LUXPRO LP1312R High-Output LED Flashlight User Manual
- June 3, 2024
- LUXPRO
Table of Contents
LUXPRO LP1312R High-Output LED Flashlight
Operation Instructions
On/OF: Press and release the button on the side of the light to turn the light on and OFF
Cycle Modes: Turn ashlight on and o quickly and repeatedly to cycle
through modes (High/Low).
Light automatically resets to High mode when turned o for longer than 2
seconds.
If you know it will be a while between uses, we suggest removing the batteries from the ashlight and storing it in a dry, protected place.
Hidden Strobe On/OFF: Press and hold button for 3 seconds to
activate hidden strobe. Flashlight will remain in hidden strobe mode until it
is deactivated by pushing and holding the button for 3 seconds again.
Battery Replacement
The LP1312R uses 9 AA batteries. To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide out the battery case which contains the batteries. Remove the batteries from the case and insert new batteries according to the (+/-) symbols found on the case. For best results, we recommend using brand new alkaline batteries that are the same voltage and brand. Re-insert the battery case into the ashlight. Re- attach the tail cap by pressing down lightly and turning it clockwise until tight.
Features
- Constructed with aircraft-grade aluminum
- Long range LPE optics
- Patented TackGrip rubber grip
- Ergonomic side button
- Tactical on/off button
- IPX4 waterproof rating
- Batteries included (9 AA)
ANSI/PLATO FL1 STANDARD
MODES
|
LUMENS
|
RUN TIME
|
BEAM DISTANCE
---|---|---|---
High| 1200 lm| 3h| 300m
Low| 350 lm| 9h| 100m
Strobe| 1200 lm| —| —
Product Warranty
The LP1312R has a Limited Lifetime Warranty Against Manufacturer’s
Defects from time of purchase. For warranty claims please contact us by
calling 801-553-8886 or sending an
email to [email protected]
luxpro.com 866.553.8886
14725 S Porter Rockwell Blvd Ste C Bluffdale, UT 84065