SWISS PEAK P329.451 Wireless Headphone User Manual
- June 3, 2024
- SWISS PEAK
Table of Contents
SWISS PEAK WIRELESS
HEADPHONE V3
P329.451 Wireless Headphone
- Power on/off, Pause/Play, Pick up/End call.
- Volume+ / Next Track
- Volume-/ Previous Track
- MIC
- AUX in port
- Micro USB port
- LED indicator light (BT)
SPECIFICATION:
| Battery capacity | 300mAh |
|---|---|
| BT version | 5.0 |
| Pairing name | “Swiss Peak” |
| Charging time | 1.5 hours |
| Playing time | 16 hours |
| Speaker driver | 40mm |
| S/N Ratio | ≥90dB |
| requency range | 20Hz-20KHZ |
| Operation range | 10M |
CHARGING:
- Connect the charger to the charging port.
- While charging the LED indicator will be solid red. When fully charged the LED indicator will turn blue.
PAIRING:
- Turn on the headphones by pressing and holding down the phone button on the headphones for three seconds
- The device’s LED indicator will illuminate. The LED indicator light will blink between red and blue when it is in pairing mode.
- On the mobile device (smartphone/tablet) turn on the BT connection.
- Select “Swiss Peak” in the available Wireless devices on your mobile device.
To reconnect:
Simply turn on the headphones and have BT turned on your mobile device and the
headphones will automatically reconnect.
FAQ:
How far will the Bluetooth headphones work from the paired device?
– The Bluetooth will stay connected to the paired device up to 30ft/10M
– Headphones will not connect to phone: Be sure the headphones and phone are
in pairing mode
– No sound on headphones: Make sure the headphones are properly paired and
connected to the phone and be sure you are within the 30ft/10M distance
– Headphones will not start: Make sure the headphone is charged
NOTICE:
- Keep the product dry; do not place the product in damp places
- Keep out of direct sunlight and high temperatures High temperatures may result in damage
- Keep out of cold temperatures, this will help avoid internal damage
- Do not disassemble the product
- Avoid dropping the headphones
- Do not continue to charge the headphones over 10 hours
- When charging use the Micro USB charging cord that came with the headphones.
EU Declaration of Conformity
Xindao B.V. hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Derective 2014/53/EU.
The complete Declaration of Conformity can be found at
www.xindao.com > search on item number.
P329.451
www.swiss-peak.comm