Razor W13113202178 Power A5 Collar Clamp Replacement Procedures Instruction Manual
- June 3, 2024
- Razor
Table of Contents
Razor W13113202178 Power A5 Collar Clamp Replacement Procedures Instruction
Manual
Required Tools: (Not included)
- A. 5 mm Allen wrench
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.
Step 1
Using a 5 mm Allen wrench, loosen the bolt from the collar clamp. Slide the
stem off from the fork.
Step 2
Slide collar clamp off from the stem and remove the bolt from the collar
clamp completely. This will allow you to pass the collar clamp through the
throttle cable.
Step 3
Reverse the steps.
ATTENTION: Charge battery 10 hours before using.
Customer Support
Need Help?
Visit our website at www.razor.com or
call toll-free at 866-467-2967
Monday – Friday 8:00am – 5:00pm Pacific Time
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>