BOSCH PVW8 HB Induction Hob Instructions

: June 25, 2024
: Bosch

BOSCH PVW8 HB Induction Hob

Product Information

The Induction hob PVW8..HB.. is a high-quality cooking appliance designed to provide efficient and safe cooking experience. With advanced induction technology, this hob offers precise control over cooking temperatures and ensures even heat distribution.

Product Usage Instructions

Safety Precautions

It is crucial to observe the following safety instructions to prevent accidents and ensure safe operation of the appliance:

Never leave hot oil or fat unattended on the hob to avoid the risk of fire.
Avoid touching heating elements during use, especially the hob surround.
Keep young children away from the appliance to prevent accidents.
Do not place metal objects on the hob as they can quickly become very hot.
Avoid improper repairs and only use genuine spare parts when necessary.

Avoiding Material Damage

To prevent material damage and ensure the longevity of the appliance, follow these guidelines:

Avoid letting electrical appliance cables come into contact with hot parts of the appliance.
Keep hotplates and saucepan bases dry to prevent accidents.
Use heat-resistant cookware when cooking in a bain marie to prevent shattering.
Do not use the appliance if it has a cracked or broken surface to avoid injuries.

FAQs

Q: How can I clean the induction hob?
- A: Allow the appliance to cool down before cleaning. Use a damp cloth with mild detergent to wipe the hob surface. Avoid using abrasive cleaners that may damage the induction surface.
Q: Can I use any type of cookware on the induction hob?
- A: Only use cookware that is compatible with induction cooking. Ensure your pots and pans have a flat bottom and are made of ferrous materials for optimal performance.

Safety

Observe the following safety instructions.
1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instructions, the appliance and
the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit.
1.2Intended use Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location. Only use this appliance: ¡ To prepare meals and drinks. ¡ Under supervision. Never leave the appli-
ance unattended when cooking for short periods. ¡ in private households and in enclosed spaces in a domestic environment. ¡ up to an altitude of max. 4000 m above sea level. Do not use the appliance: ¡ With an external timer or a separate remote control. This does not apply if operation with appliances included in EN 50615 is switched off. If you wear an active implantable medical device (e.g. a pacemaker or defibrillator), check with your doctor that it complies with Council Directive 90/385/EEC of 20th June 1990, EN 45502-2-1 and EN 45502-2-2, and that it has been chosen, implanted and programmed in accordance with VDE-AR-E 2750-10. If these conditions are satisfied, and

1 Available depending on software version. Further information on availability can be found on the website. 2

if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable. 1.4Safe use
WARNING Risk of fire! Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires. Never leave hot oil or fat unattended. Never attempt to extinguish a fire using wa-
ter; instead, switch off the appliance and then cover with a lid or a fire blanket. The cooking surface becomes very hot. Never place flammable objects on the cooking surface or in its immediate vicinity. Never place objects on the cooking surface. The appliance will become hot. Do not keep combustible objects or aerosol cans in drawers directly underneath the hob. Hob covers can cause accidents, for example due to overheating, catching fire or materials shattering. Do not use hob covers. After every use, switch off the hob using the main switch. Do not wait until the hob turns off automatically as there are no longer any pots and pans on it. Food may catch fire. The cooking process must be monitored. A short process must be monitored continuously.

Safetyen
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted. Caution should be exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Hob protective grilles may cause accidents. Never use hob protective grilles. The appliance becomes hot during operation. Allow the appliance to cool down before
cleaning. Metal objects on the hob quickly become very hot. Never place metal objects (such as knives,
forks, spoons and lids) on the hob. WARNING Risk of electric shock!
Improper repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when repair-
ing the appliance. If the power cord or the appliance power
cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service. If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. If the surface is cracked, you must switch off the appliance in order to prevent a possible electrical shock. To do this, switch off the appliance via the fuse in the fuse box rather than at the main switch. Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. If the appliance or the power cable is damaged, immediately switch off the fuse in the fuse box. Call customer services. Page 20 An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to clean the appliance.

3

Avoiding material damage

The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance. Never bring electrical appliance cables into
contact with hot parts of the appliance. If metallic objects come into contact with the fan that is located on the underside of the hob, this may cause an electric shock. Do not store long, pointed metallic objects
in the drawers below the hob. WARNING Risk of injury!
Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate. Always keep hotplates and saucepan
bases dry. Never use icy-cold cookware that has been
in the freezer.

When cooking in a bain marie, the hob and cooking container could shatter due to overheating. The cooking container in the bain marie
must not directly touch the bottom of the water-filled pot. Only use heat- resistant cookware. An appliance with a cracked or broken surface can cause cuts. Do not use the appliance if it has a cracked or broken surface.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.

2 Avoiding material damage Avoidingmaterialdamage

This is where you can find the most common causes of damage and tips on how to avoid them.

Damage Stains Stains, blisters
Stains, blisters or fractures in the glass
Stains, discolouration

Cause Unsupervised cooking process. Spilled food, especially food with a high sugar content. Defective cookware, cookware with melted enamel or cookware with copper or aluminium base. Unsuitable cleaning methods.

Blisters or fractures in Knocks or falling cookware, cooking ac-

the glass

cessories or other hard or pointed objects.

Scratches, discolour- Rough cookware bases or moving the cook-

ation

ware on the hob.

Scratches

Salt, sugar or sand.

Damage to the appli- Cooking with frozen cookware. ance

Damage to the cook- Cooking without contents. ware or the appliance

Glass damage

Melted material on the hot cooking zone or hot pot lid on the glass.

Overheating

Hot cookware on the control panel or on the frame.

Measure Monitor the cooking process. Remove immediately with a glass scraper.
Use suitable cookware that is in a good condition.
Only use cleaning agents that are suitable for glass ceramic, and only clean the hob when it is cold. When cooking, do not hit the glass or let objects fall onto the hob. Check the cookware. Lift the cookware when moving it. Do not use the hob as a work surface or storage space. Never use frozen cookware.
Never place or heat empty cookware on a hot cooking zone. Do not place greaseproof paper or aluminium foil nor plastic containers or pot lids on the hob. Never place hot cookware on these areas.

4

Environmental protection and saving energy

ATTENTION! A fan is located on the underside of this hob. If a drawer is located on the underside of the hob,
do not store any small or pointed objects, paper or tea towels in it. These objects may be sucked in and damage the fan or impair the cooling. There must be a clearance of at least 2 cm between the contents of the drawer and the fan entry point.

3 Environmental protection and saving energy Environmentalprotectionandsavingenergy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less energy. Select the cooking zone to match the size of your pan. Centre the cookware on the hob. Use cookware whose base diameter is the same diameter as the hotplate. Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter. ¡ Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy. Cover saucepans with suitable lids. ¡ Cooking without a lid consumes considerably more
energy.

Lift lids as infrequently as possible. ¡ When you lift the lid, a lot of energy escapes.
Use a glass lid. ¡ You can see into the pan through a glass lid
without having to lift it. Use pots and pans with flat bases. ¡ Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food. ¡ Large items of cookware containing little food need
more energy to heat up. Cook with only a little water. ¡ The more water that is contained in the cookware,
the more energy is required to heat it up. Turn down to a lower power level early on. ¡ If you use an ongoing power level that is too high,
you will waste energy. Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance.

Suitable cookware

Suitablecookware

Cookware that is suitable for induction cooking must have a ferromagnetic base, i.e. it must be attracted by a magnet. The base must also match the size of the cooking zone. If cookware is not detected on a cooking zone, place this on the cooking zone with the next smallest diameter.

4.1Size and characteristics of the cookware
To be able correctly detect the cookware, you must take the size and the material of the cookware into consideration. All cookware bases must be perfectly flat and smooth. Use Cookware test to check whether the cookware is suitable. Refer to “Cookware test”, Page 14 for more details.

Cookware Recommended cookware
Suitable

Materials Stainless steel cookware in a sandwich design that distributes the heat well.
Ferromagnetic cookware made of enamelled steel, cast iron or special induction cookware made of stainless steel. The base is not fully ferromagnetic.

Properties This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected easily. This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected.
If the ferromagnetic area is smaller than the base of the cookware, only the area that is ferromagnetic heats up. As a result, the heat is not distributed evenly.

5

enSuitable cookware Cookware bases that contain aluminium.

Not suitable

Cookware made from normal thin steel, glass, clay, copper or aluminium.

Notes ¡ Do not use adapter plates between the hob and the
cookware. ¡ Do not heat up empty cookware and do not use
cookware with a thin base, as this may become very hot.

These cookware bases reduce the ferromagnetic area, which means that less power is emitted to the cookware. This cookware may not be sufficiently detected or may not be detected at all, and therefore does not heat sufficiently.

6

Familiarising yourself with your appliance

5 Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance
5.1Control panel
Individual details, such as colour and shape, may differ from the figure.
CCC

A

Letters

Designation Main switch Control panel Cooking zone

Note: Always keep the control panel clean and dry. Tip: Do not place any cookware near the displays or buttons. The electronics may overheat.

Touch fields When you switch on the hob, the symbols for the controls available at this time light up.

Sensor

Function Main switch Select a cooking zone Settings area PowerBoost Automatic linking/separating of cooking zones Timer functions Childproof lock Pause Favourite button Connectivity

B
Indicators/symbols

Display –

Function Switch-off timer Power levels Childproof lock

Buttons in connection with Home Connect As soon as the connection to Home Connect has been established, the following buttons and displays are available:

Sensor

Function Accept settings from another appliance

If lights up, search for further information in the Home Connect app.

7

enBefore using for the first time

5.2Distribution of the cooking zones
The specified power has been measured with the standard pots which are described in IEC/EN 60335-2-6. The power may vary depending on the size of the cookware or cookware material.

B

C

D

A
Area 18 cm diameter
Ø 14.5 cm
24 cm diameter

D
Highest setting Power level 9 PowerBoost Power level 9 PowerBoost Power level 9 PowerBoost

2000 W 3100 W 1600 W 2200 W 2500 W 3700 W

Area 21 cm diameter
21 x 38 cm

Highest setting Power level 9 PowerBoost Power level 9

2500 W 3700 W 3600 W

At power level 9, the hob reaches the power indicated in the table in order to reduce the preheating times and keeps them running for a certain time, provided the other cooking zone on the same side is not in use.

5.3Cooking zone

Before you start cooking, check whether the size of the cookware fits the cooking zone that you want to use for cooking:

Area /

Cooking zone type Single-circuit cooking zone Combi cooking zone Page 10

5.4Residual heat indicator

The hob has a residual heat indicator for each cooking zone. Do not touch the cooking zone if the residual heat indicator is lit.

Display

Meaning The cooking zone is hot. The cooking zone is warm.

