COMPASS BLACK MAGIC Car Seat Heating Cover Instructions

BLACK MAGIC Car Seat Heating
Cover Instructions
„BLACK MAGIC”

BLACK MAGIC Car Seat Heating Cover

control panel

• Universal heated seat cover.
• Powered by 12V car socket.
•  Built in thermostat.
• Suitable for all types of seats.
•  Even for seats with built-in airbag.
• Please read the enclosed instructions before use.

Instructions for use:

• Start the engine and connect the plug to the 12V car cigarette lighter socket.
• Turn on low or high power setting for heating.
• The plug is equipped with a glass fuse, you can replace it by unscrewing the front of the connector.
• Replace the fuse only with a new one, with the same parameters as the original one.

Maintenance:

This cover must not be washed or chemically cleaned. Perform maintenance by wiping with a damp cloth, or use non-aggressive foam fabric cleaners.
The manufacturer accepts no liability for accidents or damage resulting from noncompliance with these instructions.
Text, design and technical specifications are subject to change without notice and we reserve the right to make changes.

Disposal and recycling
Do not dispose of power tools and devices in the household waste!
According to the European Directive 2012/19 /
EC on Waste Electrical and Electronic
Equipment (WEEE) and in enforcement of national law, used power tools must be collected separately and transported to an appropriate environmentally friendly recycling facility.

Safety instructions

For the safety of the user, it is necessary to carry out the installation in the correct way.

• No part of the seatcover may cover the airbag outlet on the side of seat
• (see car documentation).
• The cover must be placed on the seat so that the seating part is placed on the seat and a support part is on the support side.
• The metal hooks are designed to be attached to the bottom of the seat and the straps are designed for the backrest.
• The cover must be fitted directly on the seat.
• There cannot be other objects placed under the cover (eg. other covers, etc.).
• Never cover the heating cover with other objects, such as pillows, other covers, etc.
• Do not fold or bend the cover to prevent possible damage.
• The product is intended only for vehicles with a 12V socket, it must not be used on vehicles with 24V socket (not even in series connection).
• The connection may only be made using the supplied 12V plug.
• Always check the cleanliness of the 12V lighter contacts and the cover plug before use.
• The plug is equipped with a glass fuse.
• The fuse can only be replaced with a new one with the same parameters.
• The seat cover must not be used in a bended or folded state.
• Unplug before leaving the vehicle.
• Do not leave turned on cover in the car unattended (battery discharge, overheating).
• Do not pierce the cover with pointed objects.
• Protect the cover from wetness and moisture.
• The seat cover must not be used if the cable insulation has been damaged, or if you find other obvious damage.
• Yoiu cannot repair or open the heating cover on your own.
• Do not, under no circumstances, wash in the washing machine.
• Improper use and / or repairs will void the manufacturer’s warranty.

Technical data:

www.compass.cz
Compass CZ s.r.o., Pražská 17 – 250 81 – Nehvizdy, CZ
e-mail: info@compass.cz
last revision 4/2022

References

• Compass - Autodoplňky • Nářadí • Outdoor

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>