LUXPRO LP290V2 High-Output Everyday Pocket Light User Manual
- June 3, 2024
- LUXPRO
Table of Contents
LUXPRO LP290V2 High-Output Everyday Pocket Light
Features
- Constructed with aircraft-grade aluminum
- LPE Optics
- Patented TackGrip molded rubber grip
- High quality pocket clip
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (2 AA)
Operation Instructions
On/Off : Press and release the button on the tail cap to turn the light
on and off.
Cycle Modes : First turn the light on by pressing down the button on the
tail cap completely and releasing. Half-press to cycle through the modes
(High/Low/Strobe). Turning the fashlight on and of quicky and repeatedly will
also cycle the light through the three modes. The light will automatically
reset to High mode when of for longer than 2 seconds.
Battery Replacement
The LP290V2 uses 2 AA batteries. To replace the batteries, turn the tail cap
counterclockwise to remove it. Tip the light downward to slide out both
batteries. Insert two new batteries (+) side facing down. For best results, we
recommend using brand new alkaline batteries that are the same voltage and
brand. Re-attach the tail cap by pressing down lightly and turning it
clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the fashlight and storing it in a dry, protected place.
Product Warranty
The LP290V2 has a Limited Lifetime Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>