netvue Orb Mini CAmera User Guide
- June 5, 2024
- netvue
Table of Contents
netvue Orb Mini CAmera
Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except for the operations of
law enforcement officers conducted under lawful authority, no person shall use,
either directly or indirectly, a device operated pursuant to the provision of
this part for the purpose of overhearing or recording the private
conversations of other unless such use is authorized by all of the parties
engaging in the conversa-tion. FCC ID 2AO8RNI-3421CE RED This product can be
used across EU member states.
What’s In The Box
Camera Structure
Read Before Installing
- Keep Orb Cam Mini and all accessories out of reach of children and pets.
- Orb Cam Mini comes with a power adapter. If you prefer other power adapters, please make sure that they allow a DC5V power supply voltage.
- Working temperature: -10°C to 50°C (14°F to 122°F) Working relative humidity: 0-95%
- Please do not expose the camera lens to direct sunlight.
Note:
- Netvue Orb Cam Mini only works with 2.4GHz Wi-Fi.
- Strong lights may interfere with the device’s ability to scan QR code.
- Avoid placing the device behind furniture or near microwaves. Try to keep it within range of your Wi-Fi signal.
Set Up With Netvue App
Download the Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Installation
If you are going to install camera on wood, just skip this step. If you are going to intall camera on concrete or brick:
Step 1: Use the provided drilling template to mark the position of holes on your wall. Use drill bit (15/64″, 6mm) to drill two holes, and then install anchors to hold screws.
Step 2: Install the Mounting Bracket with the Screws provided. And then place the Hex Bolt into the Mounting Bracket.
Step 3: Tighten the Orb Cam clockwise to the Hex Bolt.
Step 4: Now you can turn around your Orb Mini horizontally and vertically using Netvue App.
Netvue Protect Plan
Netvue Protect Plan provides optional advanced features for those with higher security needs, and each plan supports multiple devices.
my.netvue.com
Continuous Video Recording Event Video Recording Human Detection Visit
my.netvue.com to learn more.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>