netvue NI-3341 Home Cam 2 Security Indoor Camera User Guide
- June 6, 2024
- netvue
Table of Contents
Home Cam 2 Quick Guide
Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except
IRUWKHRSHUDWLRQVRIODZHQIRUFHPHQWRIFHUVFRQGXFWHG under lawful authority, no
person shall use, either directly or indirectly, a device operated pursuant to
the provision of this part for the purpose of overhearing or recording the
private conversations of other unless such use is authorized by all of the
parties engaging in the conversation.
FCC ID 2AO8RNI-3341
CE RED
This product can be used across EU member states.
What’s In The Box
Camera Structure
Read Before Installing
- Keep Home Cam 2 and all accessories out of reach of children and pets.
- Home Cam 2 comes with a power adapter. If you prefer other power adapters, please make sure that they allow a DC5V power supply voltage, and an electric current not less than 1A .
- Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-95%
- Please do not expose the camera lens to direct sunlight.
Note:
- Netvue Home Cam 2 only works with 2.4GHz Wi-Fi.
- Strong lights may interfere with the device’s ability to scan QR code.
- Avoid placing the device behind furniture or near microwaves. Try to keep it within range of your Wi-Fi signal.
Set Up With Netvue App
Download Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Mount Your Home Cam 2
Put your Home Cam 2 just anywhere you want-on the wall, under the ceiling, or directly on the desktop.
With the magnetic base, Home Cam 2 can be attached to the surface of any iron, nickel, cobalt-containing object, such as refrigerator,
Install on the Wall
-
Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64″, 6mm) to drill two holes, and then install anchors to hold screws.
-
Install the Mounting Bracket on your wall with the Screws provided.
-
Point the hole at the bottom to the nail and turn it counterclockwise.
-
Now it is all set, you could rotate it 100 degrees up and down.
Netvue Protect Plan
Netvue Protect Plan provides optional advanced features for those with higher security needs, and each plan supports multiple devices.
https://my.netvue.com/home/index.html#/en/protect_plans
Continuous Video Recording Event Video Recording Human Detection …
Visit my.netvue.com to learn more.
Feel free to contact us for additional help
| support@netvue.com
---|---
| Netvue Forum
| in-App Chat
| @NetvueTech
| 1(866)749-0567
https://my.netvue.com/home/index.html#/en/protect_plans
Netvue Web Client
www.netvue.com
240 W Whitter Blvd Ste A, La Habra, CA 90631
© 2010-2021 NETVUE, INC
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device and its
antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>