LUXPRO LP831 Focusing Universal Flashlight User Manual
- June 3, 2024
- LUXPRO
Table of Contents
LUXPRO LP831 Focusing Universal Flashlight
Features
- Constructed with aircraft-grade aluminum
- LPE optics
- Push/pull focus beam
- Enhanced rubber grip
- High quality wrist lanyard
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (3 AAA)
ANSI/PLATO FL1 STANDARD
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Cycle Modes: First turn the light on by pressing down the button on the tail cap completely and releasing. Half-press the button to cycle through modes (High/Low/Strobe). Turning the flashlight on and off quickly and repeatedly will also cycle the light through the three modes.
The light will automatically reset to high mode when off for longer than 5
seconds.
Focus Head: To focus the light beam, gently push the head away from the
light to extend it. Pull the head back towards the light to widen the beam.
Battery Replacement
The LP831C uses 3 AAA batteries. To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide out the battery case which contains the batteries. Remove the batteries from the case and insert new batteries according to the (+/-) symbols found on the case. For best results, we recommend using brand-new alkaline batteries that are the same voltage and brand. Reinsert the battery case into the flashlight with the arrow on the battery case pointing down. Re-attach the tail cap by pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP831 has a Limited 30-Day Warranty Against Manufacturer’s Defects from time of purchase. For warranty claims please contact us by calling 801-553-8886 or sending an email to [email protected]
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065
luxpro.com