GloryFit LC304 Heart Rate Edition Smartwatch User Manual
- June 3, 2024
- GloryFit
Table of Contents
LC304 Heart Rate Edition Smartwatch
User Manual
LC304 Heart Rate Edition Smartwatch
Warnin:
Please consult your doctor before starting a new exercise program. Although
the smart watch can monitor your heart rate, it can’t be used for any medical
purpose. It is designed to help people live healthier lives. Please remember
to consult your doctor before starting any exercise and diet plan.
Device requirements
This product supports devices with iOS 9.0, Android 5.0 and above, and Bluetooth 4.0. Android 6.0 and above devices need to open the GPS permission to use.
Charging
If the device is idle for a long time, please remember to recharge at least
once a month.
Schematic diagram of the magnetic charger:
a. please align the magnetic charging cable with the metal sheet of t he
bottom shell, the magnet will automatically adsorb the positive and negative
poles for charging.
b.Please ensure that the charging contacts are free of dirt and impuriti es,
if any, please wipe them clean, otherwise it will not charge.
c. Plug the USB into a 5V500MA adapter and it will be fully charged in 2-3
hours.
Schematic diagram of wireless charger:
a. Please align the charging base with the bottom shell, and the concav e
surface of the base will automatically align with adsorption charging.
b. Ensure that there is no foreign matter adsorbed on the wireless char ging
position and the bottom of the watch, otherwise it will lead to poor c
harging.
c. Plug the USB into the 5V500MA adapter, and it will be fully charged i n 3-4
hours.
How to connect smart watch with mobile shone
4.1 Power on: charge or press the smart watch side button for 3 seconds.
4.2 lnstall APP: Scan QR code through mobile phone, or search “GloryFit”
APP in Apple APP store, Google Play Store to download and install. 4.3 How
to connect smart watch through mobile APP:
First, put the smart watch close to the mobile phone, and then turn on the
Bluetooth and GPS of the mobile phone according to the APP connection guide.
Then search the APP for the Bluetooth name is “Smart Watch”. Click the smart
watch to connect. Set personal information according to APP prompts, and allow
APP to obtain mobile authority to complete the connection.
4.3.1 Apple device connection :
After the smart watch and Apple App are connected for the first time, the
“Bluetooth pairing request” will be prompted. Please click “Pair” to complete
the connection. After pairing, it is allowed to display a notice to check
whether the Bluetooth settings are connected. Then enter the system to check
whether the sharing notice is turned on, and then the smart watch can receive
from iOS
system push Calls, SMS, QQ, WeChat and other notification reminders, otherwise
can not receive the reminders.
4.3.2 Android device connection:
When connecting with Android system, you need to open the APP background
operation permission in the mobile phone manager or system settings (please
open the options such as self-start, high power consumption, white list, etc.,
otherwise the APP will be cleared by the system, and the connection with the
smart watch will be disconnected. )
4.3.3 Connection call Bluetooth Android devices connect to Bluetooth for
calling:
After the APP is connected, the watch turns on the Bluetooth call, and the phone will pop up the call pairing prompt. Click on the pairing to complete the Bluetooth call connection with “Smart Watch”.
Some phones require manual access to settings, Bluetooth, search for “Smart
Watch (onto)” and click connect.
Apple devices connect to Bluetooth for calling: (i0S13 and above systems will
automatically connect to Bluetooth for calling after connecting to the APP,
and i0S13 and below systems need to manually connect to Bluetooth for calling.
)
After connecting the APP watch, turn on the call Bluetooth switch of the
watch, then turn on the phone settings, Bluetooth, search for Smart Watch
(xxxx), and click Connect.
4.4 Unbind:
Unbind Android device: Click unbind on the app device to unbind the smart
watch and the APP.
Unbind Apple device : Click on the device in the app to unbind the smart
watch and the app; Enter the phone settings-Bluetooth, click the exclamation
mark behind the name Smart Watch, and click Ignore this device in the pop-up
dialog box.The phone will be completely disconnected from the watch. Note:
After unbinding the watch from the Apple APP, you will also need to unbind and
unpair of phone’s Bluetooth.
Precautions
5.1. In theory, the smart watch supports operating system 1059.0,
Android5.0or above and Bluetooth 4.0 devices, but not all mobile device
models. Please refer to the actual conditions for details.
5.2. The product is charged with 5V500MA. It is strictly forbidden to use
the over-voltage load power supply to avoid hardware damage.
5.3. The smart watch battery is built-in and cannot be removed. Please do
not try to replace the battery.
5.4. The operating environment of the wristband is 0°C to 45°C ;Charging
temperature: 0°C to 45°C .
5.5. Please note when wearing: if you are sensitive skin or wearing the
wristband too tightly, you may feel uncomfortable.
5.6. Please wipe the smart watch dry before charging. Otherwise, it will
lead to failure or corrosion of charging contact point.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device most accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>