global sources K1187205554 EV Charging Station User Manual

: June 4, 2024
: global sources

Table of Contents

Feature
Mechanical Properties
Electric Performance
Control Box Function
Charger Cord
Product structure
Installation process
Power-on inspection and debugging
Led Screen Description
Charging status description
Read User Manual Online (PDF format)
Download This Manual (PDF format)

global sources K1187205554 EV Charging Station User Manual

Feature

charging plug meet IEC 62196-2 standard.
Control box meet IEC 61851 control principle.
Excellent protection performance,protection grade IP65-Working condition.
Operating temperature: -30℃ to 55℃.

Feature

Mechanical Properties

Mechanical life: no-load plug in/pull out>10000times
lmpact of external force: can afford 1m drop and 2T vehicle run over pressure

Electric Performance

Rated voltage, current and power:250V AC 8A 10A 13A 16A 32A /7KW

Insulation Resistance:>1000MD (DC500V)
Terminal Temperature Rise:< 50K

Control Box Function

Leakage protection (restart recover).
Over voltage under-voltage protection (self-checking recover). ﹒Lightning protection.
Over current protection.
Overheat protection.
Ground protection.

Charger Cord

Specification: 3G6mm²+2*0.5mm²

Cautions

Do not bring dangerous items such as flammable, explosive or combustible materials, chemicals, flammable steam, etc. near the charging pile;
Keep the charging gun head clean and dry. If it is dirty, wipe it with a clean dry cloth. It is strictly forbidden totouch the charging gun core with your hands when it
It is strictly forbidden to use the charging pile when the charging gun or charging cable is defective, cracked, worn, broken, or the charging cable is exposed. If you find any, please contact the staff in time;
Do not attempt to disassemble, repair, or modify the charging pile. If there is a need for maintenance or modification, please contact the staff. Improper operation may cause damage to the equipment, water leakage, leakage, etc.;
If there is any abnormality during use, press the emergency stop button immediately to cut off all input andoutput power supplies;
In case of rain and thunder, please charge carefully; ﹒Children are not allowed to approach or use the charging pile during the charging process to avoid injury.
During the charging process, the vehicle is prohibited from driving and can be charged only when it is stationary. Please turn off the hybrid electric car before charging.
DO not use the device in extreme temperatures (normal operating range ( -30℃ to 55℃).
The power supply input cable should have at least 3G6mm²,It is proposed to complete the distribution of electricity by professionals.

Product structure

Overall outline drawing

Product structure

Internal structure map

Product structure

Installation process

Wiring and installing the wall bracket
Installation of charging pile inlet
Wall-mounted installation and fixing
Hang the mounting holes on the back of the device into the fixing screws on the wall from the front, and fix them;
Installation of gun base
Just below the equipment, install the gun base, the installation height, 800mm from the ground
The installation is over, the effect is as follows:

Power-on inspection and debugging

Check before operation

Before running, please check carefully and ensure the following items:

The installation position of the AC pile is convenient for operation and maintenance
The AC pile and accessories are correctly connected and installed firmly
Reasonable selection of leakage protection switch for AC inlet
No external objects or parts are left on the top of the AC pile

Power on the device

Make sure that the above inspection items before operation meet the requirements
Close the power inlet leakage protection circuit breaker
Power on the AC pile: There is about 5 seconds of power-on self-check time, and the green indicator light flashes.
After the power-on self-check is completed, observe the status of the LED indicator.

Normal standby: the green light is always on
Equipment failure: red light is always on

Description of enabling and disabling the card swipingfunction: The key at the leftmost end of the equipment panel controls the opening and closing of the cardswiping function. When you need to enable or close the card swiping function, please long press the key for 5 seconds. When prompted to authorize the card swiping to open or close, complete the card swiping operationas required to open or close the card swiping function.

Description of equipment cumulative power and clear cumulative power functions: The cumulative charging amount on the equipment display screen is displayed in two cases: during charging, the cumulative charging amount of this time is displayed; When the gun is not inserted, the historical cumulative charge is displayed. Press and hold the button at the right end of the panel for 5 seconds when the gun is not inserted to clear the historical cumulative charge.

Led Screen Description

Charging status description

Serial number| charging| Green| Blue| Red| Definition description
---|---|---|---|---|---
1| Ready| On| Off| Off| Power-on self-test or reset
2| Connect| Flash| Off| Off| The voltage of detection point 1 is 9±0.8V,
3| Charging| Off| Breathe| Off| Detection point 1 voltage is 6±0.8V, the relay is closed
4| Finish| Off| On| Off|
5| Err:CP| Off| Off| Fault (0.5s )| 1 time| The voltage of detection point 1 is 9.8V<U<11.2V; 6.8V<U<8.2V; 12.8V<U or U<5.2V; the relay is off
6| Under Voltage| Off| Off| Fault (0.5s )| 2 time| Voltage <176V
7| Over Voltage| Off| Off| Fault (0.5s )| 3 time| Voltage>264V
8| Elec Leakage| Off| Off| Fault (0.5s )| 4 time| The relay is disconnected, and it needs to be re-powered after the fault is removed before the relay is allowed to close
9| Over Current| Off| Off| Fault (0.5s)| ****