressing the valve
stem will typically remove any blockages. If an air leak persists, reach out
to Lakesurf customer care for assistance by emailing
info@lakesurf.com.
PRODUCT WARRANTY
AirBoggan is fully guaranteed to the original owner against defects in
materials and workmanship for a period of one year from the date of purchase.
Lakesurf is not responsi ble for the effects of normal wear and tear,
accidents, abuse, alteration, modification, misuse or improper care, including
sun damage, mold, or mildew.
To make a warranty claim email info@lakesurf.com
and include 1) Description of the defect, 2) Photograph clearly showing the
nature of the defect, and 3) Order number and name of purchaser. If the
warranty claim is approved, Lakesurf will, at its sole discretion, repair or
replace the defective item free of charge.
CONTACT INFORMATION
Lakesurf, LLC
29980 Technology Drive, Ste 9
Murrieta, CA 92563
www.lakesurf.com
info@lakesurf.com
Lakesurf
@ elakesurf
https://www.lakesurf.com/products/airboggan
Scan for additional product information.
WARNING
It is the owner’s responsibility to read the instruction manual and
instruct all users in the safe operation of this product. User ASSUMES ALL
RISKS related to the use, or misuse, of this product. Please read this manual
prior to inflating and using the product and keep for future reference. As
with any snow play equipment, recklessness, inexperience, misuse, or neglect
of the equipment may result in SERIOUS INJURY or DEATH.
- Children should only use this product under strict adult supervision.
- Never place wrists or feet through handles.
- Maintain a safe distance from obstacles and hazards that could result in injury to the user or damage to the product.
- Ensure the path is clear of people before proceeding downhill.
- Sledders should wear a helmet.
- Always sit on AirBoggan with feet facing forward and secure grip on handles.
- When towing behind snowmobile or other vehicle, speed should not exceed 10mph.
- Do not use while under the influence of alcohol or drugs.
- Take all reasonable precautions in the use and operation of your product.
- Know your own limits and act responsibly.
- Do not use where the potential exists for dangerous conditions.
- Periodically check all equipment to ensure safety. Replace any portion of the equipment that shows signs of wear.
- Do not add any hardware or attachments not otherwise supplied by the manufacturer.
THE WARNINGS AND PRACTICES SET FORTH ABOVE REPRESENT SOME COMMON RISKS ENCOUNTERED BY USERS AND DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER. PLEASE USE COMMON SENSE AND GOOD JUDGMENT.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>