CONAIR CD900 1-inch 25mm Tourmaline Ceramic Curling Iron Instruction Manual
- June 3, 2024
- ConAir
Table of Contents
CONAIR CD900 1-inch 25mm Tourmaline Ceramic Curling Iron Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER:
Any appliance is electrically live even when the switch is off. To reduce
the risk of death by electric shock:
- Always unplug appliance immediately after using.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in, or drop into water or other liquids.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING: To reduce the risk of burns, electrocution, ire, or injury to persons:
-
This appliance should never be left unattended when plugged in.
-
Do not pull, twist, or wrap line cord around appliance.
-
This appliance should not be used by, on or near children or individuals with certain disabilities.
-
Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.
-
Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water.
Return the appliance to an authorized service center for examination and repair. -
Keep the cord away from heated surfaces.
-
Never use while sleeping.
-
Never drop or insert any object into any opening or hose.
-
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
-
Unit is hot when in use. Do not let heated surface touch eyes or bare skin.
-
Do not place the heated unit directly on any surface while it is hot or plugged in.
Please use the built-in wire kickstand. -
Never block the air openings of the appliance or place on a soft surface such as a bed or couch, where the air openings may be blocked.
Keep the air openings free of lint and other debris. -
Do not use an extension cord with this appliance.
-
Do not touch hot surfaces of the appliance.
Use handles or knobs. -
Do not attempt to touch the housing of your appliance near the barrel, as it is hot when in use.
-
Do not use with a voltage converter.
OPERATING INSTRUCTIONS
This curling iron is intended for household use.
Use on Alternating Current (60 hertz) only. This unit is designed to be
operated at 120V AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will it in a polarized outlet only one way. If the
plug does not it fully in the outlet, reverse the plug. If it still does not
it, contact a qualified electrician.
Do not attempt to defeat this safety feature.
TO CURL HAIR
Hair should be clean and completely dry before using the curling iron. Plug
the iron into an electrical outlet and make sure Lock/Unlock Slide Switch was
set to the UNLOCK position. A blue ON/OFF light will appear on the
bottom of the handle. Press down on it for a few seconds until the control
panel lights up. The default temperature setting of 320°F will appear, and
you’ll see running bars until that temperature is reached.
To select a different temperature, press (+) to increase or (–) to decrease
the temperature.
TO LOCK TEMPERATURE SETTING
Once you select your temperature setting, slide the Temperature Lock/Unlock
Slide Switch located on the side of the handle to the LOCK position. The
UNLOCK symbol on the control panel will change to the LOCK symbol.
This
setting prevents the temperature setting from accidentally changing during
use.
To change the locked temperature setting, simply slide the Temperature
Lock/Unlock Slide Switch to the UNLOCK position. Select a new temperature,
and slide the Temperature Lock/ Unlock Slide Switch to the LOCK position.
NOTE: The curling iron cannot be turned off when the Temperature
Lock/Unlock Slide Switch is in the LOCK position. Reset to UNLOCK,
then press ON/OFF for 3 to 4 seconds to turn the iron off.
However, should you fail to turn the unit off, it will shut itself off
automatically within 60 minutes.
WARNING: The curling iron’s tourmaline ceramic-coated barrel will get
very hot within a few seconds and should not come into contact with the skin
after the curling iron has been turned on. The unit has a built-in kickstand
which allows it to be placed on a countertop or other surface. The kickstand
should always be used for this purpose once the unit has been turned on.
Temperature Setting Guide
For best results, use a light styling product before blow-drying hair. Start
curling with a hair section that is 1 inch wide and no more than 1⁄2 inch
thick. Open the spoon and place a hair section on the barrel, rolling up,
close to the scalp. Release the pressure on the handle and allow the hair
section to slide out. Repeat process on additional sections of hair until you
achieve the hairstyle you desire. It may be necessary to repeat process on
certain areas, depending on the texture of your hair.
Some experience is necessary when learning to use this curling iron. After
using the iron several times, you will learn the ideal way to curl and style
your hair.
STYLING WITH THE NEW TOURMALINE CERAMIC EASY-GLIDE BARREL
The barrel of your new curling iron has a tourmaline ceramic easy-glide
surface, the newest technology. This means it’s not only simpler to clean off
styling product residue, etc., after each use, but you’ll and that hair glides
easily over the surface of the barrel as you’re curling. The tourmaline
ceramic surface also helps smooth down layaways and frizziest.
It evenly distributes heat so that the style you create has a salon-perfect,
silky smooth, shining finish. Hair also slips right through the barrel after
it’s curled.
The new Tourmaline Ceramic technology is a pleasure to work with and makes
styling your hair easier and the results more professional.
SING INSTANT HEAT, THE 9 HIGH-HEAT EMPERATURE SETTINGS & UNIFORM HEAT
RECOVERY SYSTEM
This Instant Heat technology has 9 high-heat temperature settings. There is a
temperature range that’s gentle and safe for every type of hair, from the
inset to the curliest and most resistant, and helps you create the look you
want. And that’s not all. Conair’s professional salon standards of engineering
provide you with a uniform and improved heat recovery system that maintains
the iron at constant temperatures.
There is a constant surge of power to ensure that heat is continuously and
quickly delivered for optimal styling results, unlike other units, which lose
heat during use. This provides consistent styling power so that every strand
of your hair is set with the same level of heat and comes out the same way for
a perfect finish.
GETTING TO KNOW YOUR CURLING IRON
USER MAINTENANC
- Your curling iron is virtually maintenance free.
- No lubrication is needed. Keep all vents and openings clear of dirt and dust.
- If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only.
- No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely
bent. Never wrap the cord tightly around the appliance.
Damage will occur at the high flex point of entry into the appliance, causing
it to rupture and short circuit. Inspect the cord frequently for damage.
Stop use immediately if damage is visible or if unit stops or operates
intermittently.
STORAGE
- When not in use, your appliance is easy to store.
- Allow appliance to cool, then simply store out of reach of children in a safe, dry location.
- Do not jerk or strain cord at plug connections.
- Do not wrap the line cord around the appliance.
- Allow the cord to hang or lie loose and straight at the point of entry into the appliance.
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF,YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination.
But did you know that an electric appliance is still electrically live even if
the switch is off? If the plug is in, the power is on. So when you are not
using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.
LIMITED FIVE YEAR WARRANTY (U.S. ONLY)
Conair will repair or replace (at our option) your unit free of charge for 60
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the
service center listed on back, together with your purchase receipt and $7.50
for postage and handling. California residents need only provide proof of
purchase and should call 1-800-3-CONAIR for shipping instructions. In the
absence of a purchase receipt, the warranty period shall be 60 months from the
date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60 MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR
IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the above limitation may not
apply to you.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
Customer Support
Instruction & Styling Guide
For your safety and continued enjoyment of this product, always read the
instruction book carefully before using.
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair
product, call 1-800-3-CONAIR or visit us on the web
at: www.conair.com/infiniti
©2015 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
References
- Feature To
- Welcome | Conair
- TCPDF
- besser-rasieren.de : Rasierhobel von MULCUTO - besser-rasieren.de : Infos und Produkte für eine bessere Rasur
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>