Razor W13112144015 Power Core E90 Sprint Controller Replacement Instructions
- June 3, 2024
- Razor
Table of Contents
Razor W13112144015 Power Core E90 Sprint Controller
Required Tools: (Not included)
- A. Phillips screwdriver
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.
Step 1
Using a Phillips screwdriver, remove the five (5) screws from the side with the power switch
Step 2
Pull the cover off. Be careful not to damage the wires for the charger port and power switch. Set cover aside.
Step 3
Using a Phillips screwdriver, remove the two (2) screws that hold the controller onto the frame.
Step 4
Disconnect all connectors from the controller and remove the controller.
Step 7
Reverse the procedures
ATTENTION: Charge battery 12 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00am – 5:00pm Pacific Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>