DOYMA UGA KD 110 Sealing Collar User Manual
- June 3, 2024
- DOYMA
Table of Contents
**DOYMA UGA KD 110 Sealing Collar User Manual
**
Including plug caps that are leak-tight against pressing water
PRESSING WATER
- Use in unfinished structures to be made from waterproof concrete (white tank)
- With screw closure
PRODUCT ADVANTAGES
- Quick, easy installation
- Leak-tight against gas and pressing water immediately after installation due to plug cap
- Permanently reliable sealing
- Versatile variants and connection options thanks to precisely fitting system caps and inserts
- Assembling in batteries possible thanks to easy combination of flange sleeves
- No reworking required
- Special design for twin/element walls
TECHNICAL DETAILS
- Single flange sleeve can be used for 80–500 mm wall thickness
- Double flange sleeve can be used for 140–500 mm wall thickness
- Design for wall thicknesses over 500 mm possible
PRODUCT SCOPE
- Flange sleeve for holding system plug cap with protective film, leak-tight against pressing water
- The flange sleeve has a sealing system. This ensures an absolute leak-tight connection to the concrete
ASSEMBLING IN BATTERIES
Angular flange sleeve
Suitable for cables laid at an angle of 30°, 45° or 60° coming from any
direction. With auxiliary frame and polystyrene wedge.
Single or double flange sleeve available. Minimum wall thickness is 250 mm.
The UGA range is excluded from the DOYMA 25-year warranty.
Product| |
Article number
---|---|---
KD110-K/150| Single flange sleeve for wall thicknesses up to 500 mm|
4 01 2 110 150 0 4
KD110-K/200|
4 01 2 110 200 0 4
KD110-K/250|
4 01 2 110 250 0 4
KD110-K/300|
4 01 2 110 300 0 4
KD110-K/400|
4 01 2 110 400 0 4
KD110-K/500|
4 01 2 110 500 0 4
KD110-K2/150| Double flange sleeve for wall thicknesses up to 500 mm|
4 02 2 110 150 0 4
KD110-K2/200|
4 02 2 110 200 0 4
KD110-K2/250 4 02 2 110 250 0 4|
4 02 2 110 250 0 4
KD110-K2/300 4 02 2 110 300 0 4|
4 02 2 110 300 0 4
KD110-K2/400|
4 02 2 110 400 0 4
KD110-K2/500|
4 02 2 110 500 0 4
KD110-K2-EW/150| Double flange sleeve for twin/element walls with thicknesses up to 500 mm|
–
KD110-K2-EW/200|
–
KD110-K2-EW/250|
–
KD110-K2-EW/300|
–
KD110-K2-EW/400|
–
KD110-K2-EW/500|
–
| Article | Angle |
|---|
Angular single flange sleeve
KD110-K-S30/(L)| 30°
KD110-K-S45/(L)| 45°
KD110-K-S60/(L)| 60°
Angular double flange sleeve
KD110-K2-S30/(L)| 30°
KD110-K2-S45/(L)| 45°
KD110-K2-S60/(L)| 60°
The distances of the auxiliary frame must be taken into account when assembling items in batteries one on top of the other.