LA CROSSE TECHNOLOGY 433-3841MV5 15.75-Inch Margaritaville Indoor and Outdoor Wall Clocks Instruction Manual
- June 4, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
LA CROSSE TECHNOLOGY 433-3841MV5 15.75-Inch Margaritaville Indoor and
Outdoor Wall Clocks
WARRANTY & SUPPORT
This product is warranted to be free from defects in material and workmanship
under normal use and service for a period of two years from the date of sale
to the customer. Warranty will not apply to defects resulting from abuse,
accidents, or misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock (postage prepaid) with
proof of purchase showing the date the clock was purchased to the following
address and such defects will be repaired, or the products will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company Warranty Department 2830 South 26th Street. La Crosse,
WI 54601 For Online support visit:
www.lacrossetechnology.com/support
WARNING: This product can expose you to chemicals including styrene,
which is known in the State of California to cause cancer. For more
information go to: https://www.p65warnings.ca.gov/ Made in China – Printed
in China
REMOVE COVER FROM MOVEMENT
- Open: Pull up on the square cover to access the battery compartment.
- Close: Replace the cover over the movement and press down.
POWER UP
- Insert 1 fresh AA alkaline battery, according to polarity, into the snug Battery Compartment.
- Rotate the Time Set Wheel to set the time.
- Mount on a wall and enjoy!
Note: The quartz movement will keep the clock running accurately. If the clock does not operate, or steadily loses time, replace the battery. Learn more from our video: bit.ly/wallclock.setup
MOUNTING
- Be sure the Cover is in the closed position.
- Use the top Hanger Hole to mount the clock.
SPECIFICATIONS
- Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the Battery Compartment (Alkaline recommended)
- Battery Life: 12 months
CARE & MAINTENANCE
- Always purchase the correct size and grade of battery most suitable for intended use.
- Clean the battery contacts and also those of your clock prior to battery installation.
- Ensure the battery is installed with correct polarity (+ and -).
- Remove battery from equipment when it is not used for an extended period of time.
- Promptly remove an expired battery.
- The specifications for this wall clock may change without prior notice.
- Improper use or unauthorized opening of movement or clock housing will void any warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>