UNIVERSAL AUDIO OX Stomp Dynamic Speaker Emulator Stereo Pedal User Guide
- October 31, 2023
- Universal Audio
Table of Contents
UNIVERSAL AUDIO OX Stomp Dynamic Speaker Emulator Stereo Pedal
OX RIG
An OX Rig is a speaker cabinet, two cabinet microphones, room sound, and
effects. Knobs and switches control the active Rig. Choose the active Rig with
the foot switches.
CAUTION!
OX STOMP IS NOT A LOAD BOX. DO NOT CONNECT ANY POWERED AMPLIFIER TO OX INPUTS.
Power Supply
Isolated 9VDC, center-negative, 400 mA minimum, 2.1×5.5 mm barrel connector
(sold separately) Get More Get more features with the UAFX Control mobile app,
and find complete documentation at
uaudio.com/uafx/start
Important Safety Information
Caution: To help maintain the safety of your product, the chosen power
supply must be a certified power supply complying with Limited Power Source
(LPS) requirements with the following characteristics and electrical ratings:
Isolated 9VDC, center-negative, 400 mA minimum, 2.1×5.5 mm barrel connector.
Additional details at help.uaudio.com.
Before using this unit, be sure to carefully read the applicable items of
these operating instructions and the safety suggestions. Afterward, keep them
handy for future reference. Take special care to follow the warnings indicated
on the unit, as well as in the operating instructions.
- Read the instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use with attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This equipment does not contain a fuse or any other user-replaceable parts.
- A compliance marking label is provided on the bottom of the unit.
United States Class B Manual Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Japanese Class B Manual Statement
This is Class B equipment. Although this equipment is intended for use in a
residential environment, it could cause poor reception if used near a radio
television receiver. Please follow the instructions in the instruction
manual.)
License exempt. This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Taiwan NCC Warning Statement
The company’s products have obtained the NCC low-power radio frequency
equipment verification certificate according to the new warnings of “Low-power
radio frequency equipment technical specifications” as follows: “The low-power
radio frequency equipment that has obtained the verification certificate shall
not be changed by the company, firm or user without approval. Frequency,
increase power or change the features and functions of the original design.
The use of low-power radio frequency equipment shall not affect flight safety
and interfere with legal communications; continue to use. Used electrical and
electronic equipment should not be mixed with general household waste. Please
dispose in accordance with local regulations.
- IEC 62368-1
- FCC ID: 2AXKQ2029
- IC ID: 26610-2029.