OLIGHT H05 Lite Headlamp User Manual
- June 3, 2024
- OLIGHT
Table of Contents
OLIGHT H05 Lite Headlamp
IN THE BOX
SPECIFICATIONS
All above specifications are test results based on ANSI/NEMA FL1-2009 Standards. The tests are performed using two AAA Alkaline batteries included with the product.
PRODUCT OVERVIEW
AVAILABLE BATTERIES
- 2 x AAA Alkaline Battery (included)
- 2 x AAA Carbon Battery (compatible)
- 2 x AAA Lithium-iron Battery (compatible)
BEFORE FIRST USE
Before first use, please remove the protective film on the lens. Please also open the battery compartment with the key attached to the headlamp strap, remove the battery insulating film, and ensure that the batteries are inserted following the direction of the positive and negative marks. After that, close the battery compartment until the buckle “clicks” in place. When in use, please adjust the headlamp strap to wear it comfortably.
DANGER
DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
WARNING
- Please ensure that the batteries are inserted following the direction of the positive (+) and negative (-) marks.
- DO NOT power on the headlamp by mixing used and new batteries or batteries of different brands together.
- DO NOT let children wear or use the headlamp unless accompanied by a parent or legal guardian.
NOTICE
- When using alkaline or carbon batteries, please replace the batteries once they are drained, to avoid potential battery leakage.
- Before long-term storage, please take out the batteries from the light to avoid battery leakage.
- The headlamp is IPX2 water-resistant. Please DO NOT expose it to the rain.
- Please store the headlamp in a dry environment to extend its service life.
HOW TO OPERATE
- On: While the light is off, single press the button and the light will turn on high white light or constant red light according to the previously memorized mode.
- Change Modes: While the light is on, quickly double-press the button to change between the white light mode and red light mode.
- White Light Mode: While the white light is on, single press the button and the output will cycle between high, medium, low, and OFF.
- Red Light Mode: While the red light is turned on, single press the button and the output will cycle between constant red, flashing red, and OFF.
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight
Read User Manual Online (PDF format)
Loading......