Nostalux 7411 Puck Solar Grondsport Instructions
- June 3, 2024
- Nostalux
Table of Contents
7411 Puck Solar Grondsport
Instructions
7411 Puck Solar Grondsport
Assembly and installation instructions
Make sure that you install the solar ground fixture at a place with sufficient
sunlight.
Check the required dimensions for the installation. Fig. 1
Activate the solar ground spot by pressing the button ON. Fig. 2
Place the solar ground spot.
The solar panel stores the solar energy during the day so that the LED
automatically lights up when it is dark.
Maintenance requirements: It is recommended that the surface is rubbed
regularly witha neutral oil or water without cleaning agents and then wiped
with a soft cloth.
Keep the armature free from a salty environment, coastal location and an acid
free environment, this affects the armature. Rub it regularly with Carwash, it
ensures a longer lifetime of the armature.
If the solar panel is dirty or damaged, the battery can’t charge properly.
In case of damage or breakage of the protective glass, replace the glass
immediately to ensure the IP value. In case of damage or fracture of the
protective glass, replace the glass directly to insure the IP value.
Replacement of the battery is only possible with a similar rechargeable
battery.
Type Ni-Mh AA 1500mAh1.2V. Open the spot by unscrewing the four screws and
removing the glass plate. Fig. 3
www.ks-verlichting.nl
Update: 1-2018
Documents / Resources
|
Nostalux 7411 Puck Solar
Grondsport
[pdf] Instructions
7411 Puck Solar Grondsport, 7411, Puck Solar, Grondsport, Solar Grondsport,
Puck Grondsport
---|---