LUXPRO LP174 LED Puck Light User Manual
- June 3, 2024
- LUXPRO
Table of Contents
USER MANUAL
LP174
LED Puck Light (3pk)
Features
Single button operation
Impact resistant
LED 8x 2835 SMD
Diffused lens
Adhesive backing included
Batteries included (3 AAA)
Operation Instructions
On/Off: Press and release power button on puck light to turn on and off.
Adhesive Backing: Peel protective plastic from adhesive backing, place light in desired location against a smooth surface, press puck light firmly against smooth surface for 10 seconds.
Battery Replacement
The LP174 uses 3 AAA batteries.
To replace the batteries, unscrew the light from the base by turning it
counterclockwise. Remove the old batteries and insert new batteries according
to the (+/-) symbols in the battery tubes.
For best results, we recommend using brand new batteries that are the same
voltage and brand.
Re-attach the light to the base by pressing down gently and turning clockwise
until secured.
If you know it will be a while between uses, we suggest removing the batteries from the puck light and storing it in a dry, protected place.
Product Warranty
The LP174 has a Limited 90-Day Warranty Against Manufacturer’s Defects from
time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>