Midea MA100W75 7.5kg Top Load Fully Auto Washing Machine Owner’s Manual

: June 3, 2024
: Midea

Table of Contents

MA100W75 7.5kg Top Load Fully Auto Washing Machine
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MA100W75 7.5kg Top Load Fully Auto Washing Machine

MODEL MA100W75 Series MA100W85 Series MA100W95 Series

CONTENTS

SAFETY INSTRUCTIONS

Safety instructions ………………………………………………..

2

INSTALLATION

Product description ……………………………………………

8

Installation area ……………………………………………………..

9

Unpacking the washing machine ……………….

9

Levelling the washing machine ……………………..

10

Selection of tap ………………………………………………………

1 1

Connection of inlet hose, tap and washing machine…

1 1

OPERATIONS

Preparation before washing……………………………..

12

Washing ………………………………………………………………………

12

After washing……………………………………………………………

12

Washing matters needing attention ………….

13

The usage of detergent and washing powder………….

13

Control panel ……………………………………………………………

14

Option……………………………………………………………………………

15

Personalized setting of washing program………

16

Operations of washing process……………………..

16

Washing program table ……………………………………..

17

MAINTENANCE

Cleaning and care …………………………………………………

18

Cleaning the cabinet…………………………………………….

18

Cleaning drain pump filter ……………………………….

19

Troubleshooting……………………………………………………..

20

Technical information ………………………………………….

2 1

Energy efficiency test program…………………….

22

1

SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. · This appliance is not intended for use by persons(including
children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. · Children should be supervised to ensure that they do not play with the appliance. · If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. · The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. · The openings must not be obstructed by a carpet. · This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – areas for communal use in blocks of flats or in launderettes.
2

MA100W75 Series MA100W85 Series MA100W95 Series

SAFETY INSTRUCTIONS
Warning! The electric shock! · This appliance is for indoor use only. · Do not put washing machine at humid place. · Hands shall not be inserted into running spin-dry tub . · If the spin-dry tub does not stop within 15 seconds after opening the cover , please stop using the machine and have it repaired. · Before any maintenance the device, unplug the appliance from the mains. · Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals. · To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed. · Make sure that the water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.
4

SAFETY INSTRUCTIONS
Risk to children!
· EN countries: the appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
· Animals and children may climb into the machine. Check the machine before every operation.
· Young children should be supervised that they do not play with the appliance.
· Machine may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.
· Remove all packages before using the appliance. Otherwise, serious damage may result.
· The washing machine with single inlet valve only can be connected to the cold water supply. The product with double inlet valves should be correctly connected to the hot water and cold water supply.
· Plug must be accessible after installation.
Risk of explosion!
· Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in fire or explosion.
· Before hand thoroughly rinse items of washing by hand.
5

SAFETY INSTRUCTIONS
Caution
Installing the product!
· This washing machine is for indoor use only. · It isn’t intended to be built-in using. · The openings must not be obstructed by a carpet. · Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive or caustic gases. · Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. · The washing machine with single inlet valve only can be connected to the cold water supply. The product with double inlet valves should be correctly connected to the hot water and cold water supply. · Plug must be accessible after installation.
Risk of damaging appliance!
· Your product is only for home use and is only designed for the textiles suitable for machine washing.
· Do not climb up and sit on top cover of the machine. · Do not lean against machine door. · Cautions during Handling Machine:
1.Transport bolts shall be reinstalled to the machine by a specialized person.
2.The accumulated water shall be drained out of the machine.
3.Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance.
4.This appliance is heavy. Transport with care.
6

SAFETY INSTRUCTIONS
· Please do not close the door with excessive forces. · It is forbidden to wash carpets.
Operating the appliance!
· Before washing the clothes at first time, the product shall be operated in one round of the whole procedures without the clothes inside.
· Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as detergents. Please only select the detergents suitable for machine washing, especially for drum.
· Make sure that all pockets are emptied. Sharp and rigid items such as coin, brooch, nail, screw or stone etc. may cause serious damages to this machine.
· Please check whether the water inside the drum has been drained before opening its door.Please do not open the door if there is any water visible.
· Be careful of burning when the product drains hot washing water.
· Never refill the water by hand during washing. · After the program is completed, Please wait for two
minutes to open the door.
Packaging/Old appliance
This marking indicates that this product should not be disposed
with other household wastes throughout the EU.To prevent
possible harm to the environment or human health from
uncontrolled waste disposal,recycle it responsibly to promote
the sustainable reuse of material resources.To return your used device,please use the collection systems or contact the retailer
where the product was purchased. They return and can take this
product for environmental safe recycling.
7

INSTALLATION
Product description
Top lid
Frame Control panel
Cabinet

Water inlet valve Power case and plug
Handle

Adjustable foot knob

Or
Drain hose

Note!
· The product line chart is for reference only, please refer to real product as standard.

