AUDIO SYSTEM AS130FLEVO2 130mm Flat Line Car Speakers User Manual

June 3, 2024
AUDIO SYSTEM

Audio_System_LOGO

AUDIO SYSTEM AS130FLEVO2 130mm Flat Line Car Speakers

AUDIO-SYSTEM-AS130FLEVO-130mm-Flat-Line-Car-Speakers-
PRODUCT

Congratulations on purchasing a high-quality AUDIO SYSTEM product incl. GERMAN SOUND.

Important : Completely read this operating instruction before installation and use of the device.

Attention : Pay attention to advices and instructions of the car manufacturer. Check the polarity when connecting the speakers.

Important : You will need your purchase receipt as proof of purchase for any and all warranty repairs and for insurance purposes. Keep your receipt, owner´s manual and packing materials in a safe location for possible future use.

Attention : Use of sound components can impair your ability to hear necessary traffic sounds and may constitute a hazard while driving your automobile.

AUDIO SYSTEM GERMANY

accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of our products.
We recommend installing the equipment by an authorized service center or dealer. A professional fitting and connection is the requirement for further warranty and perfect sound.

Mechanical Installation Tip

Warning : First disconnect negative pole of your car battery. Check- polarity, changing polarity may cause serious damage to your car electric. Best speaker positions are the original build in positions. Easy installation and original look are the reasons.
Please note that the speakers are installed flat and stable. The quality of the installation decides very much the sound, therefore, attention should be paid to insulation and care during installation. Please note that the speakers are protected from heat, sunlight, mechanical influences, moisture and wetness by accessories from AUDIO SYSTEM.

Attention : Install all cables as straight as possible without squashing or laying them over sharp edges. Otherwise this can cause short circuit or damages to your whole installation.

Attention : Be careful removing original plastic parts of your car. The fitting parts could be damaged and have to be replaced.

Important : The right polarity of all speakers is extremely important for the sound of your car audio system. We recommend changing polarity of the tweeter finding out the best possible sound. The best is to listen and/or to measure it.

Dimensions / Specifications

0.30 Kilogramm Weight
129/155 mm External Diameter
112 mm Installation Diameter ( b )
65 mm Magnet Diameter
45 mm Total Installation Depth ( d )
33 mm Installation Depth
Papier Paper Speaker Cone
Elastomere Elastomere Surround/Edge
Stahl Sheet Metal Basket
Connex Connex Spider
Aluminium Aluminium Coil Former
Dust Protection Cap

Speaker Parameters

Music 120 Watt Power
RMS 80 Watt
dB 87.9 dB SPL
Fb 75- 6500 Hz Frequency Range
Re 2.8 W DC Resistance
Zn 3.0 W Nominal Impedance
Fs 74 HZ Resonance Frequency
D 28 mm Voice Coil Diameter
+/- 2,5 mm __**X-Max Linear Excursion**
Qms 6.71 Qms Mechanical Q Factor
Qes 1.10 Qes Electrical Q Factor
Qts 0.90 Qts Total Q Factor
Mms 6.5 Gramm Moving Mass
Vas 7.65 Liter Equivalent Air Volume
Bl 2.98 Tm Force Factor
Sd 85 cm² Effective Membrane Surface

Frequency Response and Impedance

AUDIO-SYSTEM-AS130FLEVO-130mm-Flat-Line-Car-Speakers-
FIG-2

www.audio-system.deaudio system germany – falltorstrasse 6 – 76707 hambrückeN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AUDIO SYSTEM User Manuals

Related Manuals