HSPRO T16 Wireless Bluetooth Headphones User Manual
- June 3, 2024
- Hspro
Table of Contents
HSPRO T16 Wireless Bluetooth Headphones
INTRODUCTION
Thank you for purchasing our product. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
PACKAGE CONTENTS
- Wireless Earbuds × 1 pair (left and right)
- Charging Case
- Micro USB cable
- User Manual
AT A GLANCE
CHARGING CASE
HOW TO WEAR
Insert the earbud into your ear and rotate to fit comfortably.
EARBUDS LED INDICATOR GUIDE
CHARGING CASE INDICATOR GUIDE
USING YOUR T16
Charge the earbuds
Put the earbuds into the charging case.
Note: When your earbud battery life is low, you will hear a voice reminder.
CHARGE THE CHARGING CASE
- Plug the small end of the USB cable into the Micro USB port of the charging case.
- Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
Note: It takes approximately 2 hours to fully charge the charging case. A fully charged charging case can charge the earbuds approximately 3 times.
POWER ON & OFF
Automatic operation
- Power on: Open the lid of the charging case and take the earbuds out.
- Power off: Put the earbuds back into the charging case.
Note: When the charging case is out of power, putting the earbuds back in the charging case will not turn the earbuds off.
MANUAL OPERATION
- Power on/off: Tap and hold the touch button on the left/right earbud for 5 seconds.
Note: When the two earbuds are paired with the phone, turn off one earbud manually will make the other one be off at the same time.
PAIRING & CONNECTIVITY
- Turn on the Bluetooth of your Bluetooth device.
- Take the earbuds out of the charging case and they will enter pairing mode automatically and the LED indicator on the earbud will flash red and blue alternately.
- Choose “T16” from the list of found Bluetooth devices on your Bluetooth device to pair.
Notes
- Make sure the earbuds and your Bluetooth device are next to each other within 33 feet or 10 meters and there are no obstacles between.
- If pairing failed, put the earbuds back into the charging case make sure that they have been turned off. Then pair the earbuds with your Bluetooth device again.
- When the earbuds are on but not paired with a Bluetooth device, they will be automatically off after 5 minutes.
- The earbuds will connect to the last paired Bluetooth device automatically when they are turned on. Please turn on the Bluetooth of your Bluetooth device before turning on the earbuds.
PRIMARY/SECONDARY MODE
These earbuds have primary-secondary switch function.
- When the earbuds have been connected to a Bluetooth device, take out either of the two earbuds, it can be connected and used normally. During this period, you can take out the other one and they will pair with each other so you can use both of the earbuds.
- When both earbuds are connected to your phone, no matter which one is put back to the charging case, you can use the other one without interruption.
EARBUDS FUNCTIONS
CALL FUNCTIONS
Activate voice control of phone
After the earbuds are connected to your phone, tap and hold the touch button
for 2 seconds and remove your finger from the touch button.
Tap and hold the touch button for 2 seconds again to exit. (This function
works only when your phone has voice control function; please refer to the
instructions of your phone for details.)
Clean the earbuds and charging case
Clean the earbuds and charging case only with a dry, soft cotton swab or equivalent.
SPECIFICATIONS
SAFETY AND WARRANTY
Important safety instructions
- Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention.
- If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product.
- This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy – never allow children to play with this product. Always store the product out of reach from children. The bags themselves or the many small parts they contain may cause choking if ingested.
- Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits which could result in a fire or electric shock.
- None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
- Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
- Keep all products, cords, and cables away from operating machinery.
- If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact us.
- Do NOT use in areas where there are explosive hazards.
- Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).
- Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, water skiing, surfing, etc.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the earbuds.
- Dispose of the product according to local standards and regulations.
Note: Always drive safely, avoid distractions and follow local laws!
- Using the earbuds while operating a motor vehicle, motorcycle, watercraft or bicycle may be dangerous, and is illegal in some jurisdictions, just as use of the earbuds with both ears covered while driving is not permitted in certain jurisdictions. Check your local laws.
- Use with caution while using your earbuds when you are engaging in any activity that requires your full attention. While engaging in any such activity, removing the earbuds from your ear or turning off your earbuds will keep you from being distracted, so as to avoid accident or injury. Do not take notes or read documents while driving.
- When using and charging this product, basic precautions should always be followed, including the following:
- Read all the instructions before using the charging case.
- To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
- Do not expose charging case to water, rain, liquids or snow.
- Use of a power supply or charger that is not recommended or sold by power pack manufacturer may result in a risk of fire or injury.
- Do not use the charging case in excess of its output range.
- Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury.
- Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or extreme temperature may cause explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts.
Warranty
We strive to build our products with the highest attention to detail and
craftsmanship. However, sometimes there are occurrences of defect.
We are happy to offer a one-year hassle-free warranty to all our products as
we continue to make amazing products. Please contact us if you have any
questions about our devices.
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FAQs
How durable are the truly wireless HSPRO T16 earbuds?****
Before their battery runs out, true wireless headphones typically have a battery life of 3 hours or less. Charger cases are useful in this circumstance. Your headphones’ listening time can be increased by at least 5 to 6 hours with the use of a suitable charging case.
How should I wear my HSPRO T16 Bluetooth earbuds?****
Both ears should get the headset (earbud) components. Place the item with the (left) mark in your left ear and the item with the (right) mark in your right ear. On the left unit, there is a tactile dot. Twist the headset to deeply enclose the earphone tip in your ear (earbud).
Can you use the HSPRO T16 true wireless earbuds to make phone calls?****
Nowadays, a microphone may be found in practically all wireless earbuds and headphones. Many beam-forming microphones are included in the better models, which makes it simple to switch between taking phone calls and playing music.
How long are the HSPRO T16 wireless earphones powered on for?****
Two well-known brands of wireless earphones, the AirPods and Galaxy Buds Pro, provide 5 to 6 hours of listening time on a single charge. Given the increased functionality and improved sound quality, the half-day battery life is regarded as being quite good for the current market.
How long do HSPRO T16 earphones take to charge?****
About two hours are needed to fully recharge the earbuds. If the battery is low, charging it in the charging case will increase its lifespan by 10 to 20 minutes.
Can I leave my HSPRO T16 wireless earbuds at home just in case?****
Keeping wireless earphones in their cases is preferable to not doing so. In order to avoid overcharging the battery, almost all wireless earbuds have a trickle charging mode that slows charging from 80 to 100 percent. Nearly all wireless earbuds will also automatically stop charging once they have reached 100% charge.
With the HSPRO T16 Bluetooth earbuds, can you answer calls?****
Bluetooth should be enabled on your phone. Connect your Bluetooth headset and phone. Follow the on-screen instructions to put the Bluetooth headset in discovery mode.
Can HSPRO T16 earbuds be charged overnight?****
Lithium batteries have a built-in auto-off feature that engages when a full charge is reached to prevent overcharging. Even while still plugged in, the battery level must fall below a certain point for the device to begin charging again.
How do the HSPRO T16 wireless earbuds operate in terms of technology?****
Bluetooth headphones use low-power radio waves that operate between 2.402 and 2.480 GHz to facilitate wireless communication. The normal range for these devices is between 10 and 30 metres, depending on the software being used. In rare situations, up to 8 devices can be connected to a single source.
What kind of microphone does the HSPRO T16 pair of earbuds use?****
The most common kind of in-headphone microphone is an MEMS or ECM one. Each of these is positioned around the device and built into the internal case.
How do the wireless HSPRO T16 earbuds communicate?****
Instead of requiring wires or connections, a Bluetooth® device connects to your mobile device, smartphone, or computer using radio waves. The Bluetooth wireless short-range communications technology standard is used by millions of products that we use every day, such as headsets, smartphones, laptops, and portable speakers.
How far can the HSPRO T16 earbuds be used with a phone?****
Consumer electronics including wireless earphones, Bluetooth headsets, tablets, and smartphones running the Apple and Android operating systems fall under this category. Class 2 Bluetooth 4.0 radios can officially transfer data up to 33 feet away.
How long can you wear the wireless HSPRO T16 earbuds?****
Before their battery runs out, true wireless headphones typically have a battery life of 3 hours or less. Charger cases are useful in this circumstance. Your headphones’ listening time can be increased by at least 5 to 6 hours with the use of a suitable charging case.
How long do the wireless HSPRO T16 earbuds last?****
Contrary to popular assumption, high-quality wireless earbuds can operate continuously for up to 5 hours without a case. The portable charging case has actually much improved in terms of power efficiency, extending the talk or playtime to up to 20 hours.
How far away can HSPRO T16 earbuds still function?****
The ideal distance for any Bluetooth audio device is roughly 60 centimeters, even though the majority of Bluetooth devices have a 10 metre (33 foot) range.