Before using for the first time

Beforeusingforthefirsttime

Observe the following recommendations.
6.1Initial cleaning
Remove any leftover packaging from the hob surface and wipe the surface with a damp cloth. You can find a list of recommended detergents on the official website www.bosch-home.com. More information on care and cleaning. Page 18
6.2Cooking with induction
In comparison to conventional hobs, induction technology brings with it a series of changes and has a number of benefits such as time savings when cooking and frying, energy savings as well as greater ease of cleaning and care. It also offers improved heat control as the heat is generated directly in the cookware.

6.3Cookware
You can find a list of recommended cookware on the official website www.bosch- home.com. Further information on suitable cookware. Page 5
6.4Setting Home Connect
When you first switch on the appliance, you will be prompted to set your home network. lights up for a few seconds on the display panel. To begin the connection to Home Connect, touch and proceed in accordance with the information in the section . To end the setting, switch off the hob. You can also adjust the Home Connect setting at a different time.

7 Software update Softwareupdate
If the appliance is connected to Home Connect, some functions may be available with a software update.

More information on the availability of additional functions can be found on the website www.boschhome.com

8

Basic operation

8 Basic operation Basicoperation
8.1Switching on the hob
Touch . A signal sounds. The symbols for the cooking zones and the currently available functions light up. lights up in the cooking zone displays.
a The hob is ready to use. ReStart If you switch the appliance on within four seconds of
switching it off, the hob operates with the settings that were previously set.
8.2Switching the hob off
Touch until the displays go out. a All cooking zones are switched off. Note: If all of the cooking zones are switched off for longer than 59 seconds, the hob is automatically switched off.
8.3Setting the power level in the cooking zones
The cooking zone has 17 power levels, which are displayed from to with intermediate values. Select the best power level for the food and the planned cooking process.

1. Touch the required cooking zone display a and light up. 2. Select the required power level in the settings area. a The power level has been set. Note: If no cookware is placed on the cooking zone or the pot is not suitable, the selected power level flashes. After a certain period of time, the cooking zone switches itself off.
QuickStart If you set one or more items of cookware on any
cooking zone before switching on the appliance, the hob detects this and automatically selects the cooking zone for one of the items of cookware. Then select the power level in the next 59 seconds, or the hob will switch off.
Changing the power level and switching off the cooking zone 1. Select the cooking zone. 2. Select the required power level or set it to a The cooking zone’s power level is changed or the
cooking zone is switched off.

8.4Cooking tips

¡ When heating up puree, cream soups or thick sauces, stir occasionally.
¡ To preheat, set the power level 8-9. ¡ When cooking with the lid on, reduce the power
level as soon as you see steam escaping. The cooking result is not affected by the steam escaping. ¡ After cooking, place a lid on the cookware until you serve the dish. ¡ To cook with the pressure cooker, observe the manufacturer’s instructions. ¡ Do not cook food for too long, otherwise nutrients will be lost. The kitchen timer enables you to set the optimal cooking time. ¡ Ensure that the oil does not smoke. ¡ To brown the food, fry it in small portions, one after the other. ¡ Some items of cookware may reach high temperatures while the food is cooking. You should therefore use oven gloves. ¡ You can find recommendations for energy-efficient cooking under “Saving energy”, Page 5

Cooking recommendations

The table shows which power level ( ) is suitable for

which food. The cooking time (

) may vary de-

pending on the type, weight, thickness and quality of

the food.

Melting Chocolate, cooking chocolate Butter, honey, gelatine Heating and keeping warm Stew, e.g. lentil stew Milk1 Boiled sausages1 Defrosting and heating Spinach, frozen Goulash, frozen Poaching, simmering Potato dumplings 1 Fish 1 White sauces, e.g. Béchamel sauce Whisked sauces, e.g. Béarnaise sauce, Hollandaise sauce Boiling, steaming, braising Rice, with double the volume of water Rice pudding 2 1 Without lid 2 Preheat to power level 8 – 8.5

1 – 1.5 1 – 2
1.5 – 2 1.5 – 2.5 3 – 4
3 – 4 3 – 4
4.5 – 5.5 4 – 5 1 – 2 3 – 4
2.5 – 3.5 2 – 3

–
–
15 – 25 35 – 55
20 – 30 10 – 15 3 – 6 8 – 12
15 – 30 30 – 40

9

enFavourite button

Potatoes boiled in their skin Boiled potatoes Pasta 1 Stew

4.5 – 5.5 4.5 – 5.5 6 – 7 3.5 – 4.5

Soups Vegetables Vegetables, frozen Stew in a pressure cooker Braising Rolled roasting joint Pot roast Goulash 2 Braising/frying with a small amount of fat 1 Escalope, plain or breaded Escalope, frozen Chops, plain or breaded Steak (3 cm thick) Poultry breast, 2 cm thick Poultry breast, frozen Rissoles (3 cm thick) Hamburgers (2 cm thick) Fish and fish fillet, plain 1 Without lid 2 Preheat to power level 8 – 8.5

3.5 – 4.5 2.5 – 3.5 3.5 – 4.5 4.5 – 5.5
4 – 5 4 – 5 3 – 4
6 – 7 6 – 7 6 – 7 7 – 8 5 – 6 5 – 6 4.5 – 5.5 6 – 7 5 – 6

25 – 35 15 – 30 6 – 10 120 180 15 – 60 10 – 20 7 – 20 –
50 – 65 60 – 100 50 – 60
6 – 10 6 – 12 8 – 12 8 – 12 10 – 20 10 – 30 20 – 30 10 – 20 8 – 20

Fish and fish fillet, breaded

6 – 7

Fish, breaded and frozen, e.g. 6 – 7 fish fingers

Prawns and scampi

7 – 8

Sautéing fresh vegetables and 7 – 8 mushrooms

Stir-fry, vegetables, meat cut in 7 – 8 strips Asian-style

Frozen dishes, e.g. stir-fries

6 – 7

Pancakes, cooked one after the 6.5 – 7.5 other

Omelette (cooked one after the 3.5 – 4.5 other)

Fried eggs in oil

5 – 6

Deep-frying, 150200 g per portion in 12 l oil, deep-fat fried in portions1

Frozen products, e.g. chips, chicken nuggets

8 – 9

Croquettes, frozen

7 – 8

Meat, e.g. chicken portions

6 – 7

Fish, breaded or battered

6 – 7

Vegetables, mushrooms,

6 – 7

breaded, beer-battered or tem-

pura

Small baked items, e.g. dough- 4 – 5 nuts, battered fruit

1 Without lid 2 Preheat to power level 8 – 8.5

8 – 20 8 – 15 4 – 10 10 – 20 15 – 20 6 – 10 3 – 10 3 – 6
–
–

Favourite button

Favouritebutton
You can use the function to select two functions or cooking settings which can then be quickly accessed on .
9.1Assigning Favourite button functions
Requirement: Connect the appliance to Home Connect. You can find more information about this under Home Connect

1. To assign functions, open the Home Connect app and follow the instructions.
2. As soon as you have assigned the functions, you can use them:
a Function 1: Press briefly. a Function 2: Press and hold .
Note: If you have not assigned any functions, switches off once the hob is switched on.

10 CombiZone CombiZone
It allows two cooking zones of the same size to be combined, with the same power level being switched on in both. This is intended in particular for cooking with long cookware. This function allows you to cook with one item of cookware that occupies one cooking zone and that can be moved from one zone to another for increased convenience. In this case, the two zones also retain the same power level and the same settings.

10.1Positioning the cookware
Use cookware that fits into the cooking zones.

10

10.2Switching on CombiZone
1. Select one of the two cooking zones and set the power level.
2. Press . a The function is activated.

11 Time-setting options Time-settingoptions
Your hob has various functions for setting the cooking time: ¡ Switch-off timer ¡ Timer The button is assigned to the Switch-off timer function by default. However, you can also assign one of the above-mentioned functions to the sensor.You can change these settings via the Home Connect app or in the basic settings Page 13.

11.1Switch-off timer

Allows you to programme a cooking time for one or more cooking zones and their automatic switch-off once the time set has elapsed.

Switching on Switch-off timer

1. Select the cooking zone and the power level. 2. Press .

a and

light up.

3. Within the next 10 seconds, set the required cooking time in the settings area.

You can set intermediate values between 1 minute and 9 minutes in increments of 30

seconds. To do this, use to select the intermediate values.

To select a time in hours, e.g. 1 h 30 mins, press the numerical sequence 1 – 3 – 0 in the settings

area. If you select a time of more than 60 minutes, the time is automatically displayed in

hours.

Power Boost

PowerBoost
The PowerBoost function enables you to heat up large quantities of water faster than when using . This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, and flash on the display for the selected cooking zone. is then set automatically without activating the function.

Time-setting optionsen
10.3Switching off CombiZone
Touch . a The function is switched off. a The two cooking zones once again operate inde-
pendently of one another.
4. Touch to confirm. a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds. Changing or switching off Switch-off timer 1. Select the cooking zone and then touch . 2. To switch off the function, change the cooking time
or set it to .
11.2Timer
Enables a clock to be activated. This function operates independently of the cooking zones and other settings. It does not automatically switch off the cooking zones. Switching on Timer Requirement: Assign the function to . 1. Press . 2. Select the required time. a The time starts to elapse. a A signal tone sounds and the displays flash once
the time has elapsed. Changing or switching off the Timer 1. Press . 2. To switch off the function, change the cooking time
or set it to .
12.1Switching on PowerBoost
1. Select the cooking zone. 2. Touch a The display lights up. a The function is activated.
12.2Switching off PowerBoost
1. Select the cooking zone. 2. Touch . a The display goes out and the cooking zone
switches back to power level a The function is switched off. Note: In certain circumstances, the appliance switches this function off to protect the electronic elements inside the hob.

11

enPanBoost

13 PanBoost PanBoost

1

You can use this function to heat up pans more quickly than with . Do not use the PowerBoost function with frying pans this may damage the coating. You can activate the function via Home Connect or Favourite button. This function is available for all cooking zones, provided the other cooking zone on the same side is not in use. Otherwise, and flash on the display for the selected cooking zone. then switches on automatically.

13.1Recommended applications
¡ Do not place a lid on the pan. ¡ Never leave pans unattended when they are heating
up.

14 Keep-warm function Keep-warmfunction

1

You can use this function to melt chocolate or butter, and to keep meals warm. You can activate the function via Home Connect or Favourite button.

14.1Switching on Keep-warm function
Requirement: Assign the function to . “Favourite button”, Page 10. 1. Select the required cooking zone.

