Razor W15110710009 Vector Caliper Brake Replacement Instructions
- June 3, 2024
- Razor
Table of Contents
Razor W15110710009 Vector Caliper Brake
Required Tools: (Not included)
- Long needle pliers
- 5 mm Allen wrench
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF
and disconnect charger before conducting any assembly or maintenance
procedures. Failure to follow these steps in the correct order may cause
irreparable damage.
INSTALLATION INSTRUCTION
- Step 1
Using long needle pliers, pinch the end cap from the brake cable. Remove the end cap and set aside.
- Step 2
Using a 5 mm Allen wrench, loosen the bolt that holds the brake cable onto the brake caliper actuator arm. Slide the cable out.
- Step 3
Loosen and remove the two (2) hex bolts that hold the brake caliper onto the frame and remove.
- Step 4
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
Need Help?
Visit our website atwww.razor.com or call toll-free
at 866-467-2967 Monday – Friday 8:00am
– 5:00pm Pacific Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>