new garden Cherry Bulb with Solar Panel Instructions

new garden Cherry Bulb with Solar Panel

WARNING

WARNING Read the instructions for use carefully before handling the product. NEWGARDEN cannot be held responsible if the usage guidelines and/or product recommendations described in these instructions have not been followed. IP54: Newgarden products with IP 54 can be used outdoors and are protected against dust and light rain.

• If this product also has accessories made of natural fibers, wood or metal parts, it is recommended to protect it from direct contact with water and moisture. store in a dry place after use.
• In case of rain or very adverse weather conditions, it should be protected from the weather to avoid future problems.
• Follow these instructions to avoid falls, electric shocks, or installation and commissioning failures of the product.
• Keep these instructions for future use.
• Remove the assembly from the enclosure before connecting it to the power supply.
• Operating temperature range from o to 40C.
• Do not use the product in any other temperature range, doing so may cause the irreparable failure of the product.
• Any internal replacement of the lamp by the user will render the product out of warranty.
• This lamp is not protected against immersion in water, if installed improperly, it will cause accidents.
• Do not place the product next to heat sources, it could damage the product and ultimately cause a fire.
• Keep combustible materials away from the bulbs.
• Do not allow the lamp or connector to come into contact with walls, fabrics associated with curtains blinds or other materials.
• In case of abnormal operation, switch off the product and contact qualified personnel.
• To prevent water ingress, the charging connector plug must always be in place and securely fastened (unless charging).
• If extension cords are used, take care that the connection is not in places where water can accumulate.
• AvoId making disconnections when the equipment is wet. When used outdoors in wet locations, the electrical installation to which it is connected must provide ground fault circuit interrupter (GFC) protection.  Use only within the voltage limits indicated.
• The product is powered at 5 V DC voltage and 1 A current. Only charge the product with the solar panel supplied by the manufacturer. In all other cases, use a USB DC 5V MAX 2A charger.
• Do not use any other charger. The product may be irreparably damaged. A full charge is recommended before first use.
• Do not use the product in case of a damaged cable or a broken lamp.
• In this case, it must be replaced exclusively by the manufacturer or Authorised Service Centre, in order to avoid any risk.
• The light source of this luminaire is not replaceable.
• When the light source reaches the end of its service life, the complete luminaire must be replaced.
• Any modification of the luminaire by the user will render the product out of warranty.
• Use only components supplied by Newgarden Spain, SL. Any electronic components other than those supplied may seriously damage the operation of the product.
• For decoration only. This bulb is not a toy.
• Do not allow children to play with and manipulate the bulb.

1. CE: Compliance with the European Directives for Electrical Safety and Electromagnetic Compatibility.
2. The crossed-out wheeled bin symbol on the appliance or packaging indicates, that this product is subject to a separate collection. Electrical and electronic equipment must be collected and not disposed of with household waste. Waste electrical and electronic equipment must be labelled with a collection system in accordance with Directive 2012/19/EU. Electrical and electronic equipment is hazardous to the environment and human health due to the presence of a hazardous substance in its composition. Proper storage and collection of one of these products contribute to the protection of the environment and public health and are basic conditions. Recycling of used electrical and electronic equipment. For more information on the delivery and collection of used electrical and electronic equipment, please contact your local authorities and the collection center authorized in this regard.
3. A Class Ill appliance is designed to be powered by a Separated or Safety Extra-Low Voltage (SELV) power supply. The voltage of a SELV supply is sufficiently low that, under normal conditions, a person can come into contact with it without risk of electric shock. It is therefore not necessary to incorporate the safety features of Class I and Class Il devices. For the compliance of Class ll medical devices it is not considered sufficient protection.
4. In the event of a crack in the protective screen, it must be replaced.
5. CMIN: Compliance with the regulations of the Kingdom of Morocco on Electrical Safety and Electromagnetic Compatibility, as applicable.

CHARGING INSTRUCTIONS

Lift the protective plastic cap and connect the micro USB charging cable (included). Connect the opposite end to the supplied solar panel. The solar panel should be unfolded and placed on a flat surface. If connected to a power adapter, use a USB charger DC 5V MAX 2A.

NOTE: Do not use the product while charging. The autonomy offered by solar charging varies depending on the orientation, exposure of the product, solar radiation and season of the year.

Instruction for use

The bulb can be controlled by the button on the bulb. By pressing this button we can turn the lamp on and off and change up to three different light intensities. First pulse: ON 1st intensity. Second pulse: ON 2nd intensity. Third pulse: ON 3rd intensity. Fourth pulse: OFF. We can also use the control to control the bulb remotely. To do this, remove the PVC protection from the batteries before using the control. Press the button on the remote control ON to switch the product on. The product will turn on and you will be able to adjust its intensity.

ON: Turn the lamp on / OFF: Turn off the lamp

1. Adjust the first intensity
2. Adjust the second intensity
3. Adjust the third intensity
   NOTE: In both cases, if the lamp is turned off and then on again, either from the button or the control knob, it always lights up at 100% intensity.

Hanging

If you want to position the bulb from a non-magnetizable surface, insert the hook into the holes on the top of the bulb provided for this purpose. Hang the bulb where desired.

Magnetic clamping

Take the bulb out of the box, clean the area where it is to be placed and place the flat top of the bulb close to a magnetic surface. It will stick to the surface thanks to the built-in magnet.

NEWGARDEN SPAIN SL
Av de Francia 5-15 P.I. Las Salinas 30840 Alhama de Murcia.
Murcia. Spain.

• T +34 968 978 806
• www.newgarden.es

References

• ▷ Newgarden | Fabricantes de Iluminación| Web Oficial

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>