Accessories

Or

Inlet hose ass cabinet baseboard manual

screw spring clamper drain loose ass

Note!
· Note: if the drain hose is already installed on the machine, then there is no spring clamper and drain hose in the accessories.

8

INSTALLATION

Installation area

Warning!
· Stability is important to prevent the product from wandering!
· Make sure that the product should not stand on the power cord.
Before installing the machine, the location characterized as follows shall be selected: 1.Rigid, dry, and level surface 2.Avoid direct sunlight 3.Sufficient ventilation 4.Room temperature is above 0 C 5.Keep far away from the heat resources such as coal or gas.

w

W> 20mm

Unpacking the washing machine

Warning!
· Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
· There is a risk of suffocation ! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing. 2. Lift the washing machine and remove the base packing. 3. Remove the tape securing the power supply cord and
drain hose. 4. Remove the inlet hose from the drum.

The installation of drain hose

Drain hose inserted into the drain

Clamping spring

9

INSTALLATION
Warning!
· Do not kink or protract the drain hose. · Position drain hose properly ,otherwise damage might result of water leakage. · If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
There are two ways to place the end of drain hose: 1.For lower drain system

Under3m

Under 15cm

2.For upper drain system

Trough Hose Retainer

Bind

water trough

Min.86cm Max.100cm
Min.86cm Max.100cm

Levelling the washing machine

Warning!
· The lock nuts on all four feet must be screwed tightly against the housing.

1.Check if the legs are closely attached to the cabinet. If not, please turn them to Lock nut

their original positions tighten the nuts.

2.Check alignment of the product with a

spirit level and if required, correct.

3.Loosen the lock nut and turn the feet loosen

until it closely contacts with the floor.

Raise

4.After being locked properly, press four

corners again to make sure that they has

been adjusted properly.

foot
lock Lower

right wrong

190

INSTALLATION
Selection of tap
Please select appropriate tap.

Ordinary faucet

Screw tap Special washing

machine tap

Connection of inlet hose, tap and washing machine

1:Connection between ordinary tap and inlet hose.

Wall

tap

clamp nut

1.Loosen clamp nut to 2.Loosen four bolts 3.Set connecting base 4.Tighten clamp nut

show 5mm thread

on tap and tighten

bolts evenly

slide bushing

inlet hose inlet valve

5.Press slide bushing, 6.connection finished 7.After connection and installation,

insert inlet hose into

check if there is water leakage

connecting base

2:connection between screw tap and inlet hose.

tap with threads and inlet hose

special tap for washing machine

Warning!

· To prevent leakage or water damage, follow the instructions in this chapter! · Do not kink, crush, modify or sever water inlet hose.

1110

OPERATIONS

Preparation before washing

Caution!
· Before washing, please make sure it’s installed properly. · Before washing it at first time, the washing machine shall be operated in one
round of the whole procedures without clothes in as follows.

1

2

3

4

Plug in

Open tap Load and Close door Add detergent

Washing

1

2

3

4

Power On Select Programme Select Level

Start up

Note!

· If default is selected, step 2, 3 can be skipped.

After washing
Buzzer will beep after washing finished and the power supply will be cut off automatically. Then unload the laundry.

1120

OPERATIONS
Washing matters needing attention
· The working condition of the washer should be(0-40).If used under 0,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
· Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label

Take out the items out of the pockets

Knot the long strips,zip or button

Put small clothes into the pillow slip

Turn easy-pilling and long-pile fabric inside out

Separate clothes with different textures

Warning!
· When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.
· Don’t washing the clothes touching with kerosene, gasoline, alcohol and other flammable materials.

The usage of detergent and washing powder
· As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water.
· Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.

1130

OPERATIONS
Control panel

End

3

5

4

2

1

Note!
· The chart is for reference only, Please refer to real product as standard.

11 On/Off Product is switched on or off.

21 Start/Pause Press the button to start or pause the
washing cycle.

3 Program Available according to the laundry type.

4 Option This allows you to select an additional function and will light when selected.

5 Display The display shows the settings, estimated time remaining, options, and status messages
for your washer. The display will remain on through the cycle.
When LED flashing ,it means the time that delay to start the machine. When LED lighting ,it means the program time that remaining.

1140

OPERATIONS
Option
Only for washers having these function. Water level select water level according to clothing categories, degree of soiling and washing habits of customers
Delay 1. Select a program 2.Press the Delay button to choose the time 3.Press [Start/Pause] to commence the delay operation

Delay

On

Choose the Program

Setting time

Start

Press the [Delay] button until the Delay light is off . It should be pressed before starting the program. If the program already started, should press the [On/Off]

button to reset the program.

Caution!

· If there is any break in the power supply while the machine is operating, a special memory stores the selected program and when the power is restarted.

