LINIZ V2 zDental Model Gray Light Curing Instruction Manual
- June 15, 2024
- LINIZ
Table of Contents
LINIZ V2 dental Model Gray Light Curing
Product Information
Specifications
- Product Name: dental Model Gray V2
- Product Type: Light-curing resin
- Compatible Printers: 3D LCD printers utilizing wavelengths 385nm or 405nm
- Color: Gray
- Packaging Options: 500ml/bottle, or 5L/drum
Description
dental Model Gray V2 is a light-curing resin designed for the production of
dental models. It is specifically formulated for use with 3D LCD printers that
operate at wavelengths of 385nm or 405nm.
This resin offers fast and effective printing, making it suitable for various
dental applications. Its low viscosity ensures excellent precision, long-term
dimensional stability, high reliability, superior fit, and easy cleaning. It
is ideal for diagnostic models and orthodontic appliance models.
Intended Use
This resin is intended for use in the production of orthodontic models, die models, implant models, and diagnostic models.
Contra-indications
zDental Model Gray V2 contains (meth)acrylate and phosphine oxide, which may cause allergic reactions upon skin contact. If an allergic reaction occurs, please seek medical attention.
Use and Safety Information
- Wear nitrile rubber gloves and a face mask when handling this resin.
- Ensure proper ventilation in the room where the printing takes place.
- Avoid eating or drinking in the printing area.
- Avoid direct contact of liquid or uncured resin with the skin.
- If contact occurs, wipe away the resin and wash the affected area thoroughly with cold water. Hand sanitizer or soap can be used to assist in washing. If discomfort persists, seek medical attention.
- In case of resin splashes in the eyes, flush with plenty of water and seek immediate medical attention.
- For additional safety information, please refer to the MSDS (Material Safety Data Sheet) of this resin.
Product Usage Instructions
Mixing Resin
- In Bottle: Shake the bottle vigorously before pouring the resin into the resin tank.
- In Resin Tank: Stir the resin in the tank using a soft spatula. Be careful not to damage the film of the resin tank. This step is necessary to prevent printing issues caused by possible pigment sediment.
- After printing, it is recommended to transfer any remaining resin back into the bottle and avoid leaving it in the resin tank for an extended period.
Preparation
- Prepare a print job using slicing software compatible with your UNIZ printer, such as Uniz Dental, Uniz Desktop, or Uniz Maker. zDental Model Gray V2 can be printed at a layer thickness of 50μm or 100μm. For more detailed instructions, refer to the Unit
- Dental Software Guide available at www.uniz.com.
Printing
- Turn on the printer and ensure it is properly set up.
- Check and clean the build platform, resin tank, and LCD printing screen.
- Place the resin tank filled with mixed resin onto the LCD printing screen and securely fix it.
- Upload the slicing file into the printer either through USB or WIFI.
- Start the printing process following the printer’s instructions. For more information, refer to the printer instructions available at www.uniz.com.
Post-processing
Detaching Printed Parts:
Once the printing process is complete, it is recommended to allow the printed
parts to drip for approximately 10 minutes.
Use a soft spatula to remove any resin residue on the build platform into the
resin tank. Carefully detach the printed objects from the build platform.
FAQ (Frequently Asked Questions)
Q: Can zDental Model Gray V2 be used with all 3D printers?
- A: No, zDental Model Gray V2 is specifically designed for use with 3D LCD printers utilizing wavelengths of 385nm or 405nm.
Q: What are the recommended safety precautions when using this resin?
- A: When using dental Model Gray V2, it is important to wear nitrile rubber gloves and a face mask. Ensure proper ventilation in the printing area and avoid direct skin contact with uncured resin.
- In case of skin contact or resin splashes in the eyes, follow the provided safety instructions and seek medical attention if necessary.
Q: How should I store the remaining resin after printing?
- A: After printing, it is recommended to transfer any remaining resin back into the original bottle and avoid leaving it in the resin tank for an extended period.
Product Description
- dental Model Gray V2 is a light-curing resin for the production of dental models using 3D LCD printers utilizing wavelengths 385nm or 405nm. zDental Model Gray V2 is an effective and fast-printing resin.
- This low-viscosity model material is ideal for diagnostic models and orthodontic appliance models requiring excellent precision, long-term dimensional stability, high reliability, superior fit, and easy cleaning.
Intended Use:
- Orthodontic models, die models, implant models, diagnostic models,
Color and Package:
- Gray
- 500ml/bottle, or 5L/drum
Contra-indications
- zDental Model Gray V2 contains (meth)acrylate and phosphine oxide which can cause allergic reactions at skin contact.
- In case of an allergic reaction, please contact a medical physician.
Use and Safety Information
- Wear nitrile rubber gloves and a face mask when using this resin.
- Keep the room ventilated.
- Swallowing such as eating and drinking is forbidden in the printing place.
- Avoid liquid or incompletely cured resin directly in contact with the skin. If contact with skin occurs, wipe resin away and wash thoroughly with cold water, use hand sanitizer or soap to assist in washing.
- If the users still feel uncomfortable, please see a doctor immediately.
- If the user accidentally splashes the resin in the eyes, flush with plenty of water and seek medical attention immediately.
- For more safety details please refer MSDS of this resin.
- The good use temperature for this resin is 21 – 25 ℃. Keep the resin away from direct sunlight or any kind of UV light.
Processing printed parts
Mixing resin before using:
- In Bottle: Shake the bottle vigorously before pouring it into the resin tank.
- In resin tank: Stir resin with a soft spatula. Take care not to damage the film of the resin tank. This step is necessary to avoid getting a bad printing job caused by the (possible) pigment sediment from the bottom of the vessel.
- After the model is printed, it is recommended to restore the remaining resin into the bottle and avoid leaving the resin in the resin tank for a long time.
Preparation:
- Prepare a print job using slicing software, such as Uniz Dental, Uniz Desktop, or Uniz Maker, in depending on the UNIZ printer type. dental.
- Model Gray V2 should therefore not be used in patients with known hypersensitivity (allergy) to these ingredients can be printed in layer thickness of 50μm or 100μm.
- For more information, please refer to the Uniz Dental Software Guide (www.uniz.com).
Printing:
- Turn on the printer and ensure it is well. Check and clean the build platform, resin tank, and LCD printing screen. Put the resin tank filled with mixed resin onto the LCD printing screen, and fix the tank well onto the screen.
- Upload the slicing file into the printer through
- USB or WIFI, then start printing. For more information, refer to the printer instructions (www.uniz.com).
Post-processing
Detaching printed parts:
- Once the printing process has ended, a dripping time of resin of approximately 10 min is recommended, using a soft spatula to remove the resin residue on the build platform into the resin tank.
- Then, carefully detach the printed objects from the build platform.
Washing:
- Wash parts in an IPA bath with at least 98% purity. Best results are achieved when using a pre and post-wash.
- UWash ultrasonic cleaner is recommended for washing parts.
- Pre-wash bath: 1 minute. After use, if the IPA density increases by 5%, alternate clean IPA for this pre-washing step.
- Post-wash bath: 1 minute, always use clean IPA for each post-washing step.
- If necessary, a dedicated soft brush can be used to help remove residual resin.
Drying:
- Use compressed air to dry parts. If residual resin remains, repeat the “washing-drying“ steps. Ensure parts dry thoroughly before post-curing.
Post-Curing:
- Post-curing is a UV-LED light treatment to ensure that printed parts obtain optimal polymer conversion, decreasing the residual monomer of printed parts to a minimum and obtaining the required mechanical properties and surface properties.
- UCure, a post-cured device from UNIZ, is recommended to cure parts. Both the occlusal side and the other side are needed to be post-cured.
- One side: 1 minute, level 2, UCure
- The Other side: 1 minute, level 2, UCure
- If the printed part is supported, cure the non-supported side of the printed part at first, then remove supports by the same tools, and finally cure the supported side.
- Before use, the support stub needs to be ground and polished smoothly and cleaned thoroughly.
Storage:
- Stored in a dark place where direct sunlight or any kind of UV light, the environment temperature is recommended around 15 to 28℃ and environment humidity is less than 45%RH. Do not use a resin that exceeds the expiry date.
Disposal:
- Dispose of liquid resin waste under local regulations.
- The information and data stated herein are based on tests in our lab and are considered to be reliable and accurate.
- This information and data are used for reference only, with no warranty as a legal basis. Use by customers should be tested by themself firstly.
- www.uniz.com
- UNIZ TECHNOLOGY LLC
- 9400 Activity Rd Ste L San Diego, CA 92126, US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>