Lupo Dayled 650 Pro LED Fresnels Light User Manual

Lupo Dayled 650 Pro LED Fresnels Light

SAFETY PRECAUTIONS

Do not operate the equipment before studying the instruction manual and the accompanying safety precautions. Make sure that Lupo Safety Instruction is always included with the equipment! Lupo products are intended for professional use. Do not place or use the equipment where it can be exposed to moisture, extreme electromagnetic fields or in areas with flammable gases or dust! Do not expose the equipment to dripping or splashing. Do not place any objects filled with liquids on or near the equipment. Do not expose the equipment to hasty temperature changes in humid conditions as this could lead to condensation water in the unit. Equipment must only be serviced, modified or repaired by authorized and competent service personnel!

CAUTION – BURN HAZARD – HOT PARTS
Do not touch hot parts with bare fingers! LED bulbs and certain metal parts emit strong heat when used! Do not point lamps too close to persons. Always use the fixtures with the front part closed.

NOTICE – EQUIPMENT OVERHEATING RISK
Do not obstruct ventilation by placing filters, diffusing materials, etc. over inlets and outlets of the equipment ventilation or directly over glass cover or LED bulbs.

FINAL DISPOSAL
When no longer in use, this product may not be deposited in the normal household waste but should be brought to a collection point for the recycling of electrical and electronic appliances. The materials are recyclable as marked. By re-use, recycling or another form of usign old appliances you are making an important contribution towards the protection of the environment. Please ask your local authorities for the appropriate disposal point. Equipment contains electrical and electronic components that could be harmful to the environment.

Equipment may be returned to Lupo distributors free of charge for recycling according to WEEE.

Follow local legal requirements for separate disposal of waste, for instance WEEE directive for electrical and electronic equipment on the European market, when product life has ended!

MAINTENANCE AND CARE

Please do not forget that the safe operation of lamp heads also includes their maintenance and care. A visual inspection should be conducted before every use and an inspection of electrical safety should be conducted at least once every 12 months.

WARRANTY

Each Lupo product will be repaired free of charge by Lupo if during a period of 12 months for mechanical components and 12 months for electrical/electronic components from date of purchase its working order is impaired through a manufacturing or material defect. The faulty product should be immediately sent to authorized dealer or Lupo. This warranty is not valid for equipment that has been used improperly, dismantled, modified or repaired by persons not belonging to the Lupo distribution network. It does not cover lamps, lenses or the material entirely or partially made of glass. No responsibilities can be accepted for damage resulting from the unsatisfactory operation of the equipment.

Please contact the dealer who sold the fixture/s before any units are returned for repair. Lupo will make the final determination as to whether or not the unit is covered by warranty. Lupo will replace or repair to proper working condition any products that are returned under warranty. Products repaired or replaced under warranty are under warranty only for the remaining unexpired period of time of the original warranty. Any product unit or part returned to Lupo must be packaged in a suitable manner to ensure the protection of such product unit or parts. The package must be clearly an prominently marked to indicate that the package contains returned product units or parts. All returned product units or parts must be accompanied by a written explanation of the alleged problem or malfunction.

WARNING:

When hanging the fixture from higher position, please make sure you use a safety cable to attach the barndoors to the yoke of the fresnel. Barndoors should always be secured to the yoke when used in this way. Another safety cable should be used to secure the fixture to the mounting pipe or truss. Both safety cables must be properly dimensioned for the fixture and the application when the fixture is operated in hanging position please ensure that the accessories are installed correctly with top latch locked.

Thanks for having purchased Lupo products. All the products are made in Italy and all the efforts have been put to keep the quality standards high. We hope this product can help you in your job and make your life easier as a professional. We also hope you will enjoy its use and we would be happy to receive your feedback about it.

Instructions

• Device for indoor use only.
• Protection standard IP20.
• Maximum ambient temperature: 40 °C.
• Make sure the power supply plug is suitable to power required.
• As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
• To switch on the light push the on/off button.
• Dayled 650 and Dayled 1000 models are equipped with new generation high-quality LED arrays.
• Dayled 650 is equipped with a 60 W single LED array.
• Dayled 1000 is equipped with a 110 W single LED array.
• Dayled 2000 is equipped with a 220 W single LED array.

Package Contents for Dayled PRO

Dayled model + Barndoors

ATTENTION: Please keep the original package of the product in a safe place for warranty reasons.

Package Contents for Movielight 300 PRO

ATTENTION: Please keep the original package of the product in a safe place for warranty reasons.

Accessories

The accessories are products sold separately.

COMPLETE KIT OF V-MOUNT BATTERY POWER SUPPLY FOR DAYLE 650 AND 1000
The items are also sold separately.

Getting Started with the Dayled PRO

Dayled 2000 PRO

Dayled 1000 PRO

Dayled 650 PRO

Getting Started with the Movielight 300

OPERATION MODE

Manual Operation
Press the « OK » 3 buttons to shift between the functions DIMMER, COLOR*, STROBE PAGE, MANUAL and MENU. The indicator shows the selected function.

• DIMMER: Use the down 1 or up 2 buttons to adjust the luminous intensity level from 0 to 100%.
• COLOR: Function available only the Dual Color version. Use the down 1 or up 2 buttons to adjust the color temperature from 2800K to 6500K.
• In the STROBE PAGE, it is possible to set the STROBE frequency by pressing down 1 or up 2

ATTENTION: STROBE frequency = 0 means STROBE effect OFF.

• DMX (ON/OFF):
  • Select DMX SEL by pressing the button.
  • Press down 1 or up 2 to activate the functions.
• MENU (ON/OFF):
  • Select MENU SEL by pressing the 3 buttons.
  • Press down 1 or up 2 to activate the functions.

DMX Operation
Press the OK 3 button to shift between the functions DMX ADDRESS, MANUAL and MENU. The indicator letf

• DMX ADDRESS: Press the « » 1 or « » 2 buttons to select the DMX channel between 1 to 512.
• MANUAL:
  • To return to the MANUAL OPERATION, select MANUAL by pressing the 3 buttons.
  • Press the down1 or up 2 buttons to confirm the selection. shows the selected option.

ADVANCED FEATURES

Long press the « OK » 3 buttons to enter the advanced features menu.

1. Use the 1 or 2 buttons to navigate between the main MENU options: MANUAL / DMX / BLUETOOTH / DEVICE SETTINGS / RESET DEVICE / INFO.
2. Use the 3 buttons to select an option.

Manual Options

1. Use the down1 or up 2 buttons to select between the MONOCOLOR / CCT MODE* and EFFECT MODE.
2. Press the « OK » 3 button to confirm the selection.

The mode name changes according to the Dayled model (monocolor or dual color).

EFFECT MODE:

1. TELEVISION BW only available on dual color version
2. PAPARAZZI / LIGHTINING all versions

Television:
Press the « OK » 3 buttons to shift between DIMMER, RANGE, FREQUENCY, TELEVISION (ON/OFF), and MENU functions. The indicator left shows the selected function.

1. Press down 1 or up 2 buttons to adjust the functions.
   • DIMMER: Use the down 1 or up 2 buttons to adjust the luminous intensity level from 0 to 100%.
   • RANGE: White color range:
   1. 2800 K – 4000 K
   2. 4000 K – 5200 K
   3. 5200 K – 6500 K
   4. 2800 K – 6500 K
   • FREQ: Use the down 1 or up 2 buttons to adjust the frequency from 1 Hz to 25 Hz.
   • TELEVISION (ON/OFF): Select TELEVISION ON by pressing the « » 1 or « » 2 buttons to disable the television effect.
   • MENU (ON/OFF):
   1. Select MENU SEL by pressing the 3 buttons.
   2. Press down 1 or up 2 to activate the functions.

Paparazzi:
Press the « OK » 3 buttons to shift between DIMMER, INT., BULB, PAPARAZZI (ON/OFF), and MENU functions. The indicator « » shows the selected function.

1. Press the Down 1 or up 2 buttons to adjust the functions.

   • DIMMER: Use the Down 1 or Up  2 buttons to adjust the luminous intensity level from 0 to 100%.

   • INT.: Use the Down 1 or Up 2 buttons to adjust the light intensity from 0 to 100%.

   • BULB: Flashbulb type (Flash on duration)

   • PAPARAZZI (ON/OFF):
     Select PAPARAZZI ON by pressing the Down 1 or Up 2 buttons to disable the paparazzi effect.

   • MENU (ON/OFF):

   1. Select MENU SEL by pressing the 3 buttons.
   2. Press Down 1 or Up  2 to activate the functions.

Lightning:
The Lightning effect is applied to the last set of parameters of the CCT or MONOCOLOR mode.

1. Press the « MODE » 3 buttons to shift between DIMMER, CT, INT., LIGHTNING (ON/OFF), and MENU functions. The indicator shows the selected function.

2. Press the Down 1 or Up 2 buttons to adjust the functions.

   • DIMMER: Use the Down 1 or Up 2 buttons to adjust the luminous intensity level from 0 to 100%.

   • CT: Use the Down 1 or Up 2 buttons to adjust the color temperature (CCT) values from 2800K to 6500K.

   • INT.: Use the Down 1 or Up 2 buttons to adjust the light intensity from 0 to 100%.

   • LIGHTNING (ON/OFF):
     Select LIGHTNING ON by pressing the Down 1 or Up 2 buttons to disable the lightning effect.

   • MENU (ON/OFF):

   1. Select MENU SEL by pressing the 3 buttons.
   2. Press Down 1 or Up 2 to activate the functions.

DMX Options

1. Use the Down 1 or up 2 buttons to select between the MONOCOLOR / CCT MODE* and EFFECT MODE / ADVANCED MODE.
2. Press the « OK » 3 buttons to confirm the selection.

The mode name changes according to the Dayled model (monocolor or dual color).

EFFECT MODE:
Press the « OK » 3 buttons to select the EFFECT.

1. Use the Down 1 or Up 2 buttons to select between DMX OPERATION / DMX BIT / DMX SIGNAL LOSS.
2. Press the « OK » 3 buttons to confirm the selection.

DMX BIT: Resolution of the DMX control.

1. Press the « OK » 3 buttons to enter to the DMX BIT options.
2. Use the Down 1 or Up 2 buttons to select between 8bit or 16bit.
3. Press the « OK » 3 buttons to confirm the selected setting. See protocol DMX.

8bit: 1 channel per function. 16-bit: 2 channels per function.

DMX SIGNAL LOSS:
This allows choosing the device’s behavior in case of a DMX signal loss.

1. 1. Select the DMX SIGNAL LOSS item with the 3 buttons.
   2. Use the Down 1 or Up 2 buttons to select the device’s behavior between BLACKOUT/SETTINGS LAST/ SETTINGS 1min.
   3. Press the « OK » 3 buttons to confirm the setting.

Blackout:
The device switches off. Settings Last: The values of the last selected setting are maintained over time until the device is switched off. Settings 1min: The values of the last selected settings will be maintained for one minute and then the device will switch off.

1. Press the « OK » 3 buttons to enter the DEVICE SETTINGS options.
2. Use the Down 1 or Up 2 buttons to select between DISPLAY / FILTER / LINEARIZATION.
3. Press the « OK » 3 buttons to confirm the selection.
4. Within each function select the option to be activated, use the Down 1 or Up 2 buttons to select one between the options, and press the « OK » 3 buttons to activate it.

DMX Protocol

DMX Channel Protocol – 8 bit

MODE| CHANNELS| DMX CHANNEL POSITION| DMX VALUE| VALUE

CCT

| ****

3

| 1. DIMMER| 0 – 255| 0 ÷ 100 %
2. COLOR TEMPERATURE *| 0 – 255| 6500 – 2700
4. STROBE **| 0 ÷ 10| strobe off
11 ÷ 255| freq. strobe 1 ÷ 24

TELEVISION*

| ****

3

| 1. DIMMER| 0 – 255| 0 ÷ 100 %
2. WHITE RANGE| 0 – 255| 1 ÷ 4
3. FREQUENCY| 0 – 255| 4 ÷ 24

PAPARAZZI*

| ****

3

| 1. DIMMER| 0 – 255| 0 ÷ 100 %
2. INTERVAL| 0 – 255| 1 ÷ 10 %
3. BULB TYPE| 0 – 255| 0 ÷ 2

LIGHTNING*

| ****

3

| 1. DIMMER| 0 – 255| 0 ÷ 100 %
2. COLOR TEMPERATURE| 0 – 255| 6500 – 2700
3. INTERVAL| 0 ÷ 255| 1 ÷ 20
DMX Channel Protocol – 16 bit

MODE| CHANNELS| DMX CHANNEL POSITION| DMX VALUE| VALUE
| | 1. DIMMER – byte 1| 0 – 65535| 0 ÷ 100 %

CCT

| ****

6

| 2. DIMMER – byte 2
3. COLOR TEMPERATURE – byte 1| 0 – 65535| 6500 – 2700
4. COLOR TEMPERATURE – byte 2
| | 5. STROBE – byte 1 | 0 ÷ 2620| strobe off
| | 6. STROBE – byte 2 | 2621 ÷ 65535| -1,00 ÷ + 1,00

TELEVISION *

| ****

6

| 1. DIMMER – byte 1| 0 – 65535| 0 ÷ 100 %
2. DIMMER – byte 2
3. WHITE RANGE – byte 1| 0 – 65535| 1 ÷ 4
4. WHITE RANGE – byte 2
5. FREQUENCY – byte 1| 0 – 65535| 4 ÷ 24
6. FREQUENCY – byte 2

PAPARAZZI*

| ****

6

| 1. DIMMER – byte 1| 0 – 65535| 0 ÷ 100 %
2. DIMMER – byte 2
3. INTERVAL – byte 1| 0 – 65535| 1 ÷ 10 %
4. INTERVAL – byte 2
5. BULB TYPE – byte 1| 0 – 65535| 0 ÷ 2
6. BULB TYPE – byte 2

LIGHTNING*

| ****

6

| 1. DIMMER – byte 1| 0 – 65535| 0 ÷ 100 %
2. DIMMER – byte 2
3. COLOR TEMPERATURE – byte 1| 0 – 65535| 6500 – 2700
4. COLOR TEMPERATURE – byte 2
5. INTERVAL – byte 1| 0 ÷ 65535| 1 ÷ 20
6. INTERVAL – byte 2

• Channel in use only the Dual Color version.
• Only available if enabled in DMX ADVANCED.

Device Settings

• Display: 30sec/1min/ALWAYS ON. Time during which the display backlight stays on.
• Menù View: Type the main MENU, sub-menus and functions to show. ONLY MANUAL / ONLY DMX / MANUAL/DMX.
• Frequency: Dimmer frequency 18 KHz – 25 KHz
• Filter: FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED. It is the speed response of the system (smooth factor).
• Linearization: LINEAR / EXPONENTIAL / LOGARITHMIC. Linearization is the compensation curve for the human eye’s perception of the luminous intensity emitted as a function of the required power (required power = dimmer value on the display).
  • Linear: No compensation, the intensity of the light is directly proportional to the requested power
  • Exponential: The light intensity increases from 0 to 100 exponentially.
  • Logarithmic: The light intensity increases from 0 to 100 logarithmically.
• CCT Limit: CCT range 2800 – 6500 or 3200 – 5600

Reset Device

1. To set the factory settings, select YES by pressing the 2 buttons.
2. Press « OK » 3 to confirm the selection.
3. The device will ask for further confirmation, select YES by pressing the 2 buttons.
4. Press « OK » 3 to confirm the selection.

FACTORY SETTINGS:

Mode:
CCT or MONOCOLOR – DMX: Off – Bit: 8bit – DMX signal loss: Settings 1 Min – Display: 1 Min – Filter: Normal Speed – Linearization: Linear

FACTORY DEFAULT SETTING

FACTORY DEFAULT SETTING

MANUAL OPERATION| DEVICE SETTINGS
MODE: CCT| DISPLAY: 1 min
| MENU VIEW : Manual/DMX
DMX OPERATION| FILTER : Normal speed
MODE: CCT| LINEARIZATION: Linear
BIT: 8 BIT| CCT LIMIT: 2800K – 10000K
DMX SIGNAL LOSS: Settings 1 MIN| FREQUENCY: 18 KHz
RDM ENABLE: OFF| BLUETOOTH
INV-CCT: OFF| Bluetooth Active: OFF

Advanced Features Menu e Sub – Menus

• Select “EXIT” with the « OK » 3 buttons to return to the last selected mode.
• Select “BACK” with the « OK » 3 buttons to return to the previous menu.

