netvue Light Up Every Spot 1080p Spotlight Cam User Guide

Table of Contents

netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-PRODUCT-
IMG

$netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $1$$

$netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $5$$ $netvue-Light-Up-Every-Spot-1080p- Spotlight-Cam-fig- $6$$

Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except for the operations of law enforcement ofﬁcers conducted under lawful authority, no person shall use, either directly or indirectly, a device operated pursuant to the provision of this part for the purpose of overhearing or recording the private conversations of other unless such use is authorized by all of the parties engaging in the conversation.

FCC ID 2AO8RNI-7221

CE RED
This product can be used across EU member states.

Spotlight Cam comes with a built-in card slot which supports up to 128GB Micro SD card.

Step 1: Pull the cover off.
Step 2: Insert the Micro SD card. Make sure you insert it in the correct direction.
Step 3: Finally push back the cover.

Attach the provided antenna counterclockwise to the Spotlight camera.

Read Before Installation

Keep Spotlight Cam and all accessories out of reach of children and
Please note that the Spotlight Cam is 5V input, Please use the power adapter (100V~240V) included in the
Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-95%
Please do not expose the camera lens to direct

Note:

Spotlight Cam only works with 4GHz Wi-Fi.
Strong lights may interfere with the device’s ability to scan QR
Avoid placing the device behind furniture or near Try to keep it within range of your Wi-Fi signal.

Download Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process

Set Up With Netvue App

Download Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.

Installation

Check the following things before you drill holes on your wall:

Spotlight Cam has been successfully added to your Netvue App and is able to stream video.
Have planned the cable Measured the length of the power cable and Ethernet cable (if you plan to use Ethernet connection) you will need. $netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $10$$

Step 1:

Find a good installation spot.

Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64″, 6mm) to drill three holes.
Install anchors to fix the screws.
Tighten the provided screws to secure the camera. $netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $11$$ $netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $12$$

Step 2:

Use the provided drilling template to mark the position of holes on your Use drill bit (15/64″, 6mm) to drill three holes.
Install anchors to ﬁx the
Tighten the provided screws to secure the $netvue-Light-Up-Every-Spot-1080p-Spotlight-Cam-fig- $13$$