UNIVERSAL AUDIO SD-1 Standard Dynamic Microphone User Guide
- June 3, 2024
- Universal Audio
Table of Contents
UNIVERSAL AUDIO SD-1 Standard Dynamic Microphone User Guide
Congratulations
Your new UA Standard SD-1 Dynamic Microphone is designed to deliver years of uncompromising sonic performance.
The SD-1 is a high-quality dynamic broadcast mic suitable for a wide range of professional audio applications. With its cardioid polar pattern and smooth, transparent sound, it’s particularly well suited for capturing both music and speech.
There are two control switches below the XLR connector. Move switch #1 to its up position to reduce low frequency rumble. Move switch #2 to its down position for a gentle boost in the vocal articulation range. For a fuller sound, move the mic closer to the source.
The SD-1 comes with convenient Apollo Channel Strip Presets. These downloadable settings for UA’s Apollo audio interfaces give you professional results, instantly.
Get Apollo Interface Presets
To get custom Apollo Channel Strip Presets, scan the QR code or visit uaudio.com/mics/presets
Specifications
Description
Professional End-Address
Broadcast Microphone
Type
Dynamic
Polar Pattern
Cardioid
Frequency Response
50 Hz – 16 kHz
Output Impedance
200 Ohms
Sensitivity
-58 dB (0 dB = 1V/Pa at 1 kHz)
Adjustable Controls
Low Cut Filter (200 Hz): Off, On
Articulation Boost (3 – 5 kHz): Off, On
Output Connector
Balanced XLR3, pin 2 hot
Used electrical and electronic equipment should not be mixed with general household waste. Please dispose in accordance with local regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>