Clarsen K800i Brush On Mould Remover Instructions

Clarsen K800i Brush On Mould Remover

INTRODUCTION

A powerful, formulation that kills mould and mildew, and removes staining. For use in areas where there is a heavy and ingrained, mould build-up. Designed to allow for a longer dwell time, and greater penetration. Provides long-lasting protection against re-growth. Safe to use on most surfaces.

BRUSH ON GEL MOULD REMOVER

For heavy ingrained mould build-up

• Leaves a streak-free finish
• Prevents re-growth
• Quick drying
• Use inside and outside

DIRECTIONS FOR USE

•  Spread directly onto the surface, using a brush.
•  Leave to dwell for a few minutes. 3. Rinse away using a damp cloth.

IMPORTANT

• Causes eye and skin irritation.
• Contact with eyes and skin should be avoided.

IF ON SKIN

Wash with plenty of soap and water.

IF IN EYES

• Rinse thoroughly with water.
• If medical advice is needed, have product container or label at hand.
• Do not use for medical or hygiene purposes.
• Do not mix with any other preparations.
• DO NOT INGEST.
• If product is ingested, then seek medical advice.
• Always test on an inconspicuous area prior to use and only proceed when satisfied with the results.
• Rinse hands after use.
• Read Label before use

KEEP OUT OF REACH OF CHILDREN AND ANIMALS.

< 5% Chlorine based bleaching agents <5% Anionic surfactants

The Enterprise Department Ltd.

• 11 Bridge Street, Bishop’s Stortford,
• Hertfordshire CM23 2JU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>