Rebel MIK0150 Wireless Microphone User Manual

: June 3, 2024
: Rebel

Table of Contents

Rebel MIK0150 Wireless Microphone
SAFETY INSTRUCTION
PRODUCT DESCRIPTION
OPERATION
SPECIFICATION
Correct Disposal of This Product
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rebel MIK0150 Wireless Microphone

SAFETY INSTRUCTION

Store the device in a dry place, with good air circulation.
Protect the device from being dropped.
Protect the device from moisture and other liquids.
Before connecting the device to power supply socket, make sure, that the device’s voltage matches the voltage in the power socket.
Before plugging the device to power supply, make sure, that the power switch is in OFF position.
Do not attempt to repair this device yourself. Repairs can be done only by qualified manufacturers’ repair center.
The device does not contain parts serviceable by user.
Before cleaning the device, make sure that the device is unplugged from power mains.
Clean the device with soft, slightly damp cloth, without abrasive agents.
If the device stopped working properly, makes alarming noises, or it behaviors concerning, stop using the device and contact the service center.
If the device is not going to be used for a long time, take out the batteries and unplug it from power supply.

PRODUCT DESCRIPTION

Receiver

6,5 mm jack
Power button
Power/charging indicator
MicroUSB socket
Microphone connection indicator
Antenna

Microphone

Microphone head
Display
Sound adjustment buttons (ECHO, TREBLE,BASS, VOL)
Power button
Battery compartment cover

TURNING ON AND BATTERY INSTALLATION

Receiver

Connect the receiver to microphone input.
Press the power button. Operation will be signaled by the power indicator.

Microphone

Twist off the battery compartment cover.
Insert two AA batteries (note the polarity).
Twist on the battery compartment cover.
Press and hold the power button to turn on the microphone.

OPERATION

Connect the receiver to the external device, ex. an amplifier and turn it on.
After turning on the microphone, it will connect to the receiver automatically.
To change the frequency, press the frequency change button.
To turn off the microphone, press and hold the microphone power button.
To change the sound settings, use the sound adjustment buttons. The set value will be shown on the display.

Attention: if the receiver does not turn on, charge it with provided microUSB cable. Charging will be signaled with the charging indicator.

SPECIFICATION

System specification

Frequency range: UHF 560,5 – 574,5 MHz
Modulation: FM
Frequency stability: ±0,005%
Dynamic range: 98 dB
Max. deviation: ± 50 kHz
Deviation range: ±30 kHz ~ ±50 kHz
Frequency response: 75 Hz ~ 18 kHz +/- 3 dB
S/N: >98 dB
Distortion: 0,01%
T.H.D: <0,1% @ 1 kHz
Set includes: receiver, handheld microphone, microUSB cable, rechargeable battery 18650 1200 mAh 3,7 V, user’s manual

Receiver specification

Sensitivity: -98 dB
Sensitivity range: -95 ~ 71 dBm
Dimensions: 200 x 35 x 25 mm
Weight: 30,5 g

Transmitter specification

Built-in antenna
Output power: 10 mW
Battery: 2 x AA 1,5 V

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other househol wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.rebelelectro.com