LUXPRO LP630V3 High Output Focusing Handheld LED Flashlight User Manual
- June 3, 2024
- LUXPRO
Table of Contents
LUXPRO LP630V3 High Output Focusing Handheld LED Flashlight User Manual
Features
- Constructed with aircraft-grade aluminum
- LPE optics
- Push/pull focus beam
- Patented TackGrip rubber grip
- High quality wrist lanyard
- Tactical on/o button
- IPX4 waterproof rating
- Batteries included (4 AAA).
Product Warranty
The LP630V3 has a Limited Lifetime Warranty Against Manufacturer’s
Defects from time of purchase.For warranty claims please contact us by calling
801-553-8886 or sending an email to
[email protected]
MODES|
LUMENS ****
|
RUN TIME ****
|
BEAM DISTANCE
---|---|---|---
High
| 630 1m| 2h 30m|
265
Medium
| 1901m| 8h|
120m
Low
| 40 1m| 20h 15m|
25m
Strobe
|
6301m
|
——
|
——–
Operation Instructions
On/Off : Press and release the button on the tail cap to turn the light
on and off.
Cycle Modes : Press button repeatedly to cycle through modes (High/Medium /Ultra-Low). If light remains in a single mode for longer than 3-5 seconds, the next press of the button will turn then light off.
Light automatically resets to High mode when turned off.
Hidden Strobe On/Off: Press and hold button for 3 seconds to activate hidden strobe. Flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 seconds again.
Focus Head: To focus the light beam, gently push the head away from the
light to extend it. Pull the head back towards the light to widen the beam.
Battery Replacement
Re-insert battery case into flashlight with the metal knob and arrow on the side of the battery case both pointing down. Re-attach the tail cap by pressing down lightly and turning it clockwise until tight
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
CUSTOMER SERVICE
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
www.luxpro.com
866.553.8886