RDM Protocol Specification

Manufacturer ID

|

0x0622

| Manufacturer identification number (LUPO Lighting).
Device Identification
Model ID| | Model identification number
| 0x0000| Dayled 650 mono color
| 0x0001| Dayled 650 dual color
| 0x0002| Dayled 1000 mono color
| 0x0003| Dayled 1000 dual color
| 0x0004| Dayled 2000 mono color
| 0x0005| Dayled 2000 dual color
| 0x0006| Superpanel 30 dual color soft
| 0x0007| Superpanel 30 dual color lens
| 0x0008| Superpanel 30 fullcolor soft
| 0x0009| Superpanel 30 fullcolor lens
| 0x0010| Superpanel 60 dual color soft
| 0x0011| Superpanel 60 dual color lens
| 0x0012| Superpanel 60 fullcolor soft
| 0x0013| Superpanel 60 fullcolor lens
| 0x0014| Actionpanel dual color soft
| 0x0015| Actionpanel dual color lens
| 0x0016| Actionpanel fullcolor soft
| 0x0017| Actionpanel fullcolor lens
| 0x0018| Kickasspanel dual color
| 0x0019| Kickasspanel fullcolor
| 0x0020| Lupoled monocolor
| 0x0021| Lupoled dualcolor
Personality| | DMX Personality
| 0x01| CCT
| 0x0A| TELEVISION BW
| 0x0C| PAPARAZZI
| 0x0D| LIGHTNING
Network management
DISC UNIQUE BRANCH| 0x0001| Search RDM devices
DISC MUTE| 0x0002| Mute RDM device, no response message
DISC UN MUTE| 0x0003| Activate RDM device fo response message
Status collection
QUEUED MESAGES| 0x0020| Retrieves queued messages or status message if no message is in queue
STATUS MESSAGES| 0x0030| Retrieves current Warning/Error messages
RDM Information

SUPPORTED PARAMETERS| 0x0050| Retrieves a list of all supported RDM commands
PARAMETER DESCRIPTION| 0x0051| Retrieves a list of all RDM commands
Product Information
DEVICE INFO| 0x0060| Retrieves a variety of information about the device that is normally required by a controller.
DEVICE MODEL DESCRIPTION| 0x0080| Text description of up to 32 characters for the device model type.
MANUFACTURER LABEL|

0x0081

| This parameter provides an ASCII text response with the Manufacturer name for the device. “LUPO” is the default name.
FACTORY DEFAULTS| 0x0090| Set the device to its factory defaults. Get: Check if settings still in default state -> 1 if

default

SOFTWARE VERSION LABEL| 0x00C0| Retrieves software version string of main software
DMX512 Setup
DMX PERSONALITY| 0x00E0| DMX mode
DMX PERSONALITY DESCRIPTION| 0x00E1| Shows a description of a DMX-Mode, max 32 characters
DMX START ADDRESS| 0x00F0| DMX address
Control
IDENTIFY DEVICE| 0x1000| The identify flag (flashes the light)
Manufacturer Commands
FAN MODE| 0x8001| 0: Off 1: On
DISPLAY TIMEOUT| 0x8002| 0: 30 sec 1: 1 min 2: always on
DMX SIGNAL LOST MODE| 0x8003| 0: black out 1: last settings on 2: last settings 1 min
DMX BITS| 0x8004| 0: 8 bit 1: 16 bit
CCT LIMIT| 0x8005| 0: 2800-10000 1: 3200-5600
LINEARIZATION| 0x8006| 0: linear 1: exponential 2: logarithmic
FILTER| 0x8007| 0: full speed 1: normal speed 2: high speed 3: low speed
FREQUENCY| 0x8008| 0: 18 KHz 1: 25 KHz
INV – CCT| 0x8009| 0: not inverted 1: inverted

Lupo srl – Via V. Sassi 28/30 Collegno (TO) – 10093 – Italy
Phone: +39 011 411 9919 / e-mail: contact@lupo.it / website: www.lupo.it.

References

• Lupo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>