LUXPRO LP200 Small Pocket Light User Manual
- June 3, 2024
- LUXPRO
Table of Contents
USER MANUAL
LP200
**Small Pocket Light
**
Features
Constructed with aircraft-grade aluminum
LPE Optics
Enhanced rubber grip
High quality pocket clip
Tactical on/off button
IPX4 waterproof rating
Batteries included (1 AA)
Operation Instructions
On/Off: Press and release the button on the tail cap to turn the light on and off.
Cycle Modes: First turn the light on by pressing down the button on the
tail cap completely and releasing. Half-press to cycle through the modes
(High/Low/Strobe). Turning the flashlight on and off quicky and repeatedly
will also cycle the light through the three modes.
The light will automatically reset to High mode when off for longer than 2
seconds.
Battery Replacement
The LP200 uses 1 AA battery.
To replace the battery, turn the tail cap counterclockwise to remove it. Tip
the light downward to slide out the single battery.
Insert a new battery (+) side first. For best results we recommend using brand
new alkaline batteries that are the same voltage and brand. Re-attach the tail
cap by pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.
Product Warranty
The LP200 has a Limited 30-Day Warranty Against Manufacturer’s Defects from
time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>