15

OPERATIONS
Personalized setting of washing program
Customers can select washing program according to actual demand, and set water volume and appointment time

On

Program

Water Level

Delay

Start

Operations of washing process

One Touch Smart Wash

On

Start

Spin only

On

Program keep pressing Program key until

Start

disply

Note!
Note: other process combinations are just like above.

16

OPERATIONS

Washing program table

Program are available according to the laundry type. Only for washers having these function
Program

Quick

Suitable to wash light stained clothes and clothes in summer.

Soft: Normal

the tempo is soft, slow washing and spinning speed, to make the lightest wear and deformation. Standard fabric washing program, suitable to wash ramie cotton fabric. Wash for once, rinsing for twice, the spin time is a little long.

Hygiene This program is able to effectively remove mites in clothes.

Soak

Select this program if clothes need to be soaked before washing.

Spin only Select this program to Spin and drain only .

1170

MAINTENANCE

Cleaning and care
Warning!
· Before your maintenance starts, please unplug the machine and close the tap.
Cleaning the cabinet
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed.
Note!
· Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products,etc.
Cleaning the inlet filter
Note!
· Inlet filter must be cleaned if there is less water.

Washing the filter in washing machine: 1.Screw off the inlet pipe from the backside
of the machine. 2.Pull out the filter with long nose pliers

and reinstall it back after being washed.

3.Use the brush to clean the filter.

4.Reconnect the inlet pipe.

magic filter

Lint filter clean

1.There is a built-in lint filter in your washer. It

can help to collect lint during washing cycle.

2.It is suggested to clean the lint filter every

10 cycles.

normal filter

3.Take it out and clean the filter with water.

Then place it back into the washer.

1180

MAINTENANCE

Cleaning drain pump filter
Only for washers having these function.
Warning!
· Be careful of the hot water! · Allow detergent solution to cool down. · Unplug the machine to avoid electrical shock before washing. · Drain pump filter can filter the yarns and small foreign matters from the
washing. · Clean the filter periodically to ensure the normal operation of washing
machine.

1

2

3

Drain the water out of the pump, under which use a container to collect.
4

Open the filter by turning to the counter clockwise
5

Remove extraneous matter
6

Clean the filter.

Restore it and adjust the convex place to align at the pump hole.

Tighten the pump cover clockwise.

Caution!
· Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak;
· When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

1190

MAINTENANCE

Trouble shooting

The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre.

Description

Inspection Items

No washing No water flows in

If the power is off or the fuse is burned out. If the power supply voltage is too low. If the water amount reaches to the required water level.(The washer will not work if the water amount does not reach the required water level) If it is set to “Delay” washing mode. (It will only start to work until the reservation time reached)
If the power is off or the fuse is burned out. If the water supply is cut off or the water pressure is too low. If the inlet hose is properly connected and the water tap is opened. If the filtering screen of inlet valve is blocked by dirt. If the coil of inlet valve is damaged. (The slight electromagnetic sound is normal phenomenon when the inlet valve is switched on) If the “Start / Pause” button is pressed after the power switch is pressed.

If the water drain hose is placed very high. Abnormal draining If the end of water drain hose is sealed in pond.
If the internal rubber ring of drain valve is blocked by dirt.

Abnormal spin

If the door lid is closed. If all clothing piled largely at one side of barrel or the clothing is excessively
placed. If the washer is not placed in stable condition or it is placed in inclination
state. (The ground is not flat). If the motor belt is loosened.

Description

Reason

Solution

E1

Alarm for abnormal water intaking.

Check the water tap is opened or not.

E2

Alarm for water drain has not finished.

Check the water level sensor and drain pump.

E3

Alarm for lid not closed before wash and spin.

Close the lid, Press “Start” button

E4

Alarm for washing stay Manually balance clothes

at one side.

in the barrel by hands.

EXX

Others

Please try again first, call up service line if there are still troubles

Note!
· After the check, activate the appliance. If the problem occurs or the display shows other alarm codes again, contact the service.

2100

MA100W75 Series MA100W85 Series MA100W95 Series

MAINTENANCE
Energy efficiency test program:
Entry mode of energy efficiency program in Malaysia 1:Press the “ON/OFF” button 2:Press the “program” button, to select the” Normal “program (display P1), and press
the water level key to set the level 8 (display L8) 3:Press the “start “button to start the operation Entry mode of water consumption procedure in Singapore 1:Press the “ON/OFF” button 2:Press the “program” button, to select the “Quick” program (display P2), 3:Press the “start “button to start the operation
Note!
· Do not operate operations not mentioned in the above steps
21420

QUESTIONS OR COMMENTS

Country

Contact Center

Thailand

+6621077799

Myanmar

+09260367229

Cambodia Vietnam

+85523212435 +1800588863

Philippines Indonesian

+63288635522 +628001888523

Malaysia Singapore