LA CROSSE TECHNOLOGY C75785-AU Glow Wireless Charging Alarm Clock User Guide

LA CROSSE TECHNOLOGY C75785-AU Glow Wireless Charging Alarm Clock User

Guide

Initial Setup

Power Up

Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the bottom of the alarm clock.
A greeting will appear on the LCD display and then your clock will move into the Settings Menu.

Settings Menu Order

Language: Whichever language is selected, the following instructions and weekday will be presented in that language.
Weekday: Weekday will set automatically after year, month, & date settings are adjusted.

Note: To enter the Settings Menu after the initial setup, hold the SET button on the back of the clock.

Buttons

1. GLOW Press to change the Glow
Light color. Hold to turn Glow Light off.

SET

Press to change Display Modes. Hold to enter Settings Menu

SNOOZE/LIGHT

Press to snooze sounding alarm, adjust backlight, or hold  for Auto-Dim settings

ALARM

Press to activate/deactivate alarm. Hold to enter Alarm ettings Menu

RESET

Press to factory reset your clock

LCD Display

Ports

LCD Display Brightness

Adjusting the LCD Display Brightness

Auto-Dim Settings

Program your LCD display to automatically dim during preselected times.

Hold the SNOOZE/LIGHT button to enter the Auto-Dim Settings Menu.
Press the +/- buttons to turn the
Auto-Dim feature on or off. Press
SNOOZE/LIGHT to confirm.
Press the +/- buttons to adjust the starting hour. Press SNOOZE/LIGHT to confirm.
Press the +/- buttons to adjust the stopping hour. Press SNOOZE/LIGHT to confirm and exit.

Display Modes

Selecting the Display Mode

Display Mode Options

Time Alarm

Setting the Alarm]

1. Hold the button on the back of the clock to enter the Alarm Settings Menu.
2. Use the +/- buttons to set your desired time. Press to confirm.
3. Next, use the +/- buttons to set your desired snooze duration (5 to 120 minutes). Press to confirm and exit the Alarm Settings Menu.
4. Your sound alarm is now activated, indicated by the icon on the LCD.

Ascending Alarm

The alarm will increase in beep frequency over a 2-minute period. After the 2-minute time frame, the alarm will stop if not snoozed or turned off.

Activating & Deactivating the Alarm

1. Press the button to activate/ deactivate the alarm and to view your alarm time.
2. The icon will appear on the LCD when the alarm is active.

Snooze Duration Countdown

When your alarm sounds, Press the SNOOZE/LIGHT button to snooze your alarm for your preselected snooze duration.
A countdown will appear on screen.
When the snooze time reaches “0,” the alarm will sound again

Glow Light Selection

Select Glow Light Color

1. Press the GLOW button to turn on the Glow Light and toggle through the different light options.
   Glow Light Color Selection Order:
   Cycle | Red | Yellow | Green | Cyan | Dark Blue | Purple | White

Press the GLOW button again to select an individual solid color. When a single color is selected, it will remain on that color. Select CYCLE to smoothly transition between all of the colors

Glow Light Brightness
Use the +/- buttons to adjust the Glow Light Brightness. It has 4 intensity levels plus an OFF option. Holding the GLOW button will also turn off the Glow Light.

5W Wireless Charger

Charging your Phone

• Place your phone on the platform. Your phone should sit flush and centered on the charging pad.
• The blue Charging Indicator Light below the LCD will be solid when your phone is successfully charging.
• The light will flash slowly if your device is not positioned properly or if your device is not compatible with the wireless charging technology. If this problem persists, try removing any large/bulky cases.

Phone Compatibility

• Compatible with all Qi Enabled devices:
•  iPhone 8 or newer
• Galaxy S8 or newer
• Galaxy Note 8 or newer

Compatibility may vary based on phone model and/or case selection.
This list is not comprehensive. Please check your phone’s manual for details regarding wireless charging capabilities

Wireless Charging FAQs

Q. Why is the blue light blinking?

A. Phone is not centered on the charging pad.
A. Your phone must be Qi Enabled to charge.
A. If the phone has a large/thick case, it may interfere with charging.
A. Foreign objects on the charging pad may make the light blink.

Q. Why is the table surface getting warm?

A. Ensure the clock is on a hard, clean surface.
A. Do not place on cloth, paper, or other items that may obstruct airflow.
A. Clear dust or other obstructions from the vents on the bottom of the clock

Important:

Wireless charging uses magnetic induction to charge your compatible smartphone. Do not place anything between your phone and the charging pad. Keep the charging pad clear of all foreign objects. Magnetic mounts, magnetic cases, or other objects between your phone and the wireless charger may reduce performance or damage magnetic strips or RFID chips found in some credit cards, security badges, passports, and key fobs. If your phone case holds any of these sensitive items, be sure to remove them before charging or make sure they are not between the back of your phone and the charging pad.

USB Charging Port

There is a 1 Amp USB Charging Port located on the right side of your alarm clock.

• Connect your external device’s USB charging cable (not included) into the USB Charging Port.
• Charging times may vary.
• USB Power Output: 1 Amp maximum current

Stay in Touch

Ask questions, watch setup videos, and provide feedback on our social media outlets.

Follow La Crosse Technology on Facebook, Instagram, Youtube, and Twitter

Warranty

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product, relating to manufacturing defects in materials and workmanship.

Contact:

]www.lacrossetechnology.com/pages/international-suppor

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure

Black Forest Originals Grand Father Clock, Ltd.
DBA La Crosse Technology, Ltd. 2809 Losey Blvd. South La Crosse, WI 54601

Specifications

Power Requirements: 5.0VDC 2.5A-3.5A Power Cord (Included) HX13-0502500-AA-001
The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be installed near the equipment and shall be easily accessible.
LCD Brightness: 4 Intensity Levels + OFF (Programmable Auto-Dim Backlight Option) Glow Light Brightness: 4 Intensity Levels + OFF Programmable Snooze Duration: 5 to 120 Minutes Indoor Temperature Range: 0°C to 50°C (32°F to 122°F)
Wireless Charger Power Output: 5 Watts USB Charging Port: 1 Amp Maximum Current Charging Cord Not Included) Settings Backup: The time and alarm settings will be saved for 3 minutes in the event it loses power. Full battery backup for extended times is not available. Dimensions: 12.7 cm L x 13.56 cm W x 7.6 cm H
(5” L x 5.33” W x 2.99” H) Factory Reset: If you’re experiencing issues with your clock, use a pen or paper clip to press the factory RESET button on the back of your clock.

Trademarks & Warning

Crosse Technology is not responsible for any damage or loss of performance with iPhone, iPod, or iPad while being used in association with this accessory.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPhone, iPod, or iPad may affect wireless performance. Apple, the Apple logo, iPad, iPhone, iPod, iPod touch, iTunes, Retina, Mac, Mac OS, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
Other company names and product names including Samsung, Galaxy, and Note are registered trademarks or trademarks of the respective companies.
Phone charging accessories are not included.

Please help in the preservation of the environment and return used batteries to an authorized depot

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error orprinting error, or their consequences.
All trademarks and patents are recognized.

Recycling & Disposal

Please consider the environment when deciding to dispose of this product. Although household electronics are generally safe to use on a daily basis, incorrect disposal can cause negative and potentially irreversible impacts on our environment.
Check with local donation centers to see if your product can be donated for future use. If disposal is the only option, federal agencies, local governments, and certified retailers may have electronic recycling programs in place. Programs may vary based on location.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>