15 Childproof lock Childprooflock
The hob is equipped with a childproof lock. You can use this to prevent children from switching on the hob.
15.1Switching on Childproof lock
Requirement: The hob must be switched off. Touch and hold for 4 seconds. a lights up for 10 seconds. a The hob is locked

¡ Only use cold pans. ¡ Use pans with a completely flat base. Do not use
pans with a thin base.
13.2Switching on PanBoost
Requirement: Assign the function to . “Favourite button”, Page 10. 1. Select the cooking zone. 2. Touch . a lights up. a The function is activated.
13.3Switching off PanBoost
1. Select the cooking zone. 2. Select the power level. a goes out a The function is switched off. Note: To avoid high temperatures, this function automatically switches itself off after 30 seconds.
2. Touch . lights up.
a The function is switched on.
14.2Switching off Keep-warm function
1. Select the cooking zone. 2. Set to
goes out. a The function is switched off.
15.2Deactivating the childproof lock
1. To switch on the hob, touch . 2. Touch and hold for 4 seconds. a The lock is released.
15.3Automatic childproof lock
You can also activate the childproof lock automatically every time the hob is switched off. You can find out how to switch the function on and off in the “Basic settings” section Page 13.

1 Available depending on software version. Further information on availability can be found on the website. 12

Pauseen

16 Pause Pause
You can use the function to pause and resume active cooking processes for up to 10 minutes without changing the settings you have selected. You can switch the function on to clean the control panel, for example.
16.1Activating the Pause function
Press . a lights up in the cooking zone displays.

a All active cooking processes are stopped. The settings are retained.
a The function is activated.
16.2Deactivating the Pause function
Touch . a The function is switched off. The cooking processes
continue. Note: After approximately 10 minutes, the cooking zone automatically switches off.

Individual safety switch-off

Activate the safety function if one cooking zone is in operation for an extended period and you do not change any settings. The cooking zone displays and switches itself off. The time depends on the selected power level.

Power level 1.0 – 1.5

Time 10 hours

2.0 – 3.5 4.0 – 5.0 5.5 – 6.5 7.0 – 7.5 8.0 – 9.0

5 hours 4 hours 3 hours 2 hours 1 hour

Press any button to switch on the cooking zone.

Basic settings

Basicsettings
You can configure the basic settings for your appliance to meet your needs.

18.1Overview of the basic settings

Display

Setting Childproof lock “Childproof lock”, Page 12

Audible signals

Volume of the audible signals

Assign one of the time-setting programme

functions to on the control panel.

“Time-setting options”, Page 11

1 Factory setting

Value – Manual.1 – Automatic. – Function switched off. – The confirmation signal, the fault signal and the sig-
nal for incorrect use are deactivated. – The fault signal is activated. – The confirmation signal and the signal for incorrect
use are activated. – All signal tones are switched on 1. – Quiet. – Medium.1 Loud. – Switch-off timer.1 – Timer.

13

enCookware test

Display

Setting Power limitation This enables you to limit the total power of the hob, if required, due to the circumstances of your electrical installation. Observe the regulations of the local electricity suppliers. The available settings depend on the maximum power of the hob. You can find more information on the rating plate. If the function is switched on and the hob has reached the set power limit, the required and permitted power level flashes and you cannot select a higher power level. Demo mode Demonstration mode for the hob: When you switch on the hob, lights up for a few seconds and the cooking zones do not heat up. Cookware test You can use this function to test the quality of the cookware. “Cookware test”, Page 14 Hob-based hood control The settings are configured based on the extractor hood model. Restoring factory settings

1 Factory setting

Value The power is increased by 500 W with each level.
Switched off. Maximum power of the hob 1. – 1000 W. Lowest power setting. . – 1500 W. … – 3000 W. . – 3500 W. – 4000 W. . – 4500 W. … – Maximum power of the hob. – Switched off.1 – Switched on.
– Not suitable. – Not optimal. – Suitable. “Overview of the hood control settings”, Page 17
– Individual settings 1. – Factory settings.

18.2To go to the basic settings
Requirement: The hob must be switched off. 1. To switch on the hob, touch . 2. Within the next 10 seconds, touch and hold
seconds.

for 4

Product information Customer service directory Production number Production number 1 Production number 2

Display

a The first four displays provide the product information. Touch to view the individual displays.

3. Touch to access the basic settings. a and light up as a presetting. 4. Touch repeatedly until the desired setting ap-
pears. 5. Select the required setting in the settings area. 6. Touch and hold for 4 seconds. a This saves the settings.
18.3Discarding changes to the basic settings
Touch . a All changes are discarded and not saved.

19 Cookware test Cookwaretest
The quality of the cookware has a major influence on the speed and the result of the cooking process. You can use this function to test the quality of the cookware. Before the test, ensure that the diameter of the cookware base corresponds to the diameter of the cooking zone being used. Access is via the basic settings. Page 13
19.1Carrying out Cookware test
1. At room temperature, place the cookware with approx. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size.
14

2. Call up the basic settings and select . 3. Touch the settings area. flashes in the cooking
zones. a The function is switched on. a After 20 seconds, the result appears in the cooking
zone displays.
19.2Checking the result
You can see what the result means for the quality and speed of the cooking process in the following table.

Result The cookware is not suitable for the cooking zone and therefore does not heat up. The cookware is taking longer to heat up than expected and cooking is not progressing as well as it ought to. The cookware is heating up correctly and cooking is progressing well.

Home Connect

HomeConnect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Tip: Please also follow the instructions in the Home Connect app. Notes ¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed when operating the appliance via the Home Connect app. “Safety”, Page 2 ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. ¡ In networked standby mode, the appliance requires a maximum of 2 W. ¡ Hobs are not designed to be left unattended. Always monitor the cooking process.
20.1Setting up the Home Connect app
1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect. The Home Connect app guides you through the entire login process.

Home Connecten Note: If you have any unfavourable results, reposition the cookware on a smaller cooking zone, if available. To reactivate this function, touch the settings area.
20.2Setting up Home Connect
Requirements ¡ The appliance is connected to the power supply and
is switched on. ¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smartphone. ¡ The Home Connect app has been installed on your mobile device. ¡ The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location. ¡ The mobile device and the appliance are within range of your home network’s Wi-Fi signal.

Open the Home Connect app and scan the following QR code.

2. Follow the instructions in the Home Connect app.

20.3Wi-Fi symbol
The Wi-Fi indicator on the main screen changes according to the status and quality of the connection and the availability of the Home Connect server.

status Lights up steadily at half brightness. Flashes at full brightness.
Lights up steadily at full brightness. Flashes.
Switched off.

Description No network connection saved. Network connection is being established. Network connection saved and Wi-Fi active. Network settings are reset. Network not active.

20.4Adding or removing a Wi-Fi home network
The following overview shows how to add or remove a Wi-Fi home network.

15

enHome Connect

Wi-Fi home network status No Wi-Fi home network stored. The Wi-Fi home network has now been saved. The Wi-Fi home network has now been saved.

Action
To add the Wi-Fi home network, briefly press . To pair another appliance, press and hold . To reset the Wi-Fi home network settings, press and hold . If flashes, press and hold again.

20.5Changing settings via the Home Connect app
You can use the Home Connect app to change the settings for the cooking zones and send them to the hob. Requirement: The hob is connected to the Wi-Fi and to the Home Connect app. 1. Select the setting in the Home Connect app and
send it to the hob. Follow the instructions in the Home Connect app. Settings that you send from the Home Connect app to the hob must be confirmed on the hob. a As soon as cooking settings are transmitted to a cooking zone, the display starts to flash, depending on the setting. 2. Press to confirm the setting. 3. To discard the setting, press any other touch field on the hob.

20.6Activating automatic presence detection 1
Thanks to the automatic presence detection function, you no longer need to confirm parameters on the hob from your mobile device, provided you are near the hob. If you send settings to a cooking zone, you can confirm these directly from your mobile device. Requirements ¡ The hob is connected to the Wi-Fi and to the
Home Connect app. ¡ The Bluetooth is connected to the mobile device. ¡ The user is near the hob. 1. Open the Home Connect app. 2. In order to set the automatic presence detection, fol-
low the instructions in the Home Connect app.

20.7Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server.

As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful. Notes ¡ The software update consists of two steps.
The first step is the download. The second step is the installation on your appli-
ance. ¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. ¡ Installation takes a few minutes. You cannot use your appliance during installation. ¡ We recommend that you install security updates as soon as possible.
20.8Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.
20.9Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi communication module installed). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ¡ The current software and hardware version of your appliance. ¡ Status of any previous reset to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

1 Available depending on software version. Further information on availability can be found on the website. 16

Hob-based hood control

21 Hob-based hood control Hob-basedhoodcontrol
If the hob and the extractor hood are Home Connectcompatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app. Notes ¡ Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based hood control during this time. ¡ You can only connect to the extractor hood via the Home Connect app. Other connection routes are no longer supported.
21.1Controlling the extractor hood via the hob
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off. You can select other settings using the controls on the hob. Note: If you cannot find these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the connection.
Connecting the fan In order to set the hood from the hob, you must first
assign the hood function to Favourite button. “Favourite button”, Page 10 If you assign the hood function , you can choose between setting the fan, automatic mode or the hood lighting.
Setting the fan Requirement: The function is assigned to Favourite button.

1. Press . 2. Select the required setting in the settings area.
You can select the following settings:
Fan off Fan setting 1 Fan setting 2 Fan setting 3 Intensive mode 1 Intensive mode 2 Automatic mode
Note: Available depending on extractor hood model. a The fan is switched on. 3. Press to switch off the fan.
Switching on automatic mode You can set automatic mode using the hob’s control panel. Requirement: The function is assigned to Favourite button. 1. To switch on automatic mode, press . 2. To switch off automatic mode, press .
Setting the hood lighting You can switch the hood light on and off using the hob’s control panel. Requirement: The function is assigned to Favourite button. 1. To switch the lighting on, press . 2. To switch the lighting off, press again.

21.2Overview of the hood control settings
In the basic settings for your hob, depending on the extractor hood model, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off. If you cannot find these settings for your hob, check the settings of the extractor hood in the Home Connect app to configure the connection. The display shows this setting only when the appliance has been connected to the extractor hood.

