LG DLE7100 Ultra Large Capacity Electric Dryer User Guide

June 3, 2024
LG

LG DLE7100 Ultra Large Capacity Electric Dryer User Guide
LG DLE7100 Ultra Large Capacity Electric Dryer

OPERATION

WARNING
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the IMPORTANT SAFETY INSTRUCTIONS, before operating this dryer.

Using the Dryer

  1. Clean the Lint Filter
    If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Make sure to reinstall the filter, pressing down until it clicks firmly into place. The dryer will not operate without the lint filter in place.

  2. Load the Dryer
    Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to divide it into smaller loads for proper performance and fabric care.

  3. Turn on The Dryer
    Press the POWER button to turn ON the dryer. The cycle LEDs will illuminate and a chime will sound.

  4. Select a Cycle
    Turn the cycle selector knob in either direction until the LED for the desired cycle is on. The preset temperature, dry level, and option settings for that cycle will be shown. Default settings for the selected cycle can now be changed if desired. Refer to the Cycle Setting and Options page for details.

NOTE
Not all options or modifiers are available on all cycles. A different chime will sound and the LED will not come on if the selection is not allowed.

  1. Begin the Cycle
    Press the START/PAUSE button to begin the cycle. The cycle can be paused at any time either by opening the door or by pressing the START/PAUSE button.
    If the cycle is not restarted within 60 minutes of being paused, the dryer will shut off and the settings will be lost.

  2. End of Cycle
    When the cycle is finished, the chime will sound. Immediately remove your clothing from the dryer to reduce wrinkling. If Wrinkle Care is selected, the dryer will tumble briefly every few minutes to help prevent wrinkles from setting in the clothes.

Loading the Dryer

WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

  • Check all pockets to make sure that they are empty. Items such as clips, pens, coins, and keys can damage both your dryer and your clothes. Flammable objects such as lighters or matches could ignite, causing a fire.
    Failure to do so may result in fire, explosion, or death.

  • Never dry clothes that have been exposed to oil, gasoline, or other flammable to oil, gasoline, or other flammable substances. Washing clothes will not completely remove oil residues. Failure to obey this warning may result in fire, explosion, or death.

NOTE

Loading Tips

  • Combine large and small items in the same load.
  • Damp clothes will expand as they dry. Do not overload the dryer; clothes require room to tumble and dry properly.
  • Use mesh laundry bags to separate clothes with zippers, hooks, straps, and drawstrings to prevent them from catching on or tangling with other clothes or damaging the lint filter.

 Control Lock

Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating.

Press and hold the button marked *Control Lock for 3 seconds to activate or deactivate the Control Lock function. The Control Lock icon will be shown in the display, and all controls will be disabled except the POWER button.

NOTE
Once set, Control Lock remains active until it is manually deactivated. Control Lock must be turned off to run another cycle. To deactivate Control Lock, press and hold the *Control Lock button for 3 seconds.

Additional Operation Information

This manual contains an abbreviated Operation section.
The complete owner’s manual can be found on the LG website at: https://us.smartthinq.com/images/pdfmanual/DR_TD27_WIN_EN.pdf

QR Code

  • Check the Lint Filter Before Every LoadSorting Loads
  • Loading the Dryer
  • Control Panel
  • Cycle Guide
  • Cycle Settings and Options

SMART FUNCTIONS

LG ThinQ Application

Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone.
Follow instructions to download and install the application.

LG ThinQ Application Features

Smart Diagnosis™
This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.

Smart Diagnosis™ Feature
This feature is only available on the models with or logo.
Use this feature to help you diagnose and solve problems with your appliance.

NOTE

  • For reasons not attributable to LGE’s negligence, the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, WiFi disconnection, local app store policy, or app unavailability.
  • The feature may be subject to change without prior notice and may have a different form depending on where you are located.

Using Audible Diagnosis to Diagnose Issues

Follow the instructions below to use the audible diagnosis method.
Launch the LG ThinQ application and select the Smart Diagnosis™ feature in the menu.
Follow the instructions for audible diagnosis provided in the LG ThinQ application.

  1. Press the Power button to turn on the appliance.Do not press any other buttons.

  2. Hold the mouthpiece of your phone in front of the or logo.
    SMART FUNCTIONS

  3. Press and hold the Temp. button for 3 seconds or longer while continuing to hold your phone to the logo.

  4. Keep the phone in place untill the tone transmission has finished. The display will count down the time. Once the cont down is over and the tones have stopped, the diagnosis will be displayed in the application.

NOTE
For best results, do not move the phone while the tones are being transmitted.

MAINTENANCE

Regular Cleaning

  WARNING

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:

  • Unplug the dryer before cleaning to avoid the risk of electric shock. Failure to follow this warning may cause serious injury, fire, electric shock, or death.
  • Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.

Cleaning the Exterior

Proper care of your dryer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent. Immediately wipe off any spills with a soft, damp cloth.

NOTE

  • Do not use methylated spirits, solvents, or similar products.
  • Never use steel wool or abrasive cleansers; they can damage the surface.

Cleaning the Interior

Wipe around the door opening and seal with a soft, damp cloth to prevent lint and dust buildup that could damage the door seal.

Clean the window with a soft cloth dampened with warm water and a mild, nonabrasive household detergent, then wipe dry.

The stainless steel drum can be cleaned with a conventional stainless steel cleaner, used according to the manufacturer’s specifications. Never use steel wool or abrasive cleansers; they may scratch or damage the surface.

Cleaning Around and Under the Dryer

Vacuum lint and dust from around the dryer and underneath it regularly. Vent ductwork should be checked for lint buildup and cleaned at least once per year. If any noticeable reduction in airflow or drying performance occurs, immediately check ductwork for obstructions and blockages.

Maintaining Ductwork

Vent ductwork should be checked for lint buildup once per month and cleaned at least once per year. If any noticeable reduction in airflow or drying performance occurs, immediately check ductwork for obstructions and blockages. Contact a qualified technician or service provider.

Cleaning the Lint Filter

Always clean the lint from the filter after every cycle.

To clean, open the dryer door and pull the lint filter straight up. Then:

  1. For everyday cleaning, roll any lint off the filter with your fingers, or

  2. Vacuum the lint filter.

  3. If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling.

NOTE
NEVER operate the dryer without the lint filter in place. NEVER operate the dryer with a wet lint filter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals