GYROCOPTERS B08Z7PCSR2 Flash 3.0 Portable Electric Scooter Instruction Manual

GYROCOPTERS GYROCOPTERS
P AID ELECTRIC
SCOOTER 

INSTRUCTION MANUAL
HELNETS SAVE LIVES!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

| Correct Fitting:
Make sure your helmet covers your forehead.
---|---
| Incorrect Fitting:
The forehead is exposed and vulnerable to serious injury.

GENERAL SAFETY DIRECTIVE

• Before each use, thoroughly check the whole device, such as the motor, front wheel, folding joints, etc., whether the locking screws are fastened and reliable. Do not drive at will before correcting any problem.
• Don’t try to jump the curb/highland more than 3 cm away because it can cause damage to the scooter.
• We recommend not to use Gyrocopters Plaid Electric Scooters on rough roads and ground because it increases the likelihood of re-damage.
• Do not charge outside or use this product below -5 c.
• Pregnant women, disabled people, and people with heart problems should not use this product.
• Gyrocopters Plaid Electric Scooter is a way to move alone. Our technology and production processes are both been developed and validated through very rigorous testing.

BATTERY SAFETY INSTRUCTIONS

• Batteries should not be exposed to overheated environments such as the sun, next to fire, or similar high temperatures.
• If the Gyrocopters Plaid Electric Scooter is not used for a long me, the battery should be fully charged every 90 days. Otherwise, the battery will discharge itself and be damaged.
• If the battery releases a strong smell or heat, stop using the product immediately. Do not privately open the product. Always contact customercare@gyrocopters.com if you need any assistance.

CHARGER SAFETY INSTRUCTIONS

• Carefully check the power plugs and cables for damage before use.
• Always use the original charger provided with the product.
• Product charging must be conducted in a well-ventilated environment. Once the battery is fully charged, the charger should be disconnected immediately.
• Keep the charger away from children.
• Disconnect the battery and charger and cool it down before cleaning, storing, and shipping.
• Protect the charger and other electrical components from dampness. Do not soak them in liquid when cleaning or in use.
• Maintenance must be carried out by authorized professionals. Always contact customercare@gyrocopters.com if you need any assistance. Incorrect assembly may cause a fire or electrical shock.
• Do not charge near flammable items.
• When using the charger, ensure that the charger and the charging port are well connected and not blocked by external objects.

KNOW YOUR GYROCOPTERS PLAID ELECTRIC SCOOTER

SPECIFICATIONS

| Content| Parameters
---|---|---
Vehicle Parameters| Expand: Long, Width & Height| 1247x675x556
Net Weight| 23.6kg
Top Speed| 45Km/H
Climbing Ability| 30 Degrees
Terrain| Cities & Mountains
Operating Temperature| -5-40 Degrees
Charging Time| 4-5 Hours
Storage Temperature| -20-40 Degrees
Battery Parameters| Capacity| 10Ah
Voltage| 48v
Motor Dimensions| 10 Inches
Motor parameters| Maximum Torque| 32N
Voltage| 48v
Rated Power| 800W
Maximum Power| 1000W
Motor Type| Rear Brushless
Brake| Brake Braking Mode| t And Rear Mechanical Disc Brake
Brake Stop Distance| <4.57 M
Tire| Outer Tier Size| 10×2.75×6.5 Off-Road Tire
Outer Tire Pattern| Off-Road Pattern
Charger| Input The Voltage| 100V~240V
Maximum Load| 150KG

USER GUIDE

This second provides information about how to use the product correctly. Following these instructions is necessary for the safety of the user and the service life of the product.

|
---|---
Insert the handlebars into the tube and lock it with 4 screws.| Close the folding plug, buckle the lock, and twist the lock.

On/Off Switch: Press 2 seconds to turn the scooter On or Off. Lights Switch: Click the switch once to turn on all lights and click twice to turn off all the lights.
Horn Switch: Press and hold the horn switch for horn sound, and release the horn switch to stop the sound.
Speed Switch: Click the speed switch once to shi from Eco to standard speed mode. Click twice to switch to sports mode.
Mode Songs: Click on the mode switch to shi between metric and imperial modes.
Turning Switches: Press the le and right turning switches to turn on the corresponding turn indicator lights.

DISPLAY MODULE

Battery Indicator: Six led light bars on the display show the battery level. It is recommended not to drain the battery by 100% and charge it before use.
Le & Right Turn signal- The le and right turn signals indicate the corresponding lower turn light flash while you are steering le or right.
Double-drive mode: Double-click the headlight switch to shi to a dual-drive mode.[Applicable only for Dual Motor Models] Bluetooth connection: The display board has a Bluetooth symbol, indicating the scooter is connected to mobile Bluetooth and the app functions are active.
Cruise Control: Turn on the cruise speed function by holding down the accelerator ll you hear a beep. Once the cruise control is active you can release the acceleration handle,  the vehicle will continue to ride at a uniform speed. Cruise Control gets deactivated if you brake or press the acceleration bar again.

• Light Symbol: Aer the vehicle is powered on, press the headlight switch once to switch on all the lights. A light Symbols appear on the display when all the lights of the vehicle are turned on.
• Pedestrian mode: Walking mode symbols on the instrument display when the vehicle speed is less than 6Km/h.
• Maximum speed: It shows the top speed of the whole ride.
• Current speed: The display shows the current speed.
• Single mileage: Show the current mileage during the ride, and automatically return to zero are turning off the power supply.

GYROCOPTERS PLAID ELECTRIC SCOOTER OPERATION

Wear your helmet and personal protection gear before riding to avoid injuries.

• Press the power switch and turn on the vehicle power supply, confirm that the power is sufficient before riding.
• Standing on the deck with one foot on deck, press the acceleration once the scooter has gained momentum put the other foot on deck.
• Press the acceleration switch on the handle to accelerate, and release the switch to decelerate
• Press the rear and front brakes at the same me in case of an emergency, braking with only the front brake may cause an accident.
• When turning, please slow down and turn the handlebars slowly.

FOLDING THE SCOOTER

Turn the fold connector knob counter-clockwise until the fold connector buckle no longer holds the connector
Fold the handlebars and tubes to the rear fender.

WHAT’S IN THE BOX

1 vehicle; 4 M5*P0.8 screws, 1 x internal hexagon wrench, 1 charger

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>