CyberAcoustics AC-5014 USB Type C Headset User Guide

June 3, 2024
CyberAcoustics

CyberAcoustics AC-5014 USB Type C Headset

CyberAcoustics-AC-5014-USB-Type-C-Headset-product

In the Package

CyberAcoustics-AC-5014-USB-Type-C-Headset-fig1

Using the AC-5014 USB Headset

Best for Use In Skype, Zoom & Other Internet Calls

Getting Started

Insert the end of the USB Headset Cable into the USB Type C port on your computer as show. The Headset features full plug-and-play support for Windows, OSX / macOS and Chromebooks. After plugging the headset into the computer’s USB Type C port, you may start any application that accepts a headset, such as Skype and begin using your headset. If the computer does not automatically recognize the headset when it is plugged into the USB Type C port, try plugging the USB Headset Cable into a different USB Type C port. If this does not work, then restart the computer. This will cause the headset to be recognized in most instances.

Controls

CyberAcoustics-AC-5014-USB-Type-C-Headset-fig3

Technical Specifications

Specifications

Sensitivity:| • -62dBV / microbar

• -42dBV / Pascal +/- 4dB

Frequency response| • Headset: 20 – 20,000Hz

• Microphone: 100 – 16,000Hz

Impedance| • Headset: 32 ohms

• Microphone: 2.2k ohms

Recommended system requirements

Supported operating systems| Windows 10, Windows 8, Windows 7, Mac OS X 10.4.11, or higher.
Operating temperature| Product working at ambient temperature for 0~35°C

Frequently Asked Questions

Frequently Asked Questions Possible Solutions

Windows 7/8:

Headset does not set up automatically

| • Open the control panel Window.

• In the upper-right corner, change “View by” to Small icons.

• Double click on “Sound”, then click on the “Playback” tab.

• Select “AC-5014 USB Headset” then click Set Default.

• Verify green circle with a check mark next to “AC-5014 USB Headset”.

• Double click on “Sound”, then click on the “Recording” tab.

• Select “AC-5014 USB Headset” then click Set Default.

• Verify green circle with a check mark next to “AC-5014 USB Headset”.

• Click Configure.

• (Optional) To adjust the headset volume, click Properties.

• When finished, click “Apply” then “OK”.

Windows 10:

Headset does not set up automatically

| • In the search box on the taskbar, type control panel, then select it from the results.

• Select Hardware and Sound from the Control Panel, and then select Sound.

• On the Playback tab, right-click “AC-5014 USB Headset”, select Set as Default Device, and then select OK.

• Verify green circle with a check mark next to “AC-5014 USB Headset”.

• On the “Recording” tab, right-click “AC-5014 USB Headset”, select Set as Default Device, and then select OK.

• Verify green circle with a check mark next to “AC-5014 USB Headset”.

• (Optional) To adjust the headset volume, click Properties.

• When finished, click “Apply” then “OK”.

Mac:

Headset does not set up automatically

| • Open the Finder Application, then select Applications.

• Open System Preferences, then click Sound.

• Select the Input tab, then select “AC-5014 USB Headset”. Make sure that the mute button isn’t selected.

• Select the Output tab, then select “AC-5014 USB Headset”. Make sure that the mute button isn’t selected

• When finished, close System Preferences.

Frequently Asked Questions Possible Solutions
Headset does not have sound / Microphone is not working • Check the

computer’s and headset’s volume level.

• Check proper seating of cable connection.

• Verify the application settings you are using.

Some applications have separate volume level control.

• Check that the computer recognizes the Headset – showing it is connected and selected within your computer OS settings. (See above for Windows and Mac settings instructions)

• Verify the input / output levels within the sound/audio settings of your computer’s settings.

• Check the mute setting. Press to un-mute if it is muted.

• Restart your computer and re-verify the above steps. Restarting often helps a computer connect to the Headset.

Customer Support

If you have a question about your Headset, our Customer Support Team wants to assist you.

Contact us at:
www.cyberacoustics.com/support/contact

Safety and Precautions

  • Read and follow all instructions – All operating and use instructions should be followed.
  • Protect the Headset from being pinched, particularly at the connectors. Unplug during lightning storms or when unused for long periods of time.
  • Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Do not make alterations to the headset.
  • Do not place near naked flame sources, such as lighted candles
  • Do not expose to excessive heat (e.g. from storage in direct sunlight, fire or the like)

2022 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other trademarks are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Supplier’s Declaration of Conformity 47 CFR $ 2.1077 Compliance Information

Unique Identifier: (AC-5014) Responsible Party – Cyber Acoustics LLC 3109 NE 109th Ave., Vancouver, WA 98682
cyberacoustics.com

Compliance Information Statement

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiving device
  • Connect the equipment into an outlet on different circuit from the receiving device
  • Consult the dealer or an experienced radio/TV technician for help
  • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

www.CyberAcoustics.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals