Lucci LEDlux 259100 Dimi Night Light Instruction Manual
- June 3, 2024
- LUCCi LEDlux
Table of Contents
Lucci LEDlux 259100 Dimi Night Light
DIMI NIGHT LIGHT
SKU# 259100 Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct
function and safety, please read and follow all instructions carefully before
assembly, installation and use of this luminaire. Please keep instructions for
future reference.
Warranty
- This luminaire is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of installation.
- If the luminaire is not installed by a licensed electrician, it will void the warranty.
- Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty inquiries.
- The warranty will be void if there is any damage due to improper usage or modification to the luminaire.
- Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.
Installation requirements
- Select a suitable location for installation:
- This product is suitable for indoor use only.
- Do not place flammable material near or cover the luminaire.
- When using the luminaire in an area prone to moisture, ensure that the area is well-ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and therefore not covered under warranty.
- This product is rated IP20, which is NOT suitable to be used near the shower or bath area.
- Lay out all the components on a smooth surface and make sure no components are missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
- Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Installation directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material.
- Plug the luminaire onto the power socket outlet;
- Switch ON/OFF the luminaire using the ON/OFF/AUTO switch.
- Alternately, the luminaire can be switched to AUTO mode:
- The light will be switched off when there is enough ambient light in the room;
- The light will be switched on automatically when there is no ambient light.
Safety Tips
- This product is NOT a toy. Keep out of reach of small children.
- Young children should be supervised to ensure that they do not play with this product.
- Completely insert the product into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
- Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Do not try to disassemble the luminaire in any circumstances.
- Never touch or unplug the luminaire with wet hands, which may cause electrical shock.
- Always ensure the luminaire has been unplugged and cooled down before performing any maintenance, cleaning, or making any adjustments to the luminaire.
- Select a suitable location away from liquids and hazards.
- Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
- To clean, wipe with a dry clean cloth. Do NOT soak or immerse the luminaire in water or other liquids.
Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>