Indicator Setting Setting for whether and how the fan switches on automatically.
Setting for whether and how the fan is to run on after switching off the hob. 1 Factory setting 2 Depending on the appliance specifications

Value Automatic fan start-up
Switched off. The extractor hood must be switched on manually, if required.
Switched on in manual mode. The extractor hood is switched on at a specified setting when a cooking zone is switched on.
1, Switched on in automatic mode. In automatic mode, the extractor hood switches itself on when one of the cooking zones is switched on. 2 Fan run-on
Fan switches off when the hob is switched off Switched on with standard fan run-on No change to the settings 1, Switched on in automatic mode 2

17

Cleaning and servicing

Indicator Setting The lighting switches itself on when the hob is switched on.
The lighting switches itself off when the hob is switched off.
1 Factory setting 2 Depending on the appliance specifications

Value Switching the lighting on automatically
Switched off 1 Switched on Switching the lighting off automatically 1 Switched off Switched on

22 Cleaning and servicing Cleaningandservicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
22.1Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, a retailer or the online shop www.bosch-home.com. ATTENTION! Unsuitable cleaning products may damage the surfaces of the appliance. Never use unsuitable cleaning products. Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products ¡ Undiluted detergent ¡ Detergent intended for dishwashers ¡ Abrasive cleaning products ¡ Aggressive cleaning products such as oven spray
or stain remover ¡ Abrasive sponges ¡ High-pressure or steam jet cleaners

22.2Cleaning the hob
Clean the hob after every use to stop cooking residues from getting burnt on. Requirement: The hob must be cold. Do not allow the hob to cool down if it has sugar stains, rice starch, plastic or aluminium foil on it. 1. Remove heavy soiling using a glass scraper. 2. Clean the hob with a cleaning agent for glass
ceramic. Follow the cleaning instructions on the packaging of the cleaning agent. Tips ¡ You can achieve good cleaning results using a
special sponge for glass ceramic. ¡ If you keep the base of the cookware clean, the
hob surface remains in a good condition.
22.3Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this. Note: Do not use a glass scraper. 1. Clean the hob frame with hot soapy water and a soft
cloth. Wash new sponge cloths thoroughly before use. 2. Dry with a soft cloth.

23 Troubleshooting Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
“Customer Service”, Page 20

WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord or the appliance power cable of
this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.
23.1Warnings
Notes ¡ If or appears in the displays, press and hold the
sensor for the respective cooking zone and read the fault code.

18

Troubleshooting

¡ If the fault code is not listed in the table, disconnect the hob from the power supply and wait 30 seconds before reconnecting it. If this display appears again, contact customer service and specify the exact fault code.

¡ If an error occurs, the appliance does not switch to standby mode.
¡ In order to protect the appliance’s electronic parts from overheating or surge currents, the hob may temporarily reduce the power level.

23.2Information on the display panel

Fault No displays light up.
The displays flash. , , ,
, + power level and
audible signal and signal tone
/
/ /
Home Connect is not working properly. The hood control is not working properly. Animations on the
displays

Cause and troubleshooting
The power supply has been disconnected. Use other electrical appliances to check whether there has been a power failure. The appliance has not been connected as shown in the circuit diagram. Connect the appliance in accordance with the circuit diagram. Electronics fault If you are unable to rectify the fault, inform the technical after-sales service. The control panel is wet or an object is covering it. Dry the control panel or remove the object. The electronics have overheated and one or all of the cooking zones have been switched off. Wait until the electronics have cooled down sufficiently. Then touch any button on the
control panel.
There is hot cookware in the vicinity of the control panel. This may cause the electronics to overheat. Remove the cookware. The fault display goes out shortly afterwards. You can continue to
cook.
There is hot cookware in the vicinity of the control panel. The cooking zone has been switched off to protect the electronics. Remove the cookware. Wait a few seconds. Touch any button. When the fault display
goes out, you can continue cooking.
The cooking zone has overheated and has been switched off to protect the work surface. Wait until the electronics have cooled down sufficiently before switching the cooking
zone back on.
The cooking zone has been operating continuously for an extended period. Individual safety switch-off is switched on. Touch any button to switch off the display so
that you can set the cooking zone.
The operating voltage is incorrect and outside of the normal operating range. Contact your energy supplier. The hob is not connected correctly. Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia-
gram.
Demo mode is activated. Switch off demo mode in the basic settings. Different causes are possible. Go to www.home-connect.com. The hood control functions do not switch on. Resetting and re-pairing the settings of the Wi-Fi home network In certain circumstances, the hob can perform self-maintenance tasks, e.g. a firmware update, optimisation or troubleshooting. Wait until the process is complete and only then switch the hob on.

23.3Normal noises from your appliance
An induction hob may sometimes cause noises or vibrations, such as buzzing, crackling, hissing noises, fan noises or rhythmic noises.

19

Disposal

24 Disposal Disposal
24.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

25 Customer Service CustomerService
Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

25.1Product number (E-Nr.), production number (FD) and consecutive numbering (ZNr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (ZNr.) on the appliance’s rating plate. The rating plate can be found: ¡ on the appliance certificate. ¡ on the lower section of the hob. The product number (E no.) can also be found on the glass ceramic. You can also display the customer service index (KI) and the production number (FD) in the basic settings. Page 13 Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

26 Information regarding Free and Open Source Software InformationregardingFreeandOpenSourceSoftware

This product includes software components that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

27 Declaration of Conformity DeclarationofConformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.

1 Depending on the appliance specifications 20

A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your appliance.

Test dishesen A detailed Declaration of Conformity can be found online at www .bosch-home.co.uk among the additional documents on the product page for your appliance.1

Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1

2.4 GHz band (24002483.5 MHz): Max. 100 mW 5-GHz band (51505350 MHz + 54705725 MHz): max. 130 mW

BE

BG

CZ

DK

DE

EE

FR

HR

IT

CY

LI

LV

MT

NL

AT

PL

PT

RO

SE

NO

CH

TR

IS

UK (NI)

5 GHz WLAN (Wi-Fi): For indoor use only.

IE

EL

ES

LT

LU

HU

SI

SK

FI

AL

BA

MD

ME

MK

RS

UK

UA

5 GHz WLAN (Wi-Fi): For indoor use only.

27.1Statement of Compliance for Great Britain
The full Statement of Compliance according to the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 can be found online at www.bosch- home.co.uk among the additional documents on the product page for your appliance.
Product type This statement of compliance covers the products described in this information for use whose model identifier group is seen on the title page. The full model identifier is made up of the characters before the slash in the product number (E no.) which can be found on the rating plate. Alternatively, you can also find the model identifier in the first line of the UK Energy Label.

