ZLINE MWO-24 Trim Kit Installation Guide
- June 6, 2024
- Zline
Table of Contents
ZLINE MWO-24 Trim Kit
BEFORE INSTALLATION
TOOLS NEEDED
- Air screwdriver
- Marker TOOLS
INCLUDED
Support
beam| 
Front bracket|
Rear
bracket
---|---|---
Rear
bracket| 
Rear bracket|
Trim kit
#1 Screw|
#2 Screw|
#3 Screw
INSTALLATION
-
Install thesupport beamsusing the holes in the front bracket as a guide. Use the #1 screw.
-
Remove the screws holding the microwave in place in order to install the front bracket and rear bracket.
-
Use #2 screws to installthe fourbuckles onthecorresponding mounting holes aroundthetrim kit.
-
Lineup the trimkitwiththebuckleseats.
-
Push the microwave into the slot in the rear bracket by extending the support beam (Figure 1)
-
Use screw #3 to fix the front bracket and support beam(Figure2).
-
Insert the trim kit into the corresponding buckle seat.
www.zlinekitchen.com 1-614-777-5004
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>