Govee H6058 StarPal Pro Table Lamp User Manual

June 6, 2024
Govee

Govee H6058 StarPal Pro Table Lamp User Manual
Govee H6058 StarPal Pro Table Lamp

Safety Instructions

Read and follow all the safety instructions:

  • The lamp is not waterproof. Avoid exposing it to splashing or dripping water.

  • The operating temperature should be within -10° to 45°C (14° to 113°F).

  • The lamp’s internal light source cannot be replaced. If it breaks, you must
    replace the entire lamp.

  • Do not install the lamp with a dimming driver.

  • Do not place the lamp near the heat source or expose it to the sunlight for a long time.

  • Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).

  • Avoid charging the product in environments lower than 32 ℉(0 ℃ )or higher than 113 ℉(45 ℃).Avoid using the product in environments below -4 ℉(-20 ℃)or above 140 ℉(60 ℃)

Introduction

Thanks for choosing the Govee StarPal Pro Table Lamp. This lamp emits warm and smooth white lighting, and you can also apply over 16M RGB lighting effects via connecting to the Govee Home app.

What You Get

Table Lamp

| 1
---|---
Adapter|

1

User Manual

| 1
Service Card|

1

At a Glance

Product Overview

Control Button Power On: Press and hold for 3s

Power Off: Press and hold for 10s (the light will flash with blue twice)
Sleep Mode: Press and hold for 2s
Awake: Press once in Sleep mode
Color Switch: Press to switch from different color

Installing Your Device

  1. Connect the adapter to the lamp via the DC charging port;
  2. Power on the adapter (the lamp is available to use during charging)
    Installing Your Device

Pairing Your Device with the Govee Home App

What you need:

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Turn on the Bluetooth in your smartphone.
  3. Open the app, tap “+” icon in the top right corner and search “H6058”
  4. Tap the device icon and follow the on-screen instructions to complete pairing.

Specifications

Working Voltage

|

AC 100-240V

---|---

Input

| 12V/1A
Lumen|

350lm

Color

| RGBWW
Color Temperature|

2200K-6500K

Battery Capacity

| 3350mAh
Regular Battery Life|

4 hrs

  Charging Duration

| 4 hrs
Working Temperature|

-10° to 45°C (14° to 113°F)

Troubleshooting

  1. Cannot connect to the Govee Home app.

    • Check if the device is powered on.
    • Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
    • When connecting for the first time, ensure the smartphone is near the device
    • If the connection error still exists, please delete the connected device from “My Devices” on the app. Reconnect to the Govee Home app by following the instructions provided previously.
  2. How long will the battery last after fully charged?

    • When powered by the battery, the lamp will automatically turn on energy saving mode for better battery life.
    • With the warm white lighting, the battery can last for 4 to 5 hours. It can last longer with colored lighting.
  3. How to check the battery status of the lamp?

    • You can check the battery status on the Govee Home app after connecting via Bluetooth.
  4. Wi-Fi disconnected or failed to connect?

    • Check if the device is powered on.
    • Do not skip the Wi-Fi connection steps during the device pairing process.
    • Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
    • Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
    • Try using another smartphone to pair with the device to ensure your network is working properly.
    • Shorten the distance between the device and the Wi-Fi router to less than
      50 inches, then reconnect.
  5. Cannot connect to Alexa or Google Assistant.

    • Ensure the Wi-Fi connection is stable and working properly
    • Go to “User Guide” on the app Settings page to pair the device again.
  6. Can multiple users control one device?

    • Each device can only be controlled by one account.
    • If multiple users want to manage the same device, ensure they all use the same account.

When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other. Be aware discharged battery may cause fire or smoke, tape the terminals to insulate them

CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired
    operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replace.

Not intended for illumination. Only used for creating ambiance.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Govee is a trademark of Shenzhen Intellirocks Tech Co.,Ltd. Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@govee_official
@govee.official
@Goveeofficial
@Govee.smarthome

For FAQs and more information,
please visit: http://www.govee.com/
QR Code

Company Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals