Razor W15110710003 Vector Battery Instruction Manual
- June 3, 2024
- Razor
Table of Contents
W15110710003 Vector Battery
Instruction Manual
W15110710003 Vector Battery
Required Tools: (Not included)
A. Phillips screwdriver
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.
Step 1
Using a Phillips screwdriver, remove two (2) screws from the battery cover on
the right side of the unit.| Step 2
Locate and disconnect the battery and charger port connectors from the
controller.
---|---
|
Step 3
Using a Phillips screwdriver, remove one (1) screw from the battery bracket
and slide the bracket up.| Step 4
Slide the battery to the side and out from the unit.
|
Step 5
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
Need Help?
Visit our website at www.razor.com
or call toll-free at 866-467-2967
Monday – Friday 8:00am – 5:00pm Pacific Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>