Name and address of manufacturer BSH Hausgeräte GmbH, Carl-Wery-Strasse 34, 81739 München, Germany This statement of compliance is prepared by the manufacturer. The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and,
where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1; ¡ provision 5.3-13 of ETSI EN 303 645 v2.1.1. Support period BSH Hausgeräte GmbH will provide security updates that are necessary to maintain the main functions free of charge until at least 28/02/2034.

28 Test dishes Testdishes
These recommended settings are intended for test institutes to facilitate the testing of our appliances. The tests were carried out using our cookware sets for induction hobs. If required, these accessory sets can be purchased at a later point from specialist retailers, or through our technical after-sales service or our online shop.
28.1Melting the chocolate coating
Ingredients: 150 g dark chocolate (55% cocoa). ¡ 16 cm saucepan without lid
Boiling: Power level 1.5

28.2Heating and keeping lentil stew warm
Recipe in accordance with DIN 44550 Initial temperature 20 °C Heating up without stirring ¡ 16 cm saucepan with lid, amount: 450 g
Heating up: Duration 1 min. 30 sec., power level 9
Simmering: Power level 1.5 ¡ 20 cm saucepan with lid, amount: 800 g
Heating up: Duration 2 min. 30 sec., power level 9
Simmering: Power level 1.5

1 Only applies to Great Britain 21

enTest dishes
28.3Heating and keeping lentil stew warm
E.g.: Lentil diameter 57 mm. Initial temperature 20 °C Stir after heating for 1 minute ¡ 16 cm saucepan with lid, amount: 500 g
Heating up: Duration approx. 1 min. 30 sec., power level 9
Simmering: Power level 1.5 ¡ 20 cm saucepan with lid, amount: 1 kg
Heating up: Duration approx. 2 min. 30 sec., power level 9
Simmering: Power level 1.5
28.4Béchamel sauce
Milk temperature: 7 °C ¡ 16 cm saucepan without lid, ingredients: 40 g but-
ter, 40 g flour, 0.5 l milk with 3.5% fat content and a pinch of salt Preparing Béchamel sauce 1. Melt the butter, stir in the flour and salt, and heat up the mixture. Heating up: Duration 6 min., power level 2 2. Add the milk to the roux and bring to the boil, stirring continuously. Heating up: Duration 6 min. 30 sec., power level
7 3. Once the Béchamel sauce comes to the boil, leave
it on the cooking zone for a further two minutes. Simmering: Power level 2
28.5Cooking rice pudding with the lid on
Milk temperature: 7 °C 1. Heat the milk until it starts to rise up. Heat up without a lid. Stir after heating for 10 min. 2. Set the recommended power level and add rice, sugar and salt to the milk. The cooking time, including heating up, is approx. 45 minutes. ¡ 16 cm saucepan, ingredients: 190 g short- grain
rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 Simmering: Power level 3 ¡ 20 cm saucepan, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 Simmering: Power level 3, stir after 10 minutes

28.6Cooking rice pudding without a lid
Milk temperature: 7 °C 1. Add the ingredients to the milk and heat the mixture up while stirring continuously. 2. Once the milk has reached approx. 90 °C, select the recommended power level and leave it to simmer on a low heat for approx. 50 minutes. ¡ 16 cm saucepan without lid, ingredients: 190 g
short-grain rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 Simmering: Power level 3 ¡ 20 cm saucepan without lid, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 Simmering: Power level 2.5
28.7Cooking rice
Recipe in accordance with DIN 44550 Water temperature: 20 °C ¡ 16 cm saucepan with lid, ingredients: 125 g long-
grain rice, 300 g water and a pinch of salt Heating up: Duration approx. 2 min. 30 sec.,
power level 9 Simmering: Power level 2 ¡ 20 cm saucepan with lid, ingredients: 250g longgrain rice, 600 g water and a pinch of salt Heating up: Duration approx. 2 min. 30 sec.,
power level 9 Simmering: Power level 2.5
28.8Roasting a pork loin
Initial temperature of the loin: 7 °C ¡ 24 cm pan without lid, ingredients: 3 pork loins,
total weight approx. 300 g, 1 cm thick, and 15 g sunflower oil Heating up: Duration approx. 1 min. 30 sec.,
power level 9 Simmering: Power level 7
28.9Preparing crêpes
Recipe in accordance with DIN EN 60350-2 ¡ 24 cm pan without lid, ingredients: 55 ml batter per
crêpe Heating up: Duration 1 min. 30 sec., power level
9 Simmering: Power level 7
28.10Deep-fat frying frozen chips
¡ Pot dia. 20 cm without lid: ingredients: 2 l sunflower oil. For each frying time: 200 g frozen chips, 1 cm thick. Heating up: Power level 9, until the oil temperature reaches 180 °C. Simmering: Power level 9

22

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from: · Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service Free and easy registration also on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com A Bosch Company
9001794534
9001794534(040326) en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom