eufy T8410 2K Security Indoor Camera Pan and Tilt User Guide
- June 3, 2024
- Eufy
Table of Contents
eufy T8410 2K Security Indoor Camera Pan and Tilt
WHAT’S INCLUDED
- Indoor Cam 2K Pan & Tilt
- Model: T84 I 0
- Mounting Plate
- USB Cable
- USBAdapter
- Mounting Screw Pack
- User Manual
PRODUCT OVERVIEW
- Lens
- Microphone
- SD card slot
- Status LED
- Speaker
- Power input
- SYNC button
SETTING UP THE SYSTEM
-
Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
-
Sign up a eufy Security account. Go to the app homepage. Tap Add Device, and add the lndoorCam Pan 2K to your system.
-
Follow the on-screen instructions to complete the setup.
LED Status
LED Status : Description
- Breathing blue Ready for setup
- Solid blue Powered on and working properly
- Blinking red Disconnected from the internet
- Blinking red once Disconnected from the internet
- Solid red Motion or sound detected
- Solid bluish violet Working properly with someone viewing the live stream or recording event
- Flashing blue and red alternately System is initializing Firmware upgrade in progress
MOUNTING THE INDOOR CAM
Select a Location for Mounting
The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling. Select a location and height where you can get the desired view, and can reach a power outlet easily.
- Disconnect the Indoor Cam from the power outlet before mounting.
- Keep the Indoor Cam at least 0.7 ft/ 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
Mount the Indoor Camera
To mount the Indoor Cam on the ceiling, follow the steps below:
-
Place the positioning card against the ceiling and then mark the points at which drilling will be required.
-
Drill holes with a 5/16″ (8 mm) drill bit.
-
Align the holes on the mounting plate with those in the ceiling. Insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. Fix the screws with a Phillipshead screwdriver to fasten the mounting plate to the ceiling.
-
Align the grooves with the mounting plate and rotate the Indoor Cam clockwise until it clicks into place.
To mount the Indoor Cam on a wall, we recommend using the mounting bracket (not provided) as the illustration below.
POWERING ON THE INDOOR CAM
Connect the Indoor Cam to a power outlet using the provided USB cable and USB
adapter. After being powered on, the Indoor Cam will be connected to the
system. When it is successfully connected, the status LED will tum solid blue.
Rotate the Indoor Cam to adjust the view and check it using the live stream
which you can access in the eufy Security app. You are now all set to use your
Indoor Cam.
Tip: For troubleshooting, check Help on the eufy Security app.
FCC Statement
This device complies with Part I 5 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part I 5 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address:400 108thAve NE Ste 400, Bellevue, WA 98004-5541
Telephone: l-800-988-7973
C E This product n complies with the radio . interference requirements of the
European Community
Declaration of Conformity
Hereby ,Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web
site:https://www.eufylife.com/.
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily
accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for T84 IO and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C-2S°C
Please ensure to use only the charger offered by the manufacturer. Using
unauthorized charger may cause danger and violate the authorization of the
device and the guarantee article.
This charger is for indoor use only.
The charger type is TEKA0 I 2-0502000EU , output voltage/current is
5Vdc/2A.The plug considered as disconnect device of adapter.
RF exposure information: The Maximum Permissible Exposure
(MPE) level has been calculated based on a distance of d=20 cm between the
device and the human body. To maintain compliance with RF exposure
requirement, use product that maintain a 20cm distance between the device and
human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412-2472MHz ;Wi-Fi Max Output Power: I
4.46dBm(ERIP)
Bluetooth Operating Frequency Range:2402-2480MHz; Bluetooth Max Output
Power:0.64dBm(EIRP)
The following importer is the responsible party ( contact for EU matters only)
Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, BI I 2AA, United Kingdom
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper – disposal and recycling helps protect natural resources, human
health and the environment. For more information on disposal and recycling of
this product. contact your local municipality, disposal service, or the shop
where you bought this product.
CUSTOMER SERVICE
-
Warranty
12-month Limited Warranty -
Call Us
United States + I (800) 988 7973 Mon-Fri 9AM-SPM (PT)
United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-1 I AM (GMT)
Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11 :00 -
Email Us
Customer Support: support@eufylife.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>