Razor Power A2 Electric Scooter Instruction Manual
- June 3, 2024
- Razor
Table of Contents
Power A2 Electric Scooter
Instruction Manual POWER A2
COLLAR CLAMP REPLACEMENT PROCEDURES
PART # W13110002178
Power A2 Electric Scooter
Required Tools: (Not included) A. 5 mm Allen wrench
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF
and disconnect charger before conducting any assembly or maintenance
procedures. Failure to follow these steps in the correct order may cause
irreparable damage.
Step 1
Using a 5 mm Allen wrench, loosen the bolt from the collar clamp. Slide the
stem off from the fork.
Step 2
Slide collar clamp off from the stem and remove the bolt from the collar clamp
completely. This will allow you to pass the collar clamp through the throttle
cable.
Step 3
Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
Need Help?
Visit our website at www.razor.com or call toll-free
at 866-467-2967
Monday – Friday 8:00am – 5:00pm Pacific Time. 2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>